lkml.org 
[lkml]   [2016]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] regulator: max77620: add support to configure MPOK
On Thu, 17 Nov 2016, Venkat Reddy Talla wrote:

> Adding support to configure regulator POK mapping bit
> to control nRST_IO and GPIO1 POK function.
> In tegra based platform which uses MAX20024 pmic, when
> some of regulators are configured FPS_NONE(flexible power sequencer)
> causes PMIC GPIO1 to go low which lead to various other rails turning off,
> to avoid this MPOK bit of those regulators need to be set to 0
> so that PMIC GPIO1 will not go low.
>
> Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
>
> ---
> changes in v2:
> - updated commit message for the patch
> - address review comments
> ---
> drivers/regulator/max77620-regulator.c | 46 ++++++++++++++++++++++++++++++++++
> include/linux/mfd/max77620.h | 2 ++

For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

> 2 files changed, 48 insertions(+)
>
> diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
> index a1b49a6..850b14c 100644
> --- a/drivers/regulator/max77620-regulator.c
> +++ b/drivers/regulator/max77620-regulator.c
> @@ -81,6 +81,7 @@ struct max77620_regulator_pdata {
> int suspend_fps_pd_slot;
> int suspend_fps_pu_slot;
> int current_mode;
> + int power_ok;
> int ramp_rate_setting;
> };
>
> @@ -351,11 +352,48 @@ static int max77620_set_slew_rate(struct max77620_regulator *pmic, int id,
> return 0;
> }
>
> +static int max77620_config_power_ok(struct max77620_regulator *pmic, int id)
> +{
> + struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
> + struct max77620_regulator_info *rinfo = pmic->rinfo[id];
> + struct max77620_chip *chip = dev_get_drvdata(pmic->dev->parent);
> + u8 val, mask;
> + int ret;
> +
> + switch (chip->chip_id) {
> + case MAX20024:
> + if (rpdata->power_ok >= 0) {
> + if (rinfo->type == MAX77620_REGULATOR_TYPE_SD)
> + mask = MAX20024_SD_CFG1_MPOK_MASK;
> + else
> + mask = MAX20024_LDO_CFG2_MPOK_MASK;
> +
> + val = rpdata->power_ok ? mask : 0;
> +
> + ret = regmap_update_bits(pmic->rmap, rinfo->cfg_addr,
> + mask, val);
> + if (ret < 0) {
> + dev_err(pmic->dev, "Reg 0x%02x update failed %d\n",
> + rinfo->cfg_addr, ret);
> + return ret;
> + }
> + }
> + break;
> +
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> static int max77620_init_pmic(struct max77620_regulator *pmic, int id)
> {
> struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
> int ret;
>
> + max77620_config_power_ok(pmic, id);
> +
> /* Update power mode */
> ret = max77620_regulator_get_power_mode(pmic, id);
> if (ret < 0)
> @@ -595,6 +633,12 @@ static int max77620_of_parse_cb(struct device_node *np,
> np, "maxim,suspend-fps-power-down-slot", &pval);
> rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1;
>
> + ret = of_property_read_u32(np, "maxim,power-ok-control", &pval);
> + if (!ret)
> + rpdata->power_ok = pval;
> + else
> + rpdata->power_ok = -1;
> +
> ret = of_property_read_u32(np, "maxim,ramp-rate-setting", &pval);
> rpdata->ramp_rate_setting = (!ret) ? pval : 0;
>
> @@ -807,6 +851,8 @@ static int max77620_regulator_resume(struct device *dev)
> for (id = 0; id < MAX77620_NUM_REGS; id++) {
> reg_pdata = &pmic->reg_pdata[id];
>
> + max77620_config_power_ok(pmic, id);
> +
> max77620_regulator_set_fps_slots(pmic, id, false);
> if (reg_pdata->active_fps_src < 0)
> continue;
> diff --git a/include/linux/mfd/max77620.h b/include/linux/mfd/max77620.h
> index 3ca0af07..ad2a9a8 100644
> --- a/include/linux/mfd/max77620.h
> +++ b/include/linux/mfd/max77620.h
> @@ -180,6 +180,7 @@
> #define MAX77620_SD_CFG1_FPWM_SD_MASK BIT(2)
> #define MAX77620_SD_CFG1_FPWM_SD_SKIP 0
> #define MAX77620_SD_CFG1_FPWM_SD_FPWM BIT(2)
> +#define MAX20024_SD_CFG1_MPOK_MASK BIT(1)
> #define MAX77620_SD_CFG1_FSRADE_SD_MASK BIT(0)
> #define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0
> #define MAX77620_SD_CFG1_FSRADE_SD_ENABLE BIT(0)
> @@ -187,6 +188,7 @@
> /* LDO_CNFG2 */
> #define MAX77620_LDO_POWER_MODE_MASK 0xC0
> #define MAX77620_LDO_POWER_MODE_SHIFT 6
> +#define MAX20024_LDO_CFG2_MPOK_MASK BIT(2)
> #define MAX77620_LDO_CFG2_ADE_MASK BIT(1)
> #define MAX77620_LDO_CFG2_ADE_DISABLE 0
> #define MAX77620_LDO_CFG2_ADE_ENABLE BIT(1)

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-11-21 14:07    [W:0.074 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site