lkml.org 
[lkml]   [2016]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] net/phy/vitesse: Configure RGMII skew on VSC8601, if needed
From
From: Alexandru Gagniuc <alex.g@adaptrum.com>
Date: Wed, 16 Nov 2016 01:02:33 -0800

> With RGMII, we need a 1.5 to 2ns skew between clock and data lines. The
> VSC8601 can handle this internally. While the VSC8601 can set more
> fine-grained delays, the standard skew settings work out of the box.
> The same heuristic is used to determine when this skew should be enabled
> as in vsc824x_config_init().
>
> Tested on custom board with AM3352 SOC and VSC801 PHY.
>
> Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
> ---
> Changes since v1:
> * Added comment detailing applicability to different RGMII interfaces.

Applied.

\
 
 \ /
  Last update: 2016-11-16 23:54    [W:0.053 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site