lkml.org 
[lkml]   [2016]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 00/14] pinctrl-sx150x: Various bug-fixes and code simplifications
From
Date
On 11/02/2016 12:01 PM, Neil Armstrong wrote:
> On 11/01/2016 04:57 PM, Andrey Smirnov wrote:
>> Linus, Neil:
>>
>> I've had some help and got my hardware setup modified to enable IRQ
>> functionality testing, so ended up looking at the code of SX150x more
>> resulting in some code improvements (hopefully) and bugfixes.
>>
>> There are many small changes each of which is probably better
>> described by corresponding commit's message, however the most
>> porminenet changes of the whole patchset are the switch to regmap API
>> (patches ## 7,8) and reduction of locking (patch # 9)
>>
>> Please let me know what you think.
>>
>> Thanks,
>> Andrey
>>
>> Andrey Smirnov (14):
>> pinctrl-sx150x: Rely on of_modalias_node for OF matching
>> pinctrl-sx150x: Add SX1503 specific data
>> pinctrl-sx150x: Replace magic number in sx150x_init_hw
>> pinctrl-sx150x: Fix incorrect constant in sx150x_init_hw
>> pinctrl-sx150x: Move some code out of sx150x_init_hw
>> pinctrl-sx150x: Improve sx150x_init_misc for SX1504/5/6
>> pinctrl-sx150x: Convert driver to use regmap API
>> pinctrl-sx150x: Replace sx150x_*_cfg by means of regmap API
>> pinctrl-sx150x: Remove excessive locking
>> pinctrl-sx150x: Improve oscio GPIO functions
>> pinctrl-sx150x: Simplify interrupt handler
>> pinctrl-sx150x: Use handle_bad_irq instead of handle_edge_irq
>> pinctrl-sx150x: Remove magic numbers from sx150x_irq_set_type
>> pinctrl-sx150x: Remove magic numbers from sx150x_reset
>>
>> drivers/pinctrl/pinctrl-sx150x.c | 753 +++++++++++++++++++++------------------
>> 1 file changed, 416 insertions(+), 337 deletions(-)
>>
>
> Hi Andrey,
>
> This is good, you went faster than me !
>
> Small point, could you add Kconfig dependency on REGMAP ?
>
> I will try out this patchset and hopefully get you a Tested-by in the next few days.
>
> Neil
>

Great, Successfully worked on 4.9-rc2 on my BeagleBone black installation with a SX1509.
I got some rising and falling interrupts using gpio-event-mon.

Small NIT: please add the sx1503 entry in the Kconfig desc and in the pinctrl-sx150x.txt bindings.

Tested-by: Neil Armstrong <narmstrong@baylibre.com>

With the Kconfig and bindings changes :
Acked-by: Neil Armstrong <narmstrong@baylibre.com>

Thanks,
Neil

\
 
 \ /
  Last update: 2016-11-02 14:34    [W:0.113 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site