lkml.org 
[lkml]   [2016]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/2] regulator: pwm: DT: Add ramp delay for exponential voltage transition
Date
Some PWM regulator has the exponential transition in voltage change as
opposite to fixed slew-rate linear transition on other regulators.
For such PWM regulators, add the property to tell that voltage change
is exponential and having fixed delay for any level of change.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
CC: Douglas Anderson <dianders@chromium.org>
CC: Aleksandr Frid <afrid@nvidia.com>

---
This patch is continuation of discussion on patch
regulator: pwm: Fix regulator ramp delay for continuous mode
https://patchwork.kernel.org/patch/9216857/
where is it discussed to have separate property for PWM which has
exponential voltage transition.

Changes from V1:
- Pass the flag to tell that voltage ramp is exponential instead of
providing delay.
---
.../devicetree/bindings/regulator/pwm-regulator.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index 3aeba9f..2d9ef3a 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -54,6 +54,18 @@ Optional properties:
--------------------
- enable-gpios: GPIO to use to enable/disable the regulator

+- voltage-ramp-exponential: Boolean, Some of PWM regulator has the exponential
+ transition in voltage ramp as opposite to fixed
+ slew-rate linear transition on other regulators.
+ For such PWM regulator, presence of this property will
+ tell that value of the regulator ramp delay provided by
+ DT property "regulator-ramp-delay" is exponential and
+ fixed delay for any voltage level change.
+ If PWM regulator supports the fixed linear slew rate
+ then this property should be absent from DT node and
+ property "regulator-ramp-delay" is used as linear slew
+ rate.
+
Any property defined as part of the core regulator binding can also be used.
(See: ../regulator/regulator.txt)

--
2.1.4
\
 
 \ /
  Last update: 2016-11-18 15:52    [W:0.101 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site