lkml.org 
[lkml]   [2016]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] inherit dma configuration from parent dev
Date
For xhci-hcd platform device, all the DMA parameters are not
configured properly, notably dma ops for dwc3 devices.

The idea here is that you pass in the parent of_node along
with the child device pointer, so it would behave exactly
like the parent already does. The difference is that it also
handles all the other attributes besides the mask.


Arnd Bergmann (6):
usb: separate out sysdev pointer from usb_bus
usb: chipidea: use bus->sysdev for DMA configuration
usb: ehci: fsl: use bus->sysdev for DMA configuration
usb: xhci: use bus->sysdev for DMA configuration
usb: dwc3: use bus->sysdev for DMA configuration
usb: dwc3: Do not set dma coherent mask

drivers/usb/chipidea/core.c | 3 ---
drivers/usb/chipidea/host.c | 3 ++-
drivers/usb/chipidea/udc.c | 10 +++++----
drivers/usb/core/buffer.c | 12 +++++------
drivers/usb/core/hcd.c | 48 +++++++++++++++++++++++++-----------------
drivers/usb/core/usb.c | 18 ++++++++--------
drivers/usb/dwc3/core.c | 28 ++++++++++++------------
drivers/usb/dwc3/core.h | 1 +
drivers/usb/dwc3/dwc3-exynos.c | 10 ---------
drivers/usb/dwc3/dwc3-st.c | 1 -
drivers/usb/dwc3/ep0.c | 8 +++----
drivers/usb/dwc3/gadget.c | 37 ++++++++++++++++----------------
drivers/usb/dwc3/host.c | 12 ++++-------
drivers/usb/host/ehci-fsl.c | 4 ++--
drivers/usb/host/xhci-mem.c | 12 +++++------
drivers/usb/host/xhci-plat.c | 33 +++++++++++++++++++++++------
drivers/usb/host/xhci.c | 15 +++++++++----
include/linux/usb.h | 1 +
include/linux/usb/hcd.h | 3 +++
19 files changed, 144 insertions(+), 115 deletions(-)

--
2.1.0

\
 
 \ /
  Last update: 2016-11-02 06:55    [W:0.116 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site