Messages in this thread | | | Subject | Re: [PATCH 3/4] PCI: dra7xx: Add support to force RC to work in GEN1 mode | From | Kishon Vijay Abraham I <> | Date | Sat, 12 Nov 2016 12:40:10 +0530 |
| |
Hi,
On Saturday 12 November 2016 02:45 AM, Bjorn Helgaas wrote: > Hi Kishon, > > On Tue, Oct 11, 2016 at 06:28:34PM +0530, Kishon Vijay Abraham I wrote: >> PCIe in AM57x/DRA7x devices is by default >> configured to work in GEN2 mode. However there >> may be situations when working in GEN1 mode is >> desired. One example is limitation i925 (PCIe GEN2 >> mode not supported at junction temperatures < 0C). >> >> Add support to force Root Complex to work in GEN1 >> mode if so desired, but don't force GEN1 mode on >> any board just yet. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> >> Signed-off-by: Sekhar Nori <nsekhar@ti.com> >> --- >> Documentation/devicetree/bindings/pci/ti-pci.txt | 1 + >> drivers/pci/host/pci-dra7xx.c | 27 ++++++++++++++++++++++ >> 2 files changed, 28 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt >> index 60e2516..a3d6ca3 100644 >> --- a/Documentation/devicetree/bindings/pci/ti-pci.txt >> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt >> @@ -25,6 +25,7 @@ PCIe Designware Controller >> >> Optional Property: >> - gpios : Should be added if a gpio line is required to drive PERST# line >> + - ti,pcie-is-gen1 : Force the PCIe controller to work in GEN1 (2.5 GT/s). > > Can we use "max-link-speed" so it's similar to imx6?
yeah, maybe we should make it a generic PCI property?
Thanks Kishon
| |