lkml.org 
[lkml]   [2016]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/3] ARM: dts: sun7i: BPI-M1+ USB support
Date
Hi Maxime,

These are the remaining patches of my BPI-M1+ fixes series from July.

Changes since v1:

- Split out USB PHY enable patch.

- Dropped custom OPP table. Tested the A20 default one with
cpufreq-ljt-stress-test and it seemed stable.

- Dropped voltage range for cpu supply regulator to normal 1.0V ~ 1.4V.

- Dropped pinmux setting for OTG ID pin.


Please have a look.

Regards
ChenYu

Chen-Yu Tsai (3):
ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support
ARM: dts: sun7i: bananapi-m1-plus: Add PMIC regulators
ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG

arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 60 ++++++++++++++++++++++--
1 file changed, 56 insertions(+), 4 deletions(-)

--
2.10.2

\
 
 \ /
  Last update: 2016-11-15 14:51    [W:0.051 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site