lkml.org 
[lkml]   [2016]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] dt-bindings: power: add bindings for sbs-charger
Date
Adds device tree documentation for SBS charger compilant devices as defined
here: http://sbs-forum.org/specs/sbc110.pdf

Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@prodys.net>
---
.../bindings/power/supply/sbs_sbs-charger.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt

diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
new file mode 100644
index 0000000..b18ee2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
@@ -0,0 +1,22 @@
+SBS sbs-charger
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "sbs,sbs-charger"
+
+Optional properties :
+- interrupt-parent: Should be the phandle for the interrupt controller. Use in
+ conjunction with "interrupts".
+- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
+ "interrupt-parent". If an interrupt is not provided the driver will switch
+ automatically to polling.
+
+Example:
+
+ ltc4100@9 {
+ compatible = "sbs,sbs-charger";
+ reg = <0x9>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
--
2.7.4
\
 
 \ /
  Last update: 2016-11-23 12:21    [W:0.057 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site