lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [kvm-unit-tests PATCH v10 3/3] arm: pmu: Add CPI checking
On Mon, Nov 21, 2016 at 04:49:20PM -0600, Wei Huang wrote:
>
>
> On 11/21/2016 03:40 PM, Christopher Covington wrote:
> > Hi Wei,
> >
> > On 11/21/2016 03:24 PM, Wei Huang wrote:
> >> From: Christopher Covington <cov@codeaurora.org>
> >
> > I really appreciate your work on these patches. If for any or all of these
> > you have more lines added/modified than me (or using any other better
> > metric), please make sure to change the author to be you with
> > `git commit --amend --reset-author` or equivalent.
>
> Sure, I will if needed. Regarding your comments below, I will fix the
> patch series after Drew's comments, if any.
>
> >
> >> Calculate the numbers of cycles per instruction (CPI) implied by ARM
> >> PMU cycle counter values. The code includes a strict checking facility
> >> intended for the -icount option in TCG mode in the configuration file.
> >>
> >> Signed-off-by: Christopher Covington <cov@codeaurora.org>
> >> Signed-off-by: Wei Huang <wei@redhat.com>
> >> ---
> >> arm/pmu.c | 119 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
> >> arm/unittests.cfg | 14 +++++++
> >> 2 files changed, 132 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arm/pmu.c b/arm/pmu.c
> >> index 176b070..129ef1e 100644
> >> --- a/arm/pmu.c
> >> +++ b/arm/pmu.c
> >> @@ -104,6 +104,25 @@ static inline uint32_t id_dfr0_read(void)
> >> asm volatile("mrc p15, 0, %0, c0, c1, 2" : "=r" (val));
> >> return val;
> >> }
> >> +
> >> +/*
> >> + * Extra instructions inserted by the compiler would be difficult to compensate
> >> + * for, so hand assemble everything between, and including, the PMCR accesses
> >> + * to start and stop counting. Total cycles = isb + mcr + 2*loop = 2 + 2*loop.
> ^^^^^^^^^^^^
> I will change the comment above to "Total instrs".
>
> >> + */
> >> +static inline void precise_cycles_loop(int loop, uint32_t pmcr)
> >
> > Nit: I would call this precise_instrs_loop. How many cycles it takes is
> > IMPLEMENTATION DEFINED.
>
> You are right. The cycle indeed depends on the design. Will fix.
>
> >
> >> +{
> >> + asm volatile(
> >> + " mcr p15, 0, %[pmcr], c9, c12, 0\n"
> >> + " isb\n"
> >> + "1: subs %[loop], %[loop], #1\n"
> >> + " bgt 1b\n"
> >
> > Is there any chance we might need an isb here, to prevent the stop from happening
> > before or during the loop? Where ISBs are required, the Linux best practice is to
>
> In theory, I think this can happen when mcr is executed before all loop
> instructions completed, causing pmccntr_read() to miss some cycles. But
> QEMU TCG mode doesn't support out-order-execution. So the test
> condition, "cpi > 0 && cycles != i * cpi", will never be TRUE. Because
> cpi==0 in KVM, this same test condition won't be TRUE under KVM mode either.
>
> > diligently comment why they are needed. Perhaps it would be a good habit to
> > carry over into kvm-unit-tests.
>
> Agreed. Most isb() instructions were added following CP15 writes (not
> all CP15 writes, but at limited locations). We tried to follow what
> Linux kernel does in perf_event.c. If you feel that any isb() place
> needs special comment, I will be more than happy to add it.
>
> <snip>

No new comments from me. Thanks guys for catching the need to update the
comments.

drew

\
 
 \ /
  Last update: 2016-11-22 13:53    [W:0.076 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site