lkml.org 
[lkml]   [2016]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V3 1/4] Documentation: pv88080: Move binding document
Date
On Saturday, November 19, 2016 12:39 AM, Rob Herring wrote:

> On Fri, Nov 18, 2016 at 09:35:46AM +0900, Eric Jeong wrote:
> >
> > From: Eric Jeong <eric.jeong.opensource@diasemi.com>
> >
> > The change is to move pv88080 binding document from the regulator
> > directory to mfd binding directory for PV88080 PMIC MFD support.
> > And, GPIO properties are added.
> >
> >
> > Signed-off-by: Eric Jeong <eric.jeong.opensource@diasemi.com>
> >
> > ---
> > This patch applies against linux-next and next-20161117
> >
> > Hi,
> >
> > Change since PATCH V2
> > - Added property and description for gpio
> >
> > Change since PATCH V1
> > - Patch separated from PATCH V1
> >
> > Regards,
> > Eric Jeong, Dialog Semiconductor Ltd.
> >
> >
> > .../bindings/{regulator => mfd}/pv88080.txt | 16 +++++++++++++++-
> > 1 file changed, 15 insertions(+), 1 deletion(-) rename
> > Documentation/devicetree/bindings/{regulator => mfd}/pv88080.txt (79%)
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt
> > b/Documentation/devicetree/bindings/mfd/pv88080.txt
> > similarity index 79%
> > rename from Documentation/devicetree/bindings/regulator/pv88080.txt
> > rename to Documentation/devicetree/bindings/mfd/pv88080.txt
> > index e6e4b9c8..7e24f95 100644
> > --- a/Documentation/devicetree/bindings/regulator/pv88080.txt
> > +++ b/Documentation/devicetree/bindings/mfd/pv88080.txt
> > @@ -1,4 +1,4 @@
> > -* Powerventure Semiconductor PV88080 Voltage Regulator
> > +* Powerventure Semiconductor PV88080 PMIC
> >
> > Required properties:
> > - compatible: Must be one of the following, depending on the @@ -16,8
> > +16,15 @@ Required properties:
> > standard binding for regulators; see regulator.txt.
> > BUCK1, BUCK2, BUCK3 and HVBUCK.
> >
> > +- gpio-controller: Marks the device node as a GPIO controller.
> > +- #gpio-cells: Should be 2. See gpio.txt in this directory
> > + for a description of the cells format.
> > +
> > Optional properties:
> > +- ngpios : Number of in-use slots of available slots for GPIO.
> > + Maximum is 2.
> > - Any optional property defined in regulator.txt
> > + and gpio.txt for more information.
> >
> > Example:
> >
> > @@ -27,6 +34,13 @@ Example:
> > interrupt-parent = <&gpio>;
> > interrupts = <24 24>;
> >
> > + gpioex {
>
> gpio-controller {
>
> > + compatible = "pvs,pv88080-gpio";
>
> Is this documented?

No, It's not documented. I will update this document with the compatible string.

>
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + ngpios = <2>;
> > + };
> > +
> > regulators {
> > BUCK1 {
> > regulator-name = "buck1";
> > --
> > end-of-patch for PATCH V3
> >

\
 
 \ /
  Last update: 2016-11-22 10:21    [W:0.045 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site