lkml.org 
[lkml]   [2016]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v16 03/15] clocksource/drivers/arm_arch_timer: Improve printk relevant code
Date
From: Fu Wei <fu.wei@linaro.org>

This patch defines pr_fmt(fmt) for all pr_* functions,
then the pr_* doesn't need to add "arch_timer:" everytime.

According to the suggestion from checkpatch.pl:
(1) delete some Blank Spaces in arch_timer_banner;
(2) delete a redundant Tab in a bland line of arch_timer_init(void)

No functional change.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
---
drivers/clocksource/arm_arch_timer.c | 49 ++++++++++++++++++------------------
1 file changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 63bb532..15341cf 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -32,6 +32,9 @@

#include <clocksource/arm_arch_timer.h>

+#undef pr_fmt
+#define pr_fmt(fmt) "arch_timer: " fmt
+
#define CNTTIDR 0x08
#define CNTTIDR_VIRT(n) (BIT(1) << ((n) * 4))

@@ -504,22 +507,22 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)

/* Check the timer frequency. */
if (arch_timer_rate == 0)
- pr_warn("Architected timer frequency not available\n");
+ pr_warn("frequency not available\n");
}

static void arch_timer_banner(unsigned type)
{
- pr_info("Architected %s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
- type & ARCH_CP15_TIMER ? "cp15" : "",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
- type & ARCH_MEM_TIMER ? "mmio" : "",
- (unsigned long)arch_timer_rate / 1000000,
- (unsigned long)(arch_timer_rate / 10000) % 100,
- type & ARCH_CP15_TIMER ?
- (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
+ pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
+ type & ARCH_CP15_TIMER ? "cp15" : "",
+ type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? " and " : "",
+ type & ARCH_MEM_TIMER ? "mmio" : "",
+ (unsigned long)arch_timer_rate / 1000000,
+ (unsigned long)(arch_timer_rate / 10000) % 100,
+ type & ARCH_CP15_TIMER ?
+ (arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
"",
- type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
- type & ARCH_MEM_TIMER ?
+ type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ? "/" : "",
+ type & ARCH_MEM_TIMER ?
arch_timer_mem_use_virtual ? "virt" : "phys" :
"");
}
@@ -618,8 +621,7 @@ static void __init arch_counter_register(unsigned type)

static void arch_timer_stop(struct clock_event_device *clk)
{
- pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
- clk->irq, smp_processor_id());
+ pr_debug("disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id());

disable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi]);
if (arch_timer_has_nonsecure_ppi())
@@ -712,8 +714,7 @@ static int __init arch_timer_register(void)
}

if (err) {
- pr_err("arch_timer: can't register interrupt %d (%d)\n",
- ppi, err);
+ pr_err("can't register interrupt %d (%d)\n", ppi, err);
goto out_free;
}

@@ -766,7 +767,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)

ret = request_irq(irq, func, IRQF_TIMER, "arch_mem_timer", &t->evt);
if (ret) {
- pr_err("arch_timer: Failed to request mem timer irq\n");
+ pr_err("Failed to request mem timer irq\n");
kfree(t);
}

@@ -844,7 +845,7 @@ static int __init arch_timer_init(void)
}

if (!has_ppi) {
- pr_warn("arch_timer: No interrupt available, giving up\n");
+ pr_warn("No interrupt available, giving up\n");
return -EINVAL;
}
}
@@ -858,7 +859,7 @@ static int __init arch_timer_init(void)
return ret;

arch_timer_kvm_info.virtual_irq = arch_timer_ppi[VIRT_PPI];
-
+
return 0;
}

@@ -867,7 +868,7 @@ static int __init arch_timer_of_init(struct device_node *np)
int i;

if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+ pr_warn("multiple nodes in dt, skipping\n");
return 0;
}

@@ -911,7 +912,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
arch_timers_present |= ARCH_MEM_TIMER;
cntctlbase = of_iomap(np, 0);
if (!cntctlbase) {
- pr_err("arch_timer: Can't find CNTCTLBase\n");
+ pr_err("Can't find CNTCTLBase\n");
return -ENXIO;
}

@@ -926,7 +927,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
u32 cntacr;

if (of_property_read_u32(frame, "frame-number", &n)) {
- pr_err("arch_timer: Missing frame-number\n");
+ pr_err("Missing frame-number\n");
of_node_put(frame);
goto out;
}
@@ -955,7 +956,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
ret= -ENXIO;
base = arch_counter_base = of_iomap(best_frame, 0);
if (!base) {
- pr_err("arch_timer: Can't map frame's registers\n");
+ pr_err("Can't map frame's registers\n");
goto out;
}

@@ -966,7 +967,7 @@ static int __init arch_timer_mem_init(struct device_node *np)

ret = -EINVAL;
if (!irq) {
- pr_err("arch_timer: Frame missing %s irq",
+ pr_err("Frame missing %s irq",
arch_timer_mem_use_virtual ? "virt" : "phys");
goto out;
}
@@ -1008,7 +1009,7 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
struct acpi_table_gtdt *gtdt;

if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: already initialized, skipping\n");
+ pr_warn("already initialized, skipping\n");
return -EINVAL;
}

--
2.7.4
\
 
 \ /
  Last update: 2016-11-16 14:51    [W:0.218 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site