lkml.org 
[lkml]   [2016]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 08/26] staging: iio: tsl2583: unify function and variable prefix to tsl2583_
From
Date
On 12/11/16 18:19, Brian Masney wrote:
> Some functions and variables were prefixed with either taos, tsl258x,
> taos2583, or tsl2583. Change everything to use the tsl2583 prefix since
> that is the name of the .c file. The taos_settings member inside the
> taos_settings struct was renamed to als_settings.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
Applied.
> ---
> drivers/staging/iio/light/tsl2583.c | 214 ++++++++++++++++++------------------
> 1 file changed, 107 insertions(+), 107 deletions(-)
>
> diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
> index 5d74e0c1..5a82a26 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -28,35 +28,35 @@
> #include <linux/iio/sysfs.h>
>
> /* Device Registers and Masks */
> -#define TSL258X_CNTRL 0x00
> -#define TSL258X_ALS_TIME 0X01
> -#define TSL258X_INTERRUPT 0x02
> -#define TSL258X_GAIN 0x07
> -#define TSL258X_REVID 0x11
> -#define TSL258X_CHIPID 0x12
> -#define TSL258X_ALS_CHAN0LO 0x14
> -#define TSL258X_ALS_CHAN0HI 0x15
> -#define TSL258X_ALS_CHAN1LO 0x16
> -#define TSL258X_ALS_CHAN1HI 0x17
> -#define TSL258X_TMR_LO 0x18
> -#define TSL258X_TMR_HI 0x19
> +#define TSL2583_CNTRL 0x00
> +#define TSL2583_ALS_TIME 0X01
> +#define TSL2583_INTERRUPT 0x02
> +#define TSL2583_GAIN 0x07
> +#define TSL2583_REVID 0x11
> +#define TSL2583_CHIPID 0x12
> +#define TSL2583_ALS_CHAN0LO 0x14
> +#define TSL2583_ALS_CHAN0HI 0x15
> +#define TSL2583_ALS_CHAN1LO 0x16
> +#define TSL2583_ALS_CHAN1HI 0x17
> +#define TSL2583_TMR_LO 0x18
> +#define TSL2583_TMR_HI 0x19
>
> /* tsl2583 cmd reg masks */
> -#define TSL258X_CMD_REG 0x80
> -#define TSL258X_CMD_SPL_FN 0x60
> -#define TSL258X_CMD_ALS_INT_CLR 0X01
> +#define TSL2583_CMD_REG 0x80
> +#define TSL2583_CMD_SPL_FN 0x60
> +#define TSL2583_CMD_ALS_INT_CLR 0X01
>
> /* tsl2583 cntrl reg masks */
> -#define TSL258X_CNTL_ADC_ENBL 0x02
> -#define TSL258X_CNTL_PWR_OFF 0x00
> -#define TSL258X_CNTL_PWR_ON 0x01
> +#define TSL2583_CNTL_ADC_ENBL 0x02
> +#define TSL2583_CNTL_PWR_OFF 0x00
> +#define TSL2583_CNTL_PWR_ON 0x01
>
> /* tsl2583 status reg masks */
> -#define TSL258X_STA_ADC_VALID 0x01
> -#define TSL258X_STA_ADC_INTR 0x10
> +#define TSL2583_STA_ADC_VALID 0x01
> +#define TSL2583_STA_ADC_INTR 0x10
>
> /* Lux calculation constants */
> -#define TSL258X_LUX_CALC_OVER_FLOW 65535
> +#define TSL2583_LUX_CALC_OVER_FLOW 65535
>
> #define TSL2583_INTERRUPT_DISABLED 0x00
>
> @@ -64,13 +64,13 @@
> #define TSL2583_CHIP_ID_MASK 0xf0
>
> /* Per-device data */
> -struct taos_als_info {
> +struct tsl2583_als_info {
> u16 als_ch0;
> u16 als_ch1;
> u16 lux;
> };
>
> -struct taos_settings {
> +struct tsl2583_settings {
> int als_time;
> int als_gain;
> int als_gain_trim;
> @@ -80,14 +80,14 @@ struct taos_settings {
> struct tsl2583_chip {
> struct mutex als_mutex;
> struct i2c_client *client;
> - struct taos_als_info als_cur_info;
> - struct taos_settings taos_settings;
> + struct tsl2583_als_info als_cur_info;
> + struct tsl2583_settings als_settings;
> int als_time_scale;
> int als_saturation;
> bool suspended;
> };
>
> -struct taos_lux {
> +struct tsl2583_lux {
> unsigned int ratio;
> unsigned int ch0;
> unsigned int ch1;
> @@ -96,7 +96,7 @@ struct taos_lux {
> /* This structure is intentionally large to accommodate updates via sysfs. */
> /* Sized to 11 = max 10 segments + 1 termination segment */
> /* Assumption is one and only one type of glass used */
> -static struct taos_lux taos_device_lux[11] = {
> +static struct tsl2583_lux tsl2583_device_lux[11] = {
> { 9830, 8520, 15729 },
> { 12452, 10807, 23344 },
> { 14746, 6383, 11705 },
> @@ -121,25 +121,25 @@ static const struct gainadj gainadj[] = {
> * Provides initial operational parameter defaults.
> * These defaults may be changed through the device's sysfs files.
> */
> -static void taos_defaults(struct tsl2583_chip *chip)
> +static void tsl2583_defaults(struct tsl2583_chip *chip)
> {
> /*
> * The integration time must be a multiple of 50ms and within the
> * range [50, 600] ms.
> */
> - chip->taos_settings.als_time = 100;
> + chip->als_settings.als_time = 100;
>
> /*
> * This is an index into the gainadj table. Assume clear glass as the
> * default.
> */
> - chip->taos_settings.als_gain = 0;
> + chip->als_settings.als_gain = 0;
>
> /* Default gain trim to account for aperture effects */
> - chip->taos_settings.als_gain_trim = 1000;
> + chip->als_settings.als_gain_trim = 1000;
>
> /* Known external ALS reading used for calibration */
> - chip->taos_settings.als_cal_target = 130;
> + chip->als_settings.als_cal_target = 130;
> }
>
> /*
> @@ -149,26 +149,26 @@ static void taos_defaults(struct tsl2583_chip *chip)
> * Time scale factor array values are adjusted based on the integration time.
> * The raw values are multiplied by a scale factor, and device gain is obtained
> * using gain index. Limit checks are done next, then the ratio of a multiple
> - * of ch1 value, to the ch0 value, is calculated. The array taos_device_lux[]
> + * of ch1 value, to the ch0 value, is calculated. The array tsl2583_device_lux[]
> * declared above is then scanned to find the first ratio value that is just
> * above the ratio we just calculated. The ch0 and ch1 multiplier constants in
> * the array are then used along with the time scale factor array values, to
> * calculate the lux.
> */
> -static int taos_get_lux(struct iio_dev *indio_dev)
> +static int tsl2583_get_lux(struct iio_dev *indio_dev)
> {
> u16 ch0, ch1; /* separated ch0/ch1 data from device */
> u32 lux; /* raw lux calculated from device data */
> u64 lux64;
> u32 ratio;
> u8 buf[5];
> - struct taos_lux *p;
> + struct tsl2583_lux *p;
> struct tsl2583_chip *chip = iio_priv(indio_dev);
> int i, ret;
> u32 ch0lux = 0;
> u32 ch1lux = 0;
>
> - ret = i2c_smbus_read_byte_data(chip->client, TSL258X_CMD_REG);
> + ret = i2c_smbus_read_byte_data(chip->client, TSL2583_CMD_REG);
> if (ret < 0) {
> dev_err(&chip->client->dev, "%s: failed to read CMD_REG register\n",
> __func__);
> @@ -176,7 +176,7 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> }
>
> /* is data new & valid */
> - if (!(ret & TSL258X_STA_ADC_INTR)) {
> + if (!(ret & TSL2583_STA_ADC_INTR)) {
> dev_err(&chip->client->dev, "%s: data not valid; returning last value\n",
> __func__);
> ret = chip->als_cur_info.lux; /* return LAST VALUE */
> @@ -184,7 +184,7 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> }
>
> for (i = 0; i < 4; i++) {
> - int reg = TSL258X_CMD_REG | (TSL258X_ALS_CHAN0LO + i);
> + int reg = TSL2583_CMD_REG | (TSL2583_ALS_CHAN0LO + i);
>
> ret = i2c_smbus_read_byte_data(chip->client, reg);
> if (ret < 0) {
> @@ -200,8 +200,8 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> * we use the bit anyway - don't forget 0x80 - this is a command
> */
> ret = i2c_smbus_write_byte(chip->client,
> - (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
> - TSL258X_CMD_ALS_INT_CLR));
> + (TSL2583_CMD_REG | TSL2583_CMD_SPL_FN |
> + TSL2583_CMD_ALS_INT_CLR));
>
> if (ret < 0) {
> dev_err(&chip->client->dev, "%s: failed to clear the interrupt bit\n",
> @@ -228,7 +228,7 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> /* calculate ratio */
> ratio = (ch1 << 15) / ch0;
> /* convert to unscaled lux using the pointer to the table */
> - for (p = (struct taos_lux *)taos_device_lux;
> + for (p = (struct tsl2583_lux *)tsl2583_device_lux;
> p->ratio != 0 && p->ratio < ratio; p++)
> ;
>
> @@ -236,11 +236,11 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> lux = 0;
> } else {
> ch0lux = ((ch0 * p->ch0) +
> - (gainadj[chip->taos_settings.als_gain].ch0 >> 1))
> - / gainadj[chip->taos_settings.als_gain].ch0;
> + (gainadj[chip->als_settings.als_gain].ch0 >> 1))
> + / gainadj[chip->als_settings.als_gain].ch0;
> ch1lux = ((ch1 * p->ch1) +
> - (gainadj[chip->taos_settings.als_gain].ch1 >> 1))
> - / gainadj[chip->taos_settings.als_gain].ch1;
> + (gainadj[chip->als_settings.als_gain].ch1 >> 1))
> + / gainadj[chip->als_settings.als_gain].ch1;
> lux = ch0lux - ch1lux;
> }
>
> @@ -261,7 +261,7 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> chip->als_time_scale;
>
> /* Adjust for active gain scale.
> - * The taos_device_lux tables above have a factor of 8192 built in,
> + * The tsl2583_device_lux tables above have a factor of 8192 built in,
> * so we need to shift right.
> * User-specified gain provides a multiplier.
> * Apply user-specified gain before shifting right to retain precision.
> @@ -269,13 +269,13 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> * Then go back to 32 bits before division to avoid using div_u64().
> */
> lux64 = lux;
> - lux64 = lux64 * chip->taos_settings.als_gain_trim;
> + lux64 = lux64 * chip->als_settings.als_gain_trim;
> lux64 >>= 13;
> lux = lux64;
> lux = (lux + 500) / 1000;
> - if (lux > TSL258X_LUX_CALC_OVER_FLOW) { /* check for overflow */
> + if (lux > TSL2583_LUX_CALC_OVER_FLOW) { /* check for overflow */
> return_max:
> - lux = TSL258X_LUX_CALC_OVER_FLOW;
> + lux = TSL2583_LUX_CALC_OVER_FLOW;
> }
>
> /* Update the structure with the latest VALID lux. */
> @@ -291,7 +291,7 @@ static int taos_get_lux(struct iio_dev *indio_dev)
> * to derive actual lux).
> * Return updated gain_trim value.
> */
> -static int taos_als_calibrate(struct iio_dev *indio_dev)
> +static int tsl2583_als_calibrate(struct iio_dev *indio_dev)
> {
> struct tsl2583_chip *chip = iio_priv(indio_dev);
> unsigned int gain_trim_val;
> @@ -299,7 +299,7 @@ static int taos_als_calibrate(struct iio_dev *indio_dev)
> int lux_val;
>
> ret = i2c_smbus_read_byte_data(chip->client,
> - TSL258X_CMD_REG | TSL258X_CNTRL);
> + TSL2583_CMD_REG | TSL2583_CNTRL);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> "%s: failed to read from the CNTRL register\n",
> @@ -307,26 +307,26 @@ static int taos_als_calibrate(struct iio_dev *indio_dev)
> return ret;
> }
>
> - if ((ret & (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON))
> - != (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) {
> + if ((ret & (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON))
> + != (TSL2583_CNTL_ADC_ENBL | TSL2583_CNTL_PWR_ON)) {
> dev_err(&chip->client->dev,
> "%s: Device is not powered on and/or ADC is not enabled\n",
> __func__);
> return -EINVAL;
> - } else if ((ret & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) {
> + } else if ((ret & TSL2583_STA_ADC_VALID) != TSL2583_STA_ADC_VALID) {
> dev_err(&chip->client->dev,
> "%s: The two ADC channels have not completed an integration cycle\n",
> __func__);
> return -ENODATA;
> }
> - lux_val = taos_get_lux(indio_dev);
> + lux_val = tsl2583_get_lux(indio_dev);
> if (lux_val < 0) {
> dev_err(&chip->client->dev, "%s: failed to get lux\n",
> __func__);
> return lux_val;
> }
> - gain_trim_val = (unsigned int)(((chip->taos_settings.als_cal_target)
> - * chip->taos_settings.als_gain_trim) / lux_val);
> + gain_trim_val = (unsigned int)(((chip->als_settings.als_cal_target)
> + * chip->als_settings.als_gain_trim) / lux_val);
>
> if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
> dev_err(&chip->client->dev,
> @@ -334,7 +334,7 @@ static int taos_als_calibrate(struct iio_dev *indio_dev)
> __func__, gain_trim_val);
> return -ENODATA;
> }
> - chip->taos_settings.als_gain_trim = (int)gain_trim_val;
> + chip->als_settings.als_gain_trim = (int)gain_trim_val;
>
> return (int)gain_trim_val;
> }
> @@ -345,7 +345,7 @@ static int tsl2583_set_als_time(struct tsl2583_chip *chip)
> u8 val;
>
> /* determine als integration register */
> - als_count = (chip->taos_settings.als_time * 100 + 135) / 270;
> + als_count = (chip->als_settings.als_time * 100 + 135) / 270;
> if (!als_count)
> als_count = 1; /* ensure at least one cycle */
>
> @@ -354,7 +354,7 @@ static int tsl2583_set_als_time(struct tsl2583_chip *chip)
>
> val = 256 - als_count;
> ret = i2c_smbus_write_byte_data(chip->client,
> - TSL258X_CMD_REG | TSL258X_ALS_TIME,
> + TSL2583_CMD_REG | TSL2583_ALS_TIME,
> val);
> if (ret < 0) {
> dev_err(&chip->client->dev, "%s: failed to set the als time to %d\n",
> @@ -373,14 +373,14 @@ static int tsl2583_set_als_gain(struct tsl2583_chip *chip)
> {
> int ret;
>
> - /* Set the gain based on taos_settings struct */
> + /* Set the gain based on als_settings struct */
> ret = i2c_smbus_write_byte_data(chip->client,
> - TSL258X_CMD_REG | TSL258X_GAIN,
> - chip->taos_settings.als_gain);
> + TSL2583_CMD_REG | TSL2583_GAIN,
> + chip->als_settings.als_gain);
> if (ret < 0)
> dev_err(&chip->client->dev,
> "%s: failed to set the gain to %d\n", __func__,
> - chip->taos_settings.als_gain);
> + chip->als_settings.als_gain);
>
> return ret;
> }
> @@ -390,7 +390,7 @@ static int tsl2583_set_power_state(struct tsl2583_chip *chip, u8 state)
> int ret;
>
> ret = i2c_smbus_write_byte_data(chip->client,
> - TSL258X_CMD_REG | TSL258X_CNTRL, state);
> + TSL2583_CMD_REG | TSL2583_CNTRL, state);
> if (ret < 0)
> dev_err(&chip->client->dev,
> "%s: failed to set the power state to %d\n", __func__,
> @@ -409,12 +409,12 @@ static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
> int ret;
>
> /* Power on the device; ADC off. */
> - ret = tsl2583_set_power_state(chip, TSL258X_CNTL_PWR_ON);
> + ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON);
> if (ret < 0)
> return ret;
>
> ret = i2c_smbus_write_byte_data(chip->client,
> - TSL258X_CMD_REG | TSL258X_INTERRUPT,
> + TSL2583_CMD_REG | TSL2583_INTERRUPT,
> TSL2583_INTERRUPT_DISABLED);
> if (ret < 0) {
> dev_err(&chip->client->dev,
> @@ -432,8 +432,8 @@ static int tsl2583_chip_init_and_power_on(struct iio_dev *indio_dev)
>
> usleep_range(3000, 3500);
>
> - ret = tsl2583_set_power_state(chip, TSL258X_CNTL_PWR_ON |
> - TSL258X_CNTL_ADC_ENBL);
> + ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_ON |
> + TSL2583_CNTL_ADC_ENBL);
> if (ret < 0)
> return ret;
>
> @@ -453,7 +453,7 @@ static ssize_t in_illuminance_input_target_show(struct device *dev,
> int ret;
>
> mutex_lock(&chip->als_mutex);
> - ret = sprintf(buf, "%d\n", chip->taos_settings.als_cal_target);
> + ret = sprintf(buf, "%d\n", chip->als_settings.als_cal_target);
> mutex_unlock(&chip->als_mutex);
>
> return ret;
> @@ -471,7 +471,7 @@ static ssize_t in_illuminance_input_target_store(struct device *dev,
> return -EINVAL;
>
> mutex_lock(&chip->als_mutex);
> - chip->taos_settings.als_cal_target = value;
> + chip->als_settings.als_cal_target = value;
> mutex_unlock(&chip->als_mutex);
>
> return len;
> @@ -495,7 +495,7 @@ static ssize_t in_illuminance_calibrate_store(struct device *dev,
> goto done;
> }
>
> - ret = taos_als_calibrate(indio_dev);
> + ret = tsl2583_als_calibrate(indio_dev);
> if (ret < 0)
> goto done;
>
> @@ -513,12 +513,12 @@ static ssize_t in_illuminance_lux_table_show(struct device *dev,
> int i;
> int offset = 0;
>
> - for (i = 0; i < ARRAY_SIZE(taos_device_lux); i++) {
> + for (i = 0; i < ARRAY_SIZE(tsl2583_device_lux); i++) {
> offset += sprintf(buf + offset, "%u,%u,%u,",
> - taos_device_lux[i].ratio,
> - taos_device_lux[i].ch0,
> - taos_device_lux[i].ch1);
> - if (taos_device_lux[i].ratio == 0) {
> + tsl2583_device_lux[i].ratio,
> + tsl2583_device_lux[i].ch0,
> + tsl2583_device_lux[i].ch1);
> + if (tsl2583_device_lux[i].ratio == 0) {
> /*
> * We just printed the first "0" entry.
> * Now get rid of the extra "," and break.
> @@ -532,7 +532,7 @@ static ssize_t in_illuminance_lux_table_show(struct device *dev,
> return offset;
> }
>
> -#define TSL2583_MAX_LUX_INTS ((ARRAY_SIZE(taos_device_lux) - 1) * 3)
> +#define TSL2583_MAX_LUX_INTS ((ARRAY_SIZE(tsl2583_device_lux) - 1) * 3)
>
> static ssize_t in_illuminance_lux_table_store(struct device *dev,
> struct device_attribute *attr,
> @@ -540,7 +540,7 @@ static ssize_t in_illuminance_lux_table_store(struct device *dev,
> {
> struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> struct tsl2583_chip *chip = iio_priv(indio_dev);
> - int value[ARRAY_SIZE(taos_device_lux) * 3 + 1];
> + int value[ARRAY_SIZE(tsl2583_device_lux) * 3 + 1];
> int n, ret = -EINVAL;
>
> mutex_lock(&chip->als_mutex);
> @@ -566,8 +566,8 @@ static ssize_t in_illuminance_lux_table_store(struct device *dev,
> }
>
> /* Zero out the table */
> - memset(taos_device_lux, 0, sizeof(taos_device_lux));
> - memcpy(taos_device_lux, &value[1], (value[0] * 4));
> + memset(tsl2583_device_lux, 0, sizeof(tsl2583_device_lux));
> + memcpy(tsl2583_device_lux, &value[1], (value[0] * 4));
>
> ret = len;
>
> @@ -636,7 +636,7 @@ static int tsl2583_read_raw(struct iio_dev *indio_dev,
> switch (mask) {
> case IIO_CHAN_INFO_RAW:
> if (chan->type == IIO_LIGHT) {
> - ret = taos_get_lux(indio_dev);
> + ret = tsl2583_get_lux(indio_dev);
> if (ret < 0)
> goto read_done;
>
> @@ -659,7 +659,7 @@ static int tsl2583_read_raw(struct iio_dev *indio_dev,
> break;
> case IIO_CHAN_INFO_PROCESSED:
> if (chan->type == IIO_LIGHT) {
> - ret = taos_get_lux(indio_dev);
> + ret = tsl2583_get_lux(indio_dev);
> if (ret < 0)
> goto read_done;
>
> @@ -669,20 +669,20 @@ static int tsl2583_read_raw(struct iio_dev *indio_dev,
> break;
> case IIO_CHAN_INFO_CALIBBIAS:
> if (chan->type == IIO_LIGHT) {
> - *val = chip->taos_settings.als_gain_trim;
> + *val = chip->als_settings.als_gain_trim;
> ret = IIO_VAL_INT;
> }
> break;
> case IIO_CHAN_INFO_CALIBSCALE:
> if (chan->type == IIO_LIGHT) {
> - *val = gainadj[chip->taos_settings.als_gain].mean;
> + *val = gainadj[chip->als_settings.als_gain].mean;
> ret = IIO_VAL_INT;
> }
> break;
> case IIO_CHAN_INFO_INT_TIME:
> if (chan->type == IIO_LIGHT) {
> *val = 0;
> - *val2 = chip->taos_settings.als_time;
> + *val2 = chip->als_settings.als_time;
> ret = IIO_VAL_INT_PLUS_MICRO;
> }
> break;
> @@ -713,7 +713,7 @@ static int tsl2583_write_raw(struct iio_dev *indio_dev,
> switch (mask) {
> case IIO_CHAN_INFO_CALIBBIAS:
> if (chan->type == IIO_LIGHT) {
> - chip->taos_settings.als_gain_trim = val;
> + chip->als_settings.als_gain_trim = val;
> ret = 0;
> }
> break;
> @@ -723,7 +723,7 @@ static int tsl2583_write_raw(struct iio_dev *indio_dev,
>
> for (i = 0; i < ARRAY_SIZE(gainadj); i++) {
> if (gainadj[i].mean == val) {
> - chip->taos_settings.als_gain = i;
> + chip->als_settings.als_gain = i;
> ret = tsl2583_set_als_gain(chip);
> break;
> }
> @@ -733,7 +733,7 @@ static int tsl2583_write_raw(struct iio_dev *indio_dev,
> case IIO_CHAN_INFO_INT_TIME:
> if (chan->type == IIO_LIGHT && !val && val2 >= 50 &&
> val2 <= 650 && !(val2 % 50)) {
> - chip->taos_settings.als_time = val2;
> + chip->als_settings.als_time = val2;
> ret = tsl2583_set_als_time(chip);
> }
> break;
> @@ -758,8 +758,8 @@ static const struct iio_info tsl2583_info = {
> * Client probe function - When a valid device is found, the driver's device
> * data structure is updated, and initialization completes successfully.
> */
> -static int taos_probe(struct i2c_client *clientp,
> - const struct i2c_device_id *idp)
> +static int tsl2583_probe(struct i2c_client *clientp,
> + const struct i2c_device_id *idp)
> {
> int ret;
> struct tsl2583_chip *chip;
> @@ -783,7 +783,7 @@ static int taos_probe(struct i2c_client *clientp,
> chip->suspended = true;
>
> ret = i2c_smbus_read_byte_data(clientp,
> - TSL258X_CMD_REG | TSL258X_CHIPID);
> + TSL2583_CMD_REG | TSL2583_CHIPID);
> if (ret < 0) {
> dev_err(&clientp->dev,
> "%s: failed to read the chip ID register\n", __func__);
> @@ -810,7 +810,7 @@ static int taos_probe(struct i2c_client *clientp,
> }
>
> /* Load up the V2 defaults (these are hard coded defaults for now) */
> - taos_defaults(chip);
> + tsl2583_defaults(chip);
>
> /* Make sure the chip is on */
> ret = tsl2583_chip_init_and_power_on(indio_dev);
> @@ -821,7 +821,7 @@ static int taos_probe(struct i2c_client *clientp,
> return 0;
> }
>
> -static int __maybe_unused taos_suspend(struct device *dev)
> +static int __maybe_unused tsl2583_suspend(struct device *dev)
> {
> struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> struct tsl2583_chip *chip = iio_priv(indio_dev);
> @@ -829,14 +829,14 @@ static int __maybe_unused taos_suspend(struct device *dev)
>
> mutex_lock(&chip->als_mutex);
>
> - ret = tsl2583_set_power_state(chip, TSL258X_CNTL_PWR_OFF);
> + ret = tsl2583_set_power_state(chip, TSL2583_CNTL_PWR_OFF);
> chip->suspended = true;
>
> mutex_unlock(&chip->als_mutex);
> return ret;
> }
>
> -static int __maybe_unused taos_resume(struct device *dev)
> +static int __maybe_unused tsl2583_resume(struct device *dev)
> {
> struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> struct tsl2583_chip *chip = iio_priv(indio_dev);
> @@ -850,35 +850,35 @@ static int __maybe_unused taos_resume(struct device *dev)
> return ret;
> }
>
> -static SIMPLE_DEV_PM_OPS(taos_pm_ops, taos_suspend, taos_resume);
> +static SIMPLE_DEV_PM_OPS(tsl2583_pm_ops, tsl2583_suspend, tsl2583_resume);
>
> -static struct i2c_device_id taos_idtable[] = {
> +static struct i2c_device_id tsl2583_idtable[] = {
> { "tsl2580", 0 },
> { "tsl2581", 1 },
> { "tsl2583", 2 },
> {}
> };
> -MODULE_DEVICE_TABLE(i2c, taos_idtable);
> +MODULE_DEVICE_TABLE(i2c, tsl2583_idtable);
>
> -static const struct of_device_id taos2583_of_match[] = {
> +static const struct of_device_id tsl2583_of_match[] = {
> { .compatible = "amstaos,tsl2580", },
> { .compatible = "amstaos,tsl2581", },
> { .compatible = "amstaos,tsl2583", },
> { },
> };
> -MODULE_DEVICE_TABLE(of, taos2583_of_match);
> +MODULE_DEVICE_TABLE(of, tsl2583_of_match);
>
> /* Driver definition */
> -static struct i2c_driver taos_driver = {
> +static struct i2c_driver tsl2583_driver = {
> .driver = {
> .name = "tsl2583",
> - .pm = &taos_pm_ops,
> - .of_match_table = taos2583_of_match,
> + .pm = &tsl2583_pm_ops,
> + .of_match_table = tsl2583_of_match,
> },
> - .id_table = taos_idtable,
> - .probe = taos_probe,
> + .id_table = tsl2583_idtable,
> + .probe = tsl2583_probe,
> };
> -module_i2c_driver(taos_driver);
> +module_i2c_driver(tsl2583_driver);
>
> MODULE_AUTHOR("J. August Brenner<jbrenner@taosinc.com>");
> MODULE_DESCRIPTION("TAOS tsl2583 ambient light sensor driver");
>

\
 
 \ /
  Last update: 2016-11-13 13:09    [W:0.929 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site