lkml.org 
[lkml]   [2016]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pinctrl: nomadik: split up and comments MC0 pins
Date
When debugging it helps to see exactly which pin goes where,
so make it very detailed.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
index 8392083514fb..af4814479eb0 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik-db8500.c
@@ -379,13 +379,24 @@ static const unsigned msp0txrx_a_1_pins[] = { DB8500_PIN_AC4, DB8500_PIN_AC3 };
static const unsigned msp0tfstck_a_1_pins[] = { DB8500_PIN_AF3, DB8500_PIN_AE3 };
static const unsigned msp0rfsrck_a_1_pins[] = { DB8500_PIN_AD3, DB8500_PIN_AD4 };
/* Basic pins of the MMC/SD card 0 interface */
-static const unsigned mc0_a_1_pins[] = { DB8500_PIN_AC2, DB8500_PIN_AC1,
- DB8500_PIN_AB4, DB8500_PIN_AA3, DB8500_PIN_AA4, DB8500_PIN_AB2,
- DB8500_PIN_Y4, DB8500_PIN_Y2, DB8500_PIN_AA2, DB8500_PIN_AA1 };
+static const unsigned mc0_a_1_pins[] = { DB8500_PIN_AC2, /* MC0_CMDDIR */
+ DB8500_PIN_AC1, /* MC0_DAT0DIR */
+ DB8500_PIN_AB4, /* MC0_DAT2DIR */
+ DB8500_PIN_AA3, /* MC0_FBCLK */
+ DB8500_PIN_AA4, /* MC0_CLK */
+ DB8500_PIN_AB2, /* MC0_CMD */
+ DB8500_PIN_Y4, /* MC0_DAT0 */
+ DB8500_PIN_Y2, /* MC0_DAT1 */
+ DB8500_PIN_AA2, /* MC0_DAT2 */
+ DB8500_PIN_AA1 /* MC0_DAT3 */
+};
/* Often only 4 bits are used, then these are not needed (only used for MMC) */
-static const unsigned mc0_dat47_a_1_pins[] = { DB8500_PIN_W2, DB8500_PIN_W3,
- DB8500_PIN_V3, DB8500_PIN_V2};
-static const unsigned mc0dat31dir_a_1_pins[] = { DB8500_PIN_AB3 };
+static const unsigned mc0_dat47_a_1_pins[] = { DB8500_PIN_W2, /* MC0_DAT4 */
+ DB8500_PIN_W3, /* MC0_DAT5 */
+ DB8500_PIN_V3, /* MC0_DAT6 */
+ DB8500_PIN_V2 /* MC0_DAT7 */
+};
+static const unsigned mc0dat31dir_a_1_pins[] = { DB8500_PIN_AB3 }; /* MC0_DAT31DIR */
/* MSP1 can only be on these pins, but TXD and RXD can be flipped */
static const unsigned msp1txrx_a_1_pins[] = { DB8500_PIN_AF2, DB8500_PIN_AG2 };
static const unsigned msp1_a_1_pins[] = { DB8500_PIN_AE1, DB8500_PIN_AE2 };
--
2.7.4
\
 
 \ /
  Last update: 2016-11-17 09:48    [W:0.031 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site