lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5] [media] vb2: Add support for capture_dma_bidirectional queue flag
From
Date
Hi Mauro,

On 18/11/2016 19:59, Mauro Carvalho Chehab wrote:
> Em Tue, 25 Oct 2016 10:22:29 +0200
> Thierry Escande <thierry.escande@collabora.com> escreveu:
>
>> From: Pawel Osciak <posciak@chromium.org>
>>
>> When this flag is set for CAPTURE queues by the driver on calling
>> vb2_queue_init(), it forces the buffers on the queue to be
>> allocated/mapped with DMA_BIDIRECTIONAL direction flag instead of
>> DMA_FROM_DEVICE. This allows the device not only to write to the
>> buffers, but also read out from them. This may be useful e.g. for codec
>> hardware which may be using CAPTURE buffers as reference to decode
>> other buffers.
>>
>> This flag is ignored for OUTPUT queues as we don't want to allow HW to
>> be able to write to OUTPUT buffers.
>>
>> This patch introduces 2 macros:
>> VB2_DMA_DIR(q) returns the corresponding dma_dir for the passed queue
>> type, tanking care of the capture_dma_birectional flag.
>>
>> VB2_DMA_DIR_CAPTURE(d) is a test macro returning true if the passed DMA
>> direction refers to a capture buffer. This test is used to map virtual
>> addresses for writing and to mark pages as dirty.
>
> Why to add it? There's no other patch on this series with would
> justify its needs...

It is used by a Rockchip vpu driver which is only in the chromeos public
tree for now and will be upstreamed soon.

Regards,
Thierry

>>
>> Signed-off-by: Pawel Osciak <posciak@chromium.org>
>> Tested-by: Pawel Osciak <posciak@chromium.org>
>> Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
>> ---
>>
>> Changes in v2:
>> - Renamed use_dma_bidirectional field as capture_dma_bidirectional
>> - Added a VB2_DMA_DIR() macro
>>
>> Changes in v3:
>> - Get rid of dma_dir field and therefore squashed the previous patch
>>
>> Changes in v4:
>> - Fixed typos in include/media/videobuf2-core.h
>> - Added VB2_DMA_DIR_CAPTURE() test macro
>>
>> Changes in v5:
>> - Use is_output queue field in VB2_DMA_DIR() macro
>>
>> drivers/media/v4l2-core/videobuf2-core.c | 9 +++------
>> drivers/media/v4l2-core/videobuf2-dma-contig.c | 2 +-
>> drivers/media/v4l2-core/videobuf2-dma-sg.c | 5 +++--
>> drivers/media/v4l2-core/videobuf2-vmalloc.c | 4 ++--
>> include/media/videobuf2-core.h | 23 +++++++++++++++++++++++
>> 5 files changed, 32 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
>> index 21900202..22d6105 100644
>> --- a/drivers/media/v4l2-core/videobuf2-core.c
>> +++ b/drivers/media/v4l2-core/videobuf2-core.c
>> @@ -194,8 +194,7 @@ static void __enqueue_in_driver(struct vb2_buffer *vb);
>> static int __vb2_buf_mem_alloc(struct vb2_buffer *vb)
>> {
>> struct vb2_queue *q = vb->vb2_queue;
>> - enum dma_data_direction dma_dir =
>> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
>> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
>> void *mem_priv;
>> int plane;
>> int ret = -ENOMEM;
>> @@ -978,8 +977,7 @@ static int __qbuf_userptr(struct vb2_buffer *vb, const void *pb)
>> void *mem_priv;
>> unsigned int plane;
>> int ret = 0;
>> - enum dma_data_direction dma_dir =
>> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
>> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
>> bool reacquired = vb->planes[0].mem_priv == NULL;
>>
>> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
>> @@ -1096,8 +1094,7 @@ static int __qbuf_dmabuf(struct vb2_buffer *vb, const void *pb)
>> void *mem_priv;
>> unsigned int plane;
>> int ret = 0;
>> - enum dma_data_direction dma_dir =
>> - q->is_output ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
>> + enum dma_data_direction dma_dir = VB2_DMA_DIR(q);
>> bool reacquired = vb->planes[0].mem_priv == NULL;
>>
>> memset(planes, 0, sizeof(planes[0]) * vb->num_planes);
>> diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c
>> index fb6a177..a44e383 100644
>> --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c
>> +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c
>> @@ -507,7 +507,7 @@ static void *vb2_dc_get_userptr(struct device *dev, unsigned long vaddr,
>> buf->dma_dir = dma_dir;
>>
>> offset = vaddr & ~PAGE_MASK;
>> - vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE);
>> + vec = vb2_create_framevec(vaddr, size, VB2_DMA_DIR_CAPTURE(dma_dir));
>> if (IS_ERR(vec)) {
>> ret = PTR_ERR(vec);
>> goto fail_buf;
>> diff --git a/drivers/media/v4l2-core/videobuf2-dma-sg.c b/drivers/media/v4l2-core/videobuf2-dma-sg.c
>> index ecff8f49..51c98f6 100644
>> --- a/drivers/media/v4l2-core/videobuf2-dma-sg.c
>> +++ b/drivers/media/v4l2-core/videobuf2-dma-sg.c
>> @@ -238,7 +238,8 @@ static void *vb2_dma_sg_get_userptr(struct device *dev, unsigned long vaddr,
>> buf->offset = vaddr & ~PAGE_MASK;
>> buf->size = size;
>> buf->dma_sgt = &buf->sg_table;
>> - vec = vb2_create_framevec(vaddr, size, buf->dma_dir == DMA_FROM_DEVICE);
>> + vec = vb2_create_framevec(vaddr, size,
>> + VB2_DMA_DIR_CAPTURE(buf->dma_dir));
>> if (IS_ERR(vec))
>> goto userptr_fail_pfnvec;
>> buf->vec = vec;
>> @@ -291,7 +292,7 @@ static void vb2_dma_sg_put_userptr(void *buf_priv)
>> vm_unmap_ram(buf->vaddr, buf->num_pages);
>> sg_free_table(buf->dma_sgt);
>> while (--i >= 0) {
>> - if (buf->dma_dir == DMA_FROM_DEVICE)
>> + if (VB2_DMA_DIR_CAPTURE(buf->dma_dir))
>> set_page_dirty_lock(buf->pages[i]);
>> }
>> vb2_destroy_framevec(buf->vec);
>> diff --git a/drivers/media/v4l2-core/videobuf2-vmalloc.c b/drivers/media/v4l2-core/videobuf2-vmalloc.c
>> index ab3227b..76649bd 100644
>> --- a/drivers/media/v4l2-core/videobuf2-vmalloc.c
>> +++ b/drivers/media/v4l2-core/videobuf2-vmalloc.c
>> @@ -86,7 +86,7 @@ static void *vb2_vmalloc_get_userptr(struct device *dev, unsigned long vaddr,
>> buf->dma_dir = dma_dir;
>> offset = vaddr & ~PAGE_MASK;
>> buf->size = size;
>> - vec = vb2_create_framevec(vaddr, size, dma_dir == DMA_FROM_DEVICE);
>> + vec = vb2_create_framevec(vaddr, size, VB2_DMA_DIR_CAPTURE(dma_dir));
>> if (IS_ERR(vec)) {
>> ret = PTR_ERR(vec);
>> goto fail_pfnvec_create;
>> @@ -136,7 +136,7 @@ static void vb2_vmalloc_put_userptr(void *buf_priv)
>> pages = frame_vector_pages(buf->vec);
>> if (vaddr)
>> vm_unmap_ram((void *)vaddr, n_pages);
>> - if (buf->dma_dir == DMA_FROM_DEVICE)
>> + if (VB2_DMA_DIR_CAPTURE(buf->dma_dir))
>> for (i = 0; i < n_pages; i++)
>> set_page_dirty_lock(pages[i]);
>> } else {
>> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
>> index ac5898a..11d2e51 100644
>> --- a/include/media/videobuf2-core.h
>> +++ b/include/media/videobuf2-core.h
>> @@ -433,6 +433,9 @@ struct vb2_buf_ops {
>> * @quirk_poll_must_check_waiting_for_buffers: Return POLLERR at poll when QBUF
>> * has not been called. This is a vb1 idiom that has been adopted
>> * also by vb2.
>> + * @capture_dma_bidirectional: use DMA_BIDIRECTIONAL for CAPTURE buffers; this
>> + * allows HW to read from the CAPTURE buffers in
>> + * addition to writing; ignored for OUTPUT queues.
>> * @lock: pointer to a mutex that protects the vb2_queue struct. The
>> * driver can set this to a mutex to let the v4l2 core serialize
>> * the queuing ioctls. If the driver wants to handle locking
>> @@ -499,6 +502,7 @@ struct vb2_queue {
>> unsigned fileio_write_immediately:1;
>> unsigned allow_zero_bytesused:1;
>> unsigned quirk_poll_must_check_waiting_for_buffers:1;
>> + unsigned capture_dma_bidirectional:1;
>>
>> struct mutex *lock;
>> void *owner;
>> @@ -554,6 +558,25 @@ struct vb2_queue {
>> #endif
>> };
>>
>> +/*
>> + * Returns the corresponding DMA direction given the vb2_queue type (capture or
>> + * output). Returns DMA_BIDIRECTIONAL for capture buffers if the vb2_queue field
>> + * capture_dma_bidirectional is set by the driver.
>> + */
>> +#define VB2_DMA_DIR(q) ((q)->is_output ? DMA_TO_DEVICE \
>> + : (q)->capture_dma_bidirectional \
>> + ? DMA_BIDIRECTIONAL \
>> + : DMA_FROM_DEVICE)
>> +
>> +/*
>> + * Returns true if the DMA direction passed as parameter refers to a capture
>> + * buffer as capture buffers allow both FROM_DEVICE and BIDIRECTIONAL DMA
>> + * direction. This test is used to map virtual addresses for writing and to mark
>> + * pages as dirty.
>> + */
>> +#define VB2_DMA_DIR_CAPTURE(d) \
>> + ((d) == DMA_FROM_DEVICE || (d) == DMA_BIDIRECTIONAL)
>> +
>> /**
>> * vb2_plane_vaddr() - Return a kernel virtual address of a given plane
>> * @vb: vb2_buffer to which the plane in question belongs to
>
>
> Thanks,
> Mauro
>

\
 
 \ /
  Last update: 2016-11-22 14:31    [W:0.094 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site