lkml.org 
[lkml]   [2016]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: phy: micrel: fix KSZ8041FTL supported value
Date
Fix setting of SUPPORTED_FIBRE bit as it was not present in features
of KSZ8041.

Signed-off-by: Kirill Esipov <yesipov@gmail.com>
---
drivers/net/phy/micrel.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 081df68..ea92d52 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -318,12 +318,12 @@ static int ksz8041_config_init(struct phy_device *phydev)
/* Limit supported and advertised modes in fiber mode */
if (of_property_read_bool(of_node, "micrel,fiber-mode")) {
phydev->dev_flags |= MICREL_PHY_FXEN;
- phydev->supported &= SUPPORTED_FIBRE |
- SUPPORTED_100baseT_Full |
+ phydev->supported &= SUPPORTED_100baseT_Full |
SUPPORTED_100baseT_Half;
- phydev->advertising &= ADVERTISED_FIBRE |
- ADVERTISED_100baseT_Full |
+ phydev->supported |= SUPPORTED_FIBRE;
+ phydev->advertising &= ADVERTISED_100baseT_Full |
ADVERTISED_100baseT_Half;
+ phydev->advertising |= ADVERTISED_FIBRE;
phydev->autoneg = AUTONEG_DISABLE;
}

--
2.7.4
\
 
 \ /
  Last update: 2016-11-21 17:54    [W:0.029 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site