lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: fsldma: t4240qds: drop "SG" CAP for DMA3
On Mon, Nov 21, 2016 at 12:52:49PM +0800, yanjiang.jin@windriver.com wrote:
> From: Yanjiang Jin <yanjiang.jin@windriver.com>
>
> T4240QDS DMA controller uses the external DMA control signals to start or
> restart a paused DMA transfer, acknowledge a DMA transfer in progress and
> also indicates a transfer completion.
> "scatterlist copy" depends on these signals.

How specifically does sg depend on these signals?

What about chips other than t4240?

> But as "T4240 Reference Manual" shown:
> "The external DMA control signals are available on DMA1 and DMA2. They are
> not supported by DMA3."
>
> So add an of_node property "fsl,external-dma-control-signals" to only DMA1
> and DMA2, it can prevent DMA3 from doing DMA_SG operations. Else we would
> get the below errors during doing dmatest:
>
> modprobe dmatest run=1 iterations=42
>
> dmatest: Started 1 threads using dma2chan0
> fsl-elo-dma ffe102300.dma: chan0: Transfer Error!
> fsl-elo-dma ffe102300.dma: chan0: irq: unhandled sr 0x00000080
> dmatest: dma2chan0-sg0: dstbuf[0x3954] not copied! Expected d8, got 2b
> ........................
> dmatest: dma2chan7-sg0: dstbuf[0x1c51] not copied! Expected df, got 2e
> dmatest: dma2chan7-sg0: 1301 errors suppressed
> dmatest: dma2chan7-sg0: result #42: 'data error' with
> src_off=0xf21 dst_off=0x1c32 len=0x535 (1333)
> dmatest: dma2chan7-sg0: summary 42 tests, 42 failures 2952 iops 23968 KB/s
>
> Signed-off-by: Yanjiang Jin <yanjiang.jin@windriver.com>
> ---
> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 6 ++++++
> drivers/dma/fsldma.c | 11 +++++++++--
> 2 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> index 68c4ead..155997d 100644
> --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
> @@ -1029,7 +1029,13 @@
> };
>
> /include/ "elo3-dma-0.dtsi"
> + dma@100300 {
> + fsl,external-dma-control-signals;
> + };
> /include/ "elo3-dma-1.dtsi"
> + dma@101300 {
> + fsl,external-dma-control-signals;
> + };
> /include/ "elo3-dma-2.dtsi"
>
> /include/ "qoriq-espi-0.dtsi"

Where is the binding for this property?

> diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c

The device tree update should be a separate patch from the driver, as
they would likely be merged via different trees.

> index 51c75bf..f7054f4 100644
> --- a/drivers/dma/fsldma.c
> +++ b/drivers/dma/fsldma.c
> @@ -1354,12 +1354,19 @@ static int fsldma_of_probe(struct platform_device *op)
> fdev->irq = irq_of_parse_and_map(op->dev.of_node, 0);
>
> dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
> - dma_cap_set(DMA_SG, fdev->common.cap_mask);
> +
> dma_cap_set(DMA_SLAVE, fdev->common.cap_mask);
> +
> + if (of_get_property(op->dev.of_node,
> + "fsl,external-dma-control-signals", NULL)) {
> + dma_cap_set(DMA_SG, fdev->common.cap_mask);
> + fdev->common.device_prep_dma_sg = fsl_dma_prep_sg;
> + } else
> + dma_cap_clear(DMA_SG, fdev->common.cap_mask);

This indentation is not very readable (continuation line aligned with
if-body).

How about:

if (of_property_read_bool(op->dev.of_node,
"fsl,external-dma-control-signals")) {
dma_cap_set(...);
...
} else {
dma_cap_clear(...);
}

Shortening the property name would also help (e.g. "fsl,dma-ext-ctrl").

I assume nothing bad will happen (other than performance loss) if the
updated driver is used with an existing device tree, and thus none of the
channels get DMA_SG?

Is there any need to explicitly clear the capablitity in the else path?
Wouldn't it be clear by default?

-Scott

\
 
 \ /
  Last update: 2016-11-22 08:26    [W:0.032 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site