lkml.org 
[lkml]   [2016]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/5] staging: emxx_udc: emxx_udc.c Blank lines after {
Date
Make suggested checkpatch modification for
CHECK: Blank lines aren't necessary after an
open brace '{'

Signed-off-by: Walt Feasel <waltfeasel@gmail.com>
---
drivers/staging/emxx_udc/emxx_udc.c | 13 -------------
1 file changed, 13 deletions(-)

diff --git a/drivers/staging/emxx_udc/emxx_udc.c b/drivers/staging/emxx_udc/emxx_udc.c
index 31f4206..409761a 100644
--- a/drivers/staging/emxx_udc/emxx_udc.c
+++ b/drivers/staging/emxx_udc/emxx_udc.c
@@ -153,7 +153,6 @@ static void _nbu2ss_ep0_complete(struct usb_ep *_ep, struct usb_request *_req)
udc = (struct nbu2ss_udc *)_req->context;
p_ctrl = &udc->ctrl;
if ((p_ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
-
if (p_ctrl->bRequest == USB_REQ_SET_FEATURE) {
/*-------------------------------------------------*/
/* SET_FEATURE */
@@ -753,7 +752,6 @@ static int _nbu2ss_ep0_out_transfer(
/* Receive data confirmation */
iRecvLength = _nbu2ss_readl(&udc->p_regs->EP0_LENGTH) & EP0_LDATA;
if (iRecvLength != 0) {
-
fRcvZero = 0;

iRemainSize = req->req.length - req->req.actual;
@@ -930,7 +928,6 @@ static int _nbu2ss_epn_out_pio(

if ((req->req.actual == req->req.length)
|| ((req->req.actual % ep->ep.maxpacket) != 0)) {
-
result = 0;
}

@@ -1001,7 +998,6 @@ static int _nbu2ss_epn_out_transfer(
} else {
if ((req->req.actual == req->req.length)
|| ((req->req.actual % ep->ep.maxpacket) != 0)) {
-
result = 0;
}
}
@@ -1557,7 +1553,6 @@ static void _nbu2ss_epn_set_stall(
for (limit_cnt = 0
; limit_cnt < IN_DATA_EMPTY_COUNT
; limit_cnt++) {
-
regdata = _nbu2ss_readl(
&preg->EP_REGS[ep->epnum - 1].EP_STATUS);

@@ -1584,7 +1579,6 @@ static int std_req_get_status(struct nbu2ss_udc *udc)

if ((udc->ctrl.wValue != 0x0000)
|| (direction != USB_DIR_IN)) {
-
return result;
}

@@ -1982,7 +1976,6 @@ static inline void _nbu2ss_epn_in_int(

} else {
if (req->zero && ((req->req.actual % ep->ep.maxpacket) == 0)) {
-
status =
_nbu2ss_readl(&preg->EP_REGS[ep->epnum - 1].EP_STATUS);

@@ -2330,7 +2323,6 @@ static inline void _nbu2ss_check_vbus(struct nbu2ss_udc *udc)
/* VBUS ON Check*/
reg_dt = gpio_get_value(VBUS_VALUE);
if (reg_dt == 0) {
-
udc->linux_suspended = 0;

_nbu2ss_reset_controller(udc);
@@ -2502,7 +2494,6 @@ static irqreturn_t _nbu2ss_udc_irq(int irq, void *_udc)
int_bit = status >> 8;

for (epnum = 0; epnum < NUM_ENDPOINTS; epnum++) {
-
if (0x01 & int_bit)
_nbu2ss_ep_int(udc, epnum);

@@ -2548,7 +2539,6 @@ static int nbu2ss_ep_enable(
ep_type = usb_endpoint_type(desc);
if ((ep_type == USB_ENDPOINT_XFER_CONTROL)
|| (ep_type == USB_ENDPOINT_XFER_ISOC)) {
-
pr_err(" *** %s, bat bmAttributes\n", __func__);
return -EINVAL;
}
@@ -2559,7 +2549,6 @@ static int nbu2ss_ep_enable(

if ((!udc->driver)
|| (udc->gadget.speed == USB_SPEED_UNKNOWN)) {
-
dev_err(ep->udc->dev, " *** %s, udc !!\n", __func__);
return -ESHUTDOWN;
}
@@ -2677,7 +2666,6 @@ static int nbu2ss_ep_queue(
if (unlikely
(!_req->complete || !_req->buf
|| !list_empty(&req->queue))) {
-
if (!_req->complete)
pr_err("udc: %s --- !_req->complete\n", __func__);

@@ -2736,7 +2724,6 @@ static int nbu2ss_ep_queue(
list_add_tail(&req->queue, &ep->queue);

if (bflag && !ep->stalled) {
-
result = _nbu2ss_start_transfer(udc, ep, req, FALSE);
if (result < 0) {
dev_err(udc->dev, " *** %s, result = %d\n", __func__,
--
2.1.4
\
 
 \ /
  Last update: 2016-11-21 16:09    [W:0.038 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site