lkml.org 
[lkml]   [2016]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/6] mfd: stm32-adc: Add support for stm32 ADC
From
Date
On 10/11/16 16:18, Fabrice Gasnier wrote:
> Add core driver for STMicroelectronics STM32 ADC (Analog to Digital
> Converter). STM32 ADC can be composed of up to 3 ADCs with shared
> resources like clock prescaler, common interrupt line and analog
> reference voltage.
> This core driver basically manages shared resources.
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Looks good to me (other than the build issue obviously ;)

The fun bit will be trying to keep the whole thing this clean as you
add the more 'interesting' functionality. *fingers crossed*

Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
> drivers/mfd/Kconfig | 14 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/stm32-adc-core.c | 301 +++++++++++++++++++++++++++++++++++++
> include/linux/mfd/stm32-adc-core.h | 52 +++++++
> 4 files changed, 368 insertions(+)
> create mode 100644 drivers/mfd/stm32-adc-core.c
> create mode 100644 include/linux/mfd/stm32-adc-core.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index c6df644..2580cee 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1152,6 +1152,20 @@ config MFD_PALMAS
> If you say yes here you get support for the Palmas
> series of PMIC chips from Texas Instruments.
>
> +config MFD_STM32_ADC
> + tristate "STMicroelectronics STM32 adc"
> + depends on ARCH_STM32 || COMPILE_TEST
> + depends on OF
> + select MFD_CORE
> + select REGULATOR
> + select REGULATOR_FIXED_VOLTAGE
> + help
> + Select this option to enable the core driver for STMicroelectronics
> + STM32 analog-to-digital converter (ADC).
> +
> + This driver can also be built as a module. If so, the module
> + will be called stm32-adc-core.
> +
> config TPS6105X
> tristate "TI TPS61050/61052 Boost Converters"
> depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 9834e66..4571506 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -185,6 +185,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
> obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
> obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> obj-$(CONFIG_MFD_PALMAS) += palmas.o
> +obj-$(CONFIG_MFD_STM32_ADC) += stm32-adc-core.o
> obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> obj-$(CONFIG_MFD_RK808) += rk808.o
> diff --git a/drivers/mfd/stm32-adc-core.c b/drivers/mfd/stm32-adc-core.c
> new file mode 100644
> index 0000000..bcf52fb
> --- /dev/null
> +++ b/drivers/mfd/stm32-adc-core.c
> @@ -0,0 +1,301 @@
> +/*
> + * This file is part of STM32 ADC driver
> + *
> + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
> + * Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
> + *
> + * Inspired from: fsl-imx25-tsadc
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdesc.h>
> +#include <linux/irqdomain.h>
> +#include <linux/mfd/stm32-adc-core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +
> +/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
> +#define STM32F4_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
> +#define STM32F4_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x04)
> +
> +/* STM32F4_ADC_CSR - bit fields */
> +#define STM32F4_EOC3 BIT(17)
> +#define STM32F4_EOC2 BIT(9)
> +#define STM32F4_EOC1 BIT(1)
> +
> +/* STM32F4_ADC_CCR - bit fields */
> +#define STM32F4_ADC_ADCPRE_SHIFT 16
> +#define STM32F4_ADC_ADCPRE_MASK GENMASK(17, 16)
> +
> +/* STM32 F4 maximum analog clock rate (from datasheet) */
> +#define STM32F4_ADC_MAX_CLK_RATE 36000000
> +
> +/**
> + * struct stm32_adc_priv - stm32 ADC core private data
> + * @irq: irq for ADC block
> + * @domain: irq domain reference
> + * @aclk: clock reference for the analog circuitry
> + * @vref: regulator reference
> + * @common: common data for all ADC instances
> + */
> +struct stm32_adc_priv {
> + int irq;
> + struct irq_domain *domain;
> + struct clk *aclk;
> + struct regulator *vref;
> + struct stm32_adc_common common;
> +};
> +
> +static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
> +{
> + return container_of(com, struct stm32_adc_priv, common);
> +}
> +
> +/* STM32F4 ADC internal common clock prescaler division ratios */
> +static int stm32f4_pclk_div[] = {2, 4, 6, 8};
> +
> +/**
> + * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
> + * @priv: stm32 ADC core private data
> + * Select clock prescaler used for analog conversions, before using ADC.
> + */
> +static int stm32f4_adc_clk_sel(struct platform_device *pdev,
> + struct stm32_adc_priv *priv)
> +{
> + unsigned long rate;
> + u32 val;
> + int i;
> +
> + rate = clk_get_rate(priv->aclk);
> + for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
> + if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
> + break;
> + }
> + if (i >= ARRAY_SIZE(stm32f4_pclk_div))
> + return -EINVAL;
> +
> + val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
> + val &= ~STM32F4_ADC_ADCPRE_MASK;
> + val |= i << STM32F4_ADC_ADCPRE_SHIFT;
> + writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
> +
> + dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
> + rate / (stm32f4_pclk_div[i] * 1000));
> +
> + return 0;
> +}
> +
> +/* ADC common interrupt for all instances */
> +static void stm32_adc_irq_handler(struct irq_desc *desc)
> +{
> + struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + u32 status;
> +
> + chained_irq_enter(chip, desc);
> + status = readl_relaxed(priv->common.base + STM32F4_ADC_CSR);
> +
> + if (status & STM32F4_EOC1)
> + generic_handle_irq(irq_find_mapping(priv->domain, 0));
> +
> + if (status & STM32F4_EOC2)
> + generic_handle_irq(irq_find_mapping(priv->domain, 1));
> +
> + if (status & STM32F4_EOC3)
> + generic_handle_irq(irq_find_mapping(priv->domain, 2));
> +
> + chained_irq_exit(chip, desc);
> +};
> +
> +static int stm32_adc_domain_map(struct irq_domain *d, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_chip_data(irq, d->host_data);
> + irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_level_irq);
> +
> + return 0;
> +}
> +
> +static void stm32_adc_domain_unmap(struct irq_domain *d, unsigned int irq)
> +{
> + irq_set_chip_and_handler(irq, NULL, NULL);
> + irq_set_chip_data(irq, NULL);
> +}
> +
> +static const struct irq_domain_ops stm32_adc_domain_ops = {
> + .map = stm32_adc_domain_map,
> + .unmap = stm32_adc_domain_unmap,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static int stm32_adc_irq_probe(struct platform_device *pdev,
> + struct stm32_adc_priv *priv)
> +{
> + struct device_node *np = pdev->dev.of_node;
> +
> + priv->irq = platform_get_irq(pdev, 0);
> + if (priv->irq < 0) {
> + dev_err(&pdev->dev, "failed to get irq\n");
> + return priv->irq;
> + }
> +
> + priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
> + &stm32_adc_domain_ops,
> + priv);
> + if (!priv->domain) {
> + dev_err(&pdev->dev, "Failed to add irq domain\n");
> + return -ENOMEM;
> + }
> +
> + irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
> + irq_set_handler_data(priv->irq, priv);
> +
> + return 0;
> +}
> +
> +static void stm32_adc_irq_remove(struct platform_device *pdev,
> + struct stm32_adc_priv *priv)
> +{
> + int hwirq;
> +
> + for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
> + irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
> + irq_domain_remove(priv->domain);
> + irq_set_chained_handler(priv->irq, NULL);
> +}
> +
> +static int stm32_adc_probe(struct platform_device *pdev)
> +{
> + struct stm32_adc_priv *priv;
> + struct device_node *np = pdev->dev.of_node;
> + struct resource *res;
> + int ret;
> +
> + if (!pdev->dev.of_node)
> + return -ENODEV;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->common.base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->common.base))
> + return PTR_ERR(priv->common.base);
> +
> + priv->vref = devm_regulator_get(&pdev->dev, "vref");
> + if (IS_ERR(priv->vref)) {
> + ret = PTR_ERR(priv->vref);
> + dev_err(&pdev->dev, "vref get failed, %d\n", ret);
> + return ret;
> + }
> +
> + ret = regulator_enable(priv->vref);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "vref enable failed\n");
> + return ret;
> + }
> +
> + ret = regulator_get_voltage(priv->vref);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
> + goto err_regulator_disable;
> + }
> + priv->common.vref_mv = ret / 1000;
> + dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
> +
> + priv->aclk = devm_clk_get(&pdev->dev, "adc");
> + if (IS_ERR(priv->aclk)) {
> + ret = PTR_ERR(priv->aclk);
> + dev_err(&pdev->dev, "Can't get 'adc' clock\n");
> + goto err_regulator_disable;
> + }
> +
> + ret = clk_prepare_enable(priv->aclk);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "adc clk enable failed\n");
> + goto err_regulator_disable;
> + }
> +
> + ret = stm32f4_adc_clk_sel(pdev, priv);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "adc clk selection failed\n");
> + goto err_clk_disable;
> + }
> +
> + ret = stm32_adc_irq_probe(pdev, priv);
> + if (ret < 0)
> + goto err_clk_disable;
> +
> + platform_set_drvdata(pdev, &priv->common);
> +
> + ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to populate DT children\n");
> + goto err_irq_remove;
> + }
> +
> + return 0;
> +
> +err_irq_remove:
> + stm32_adc_irq_remove(pdev, priv);
> +
> +err_clk_disable:
> + clk_disable_unprepare(priv->aclk);
> +
> +err_regulator_disable:
> + regulator_disable(priv->vref);
> +
> + return ret;
> +}
> +
> +static int stm32_adc_remove(struct platform_device *pdev)
> +{
> + struct stm32_adc_common *common = platform_get_drvdata(pdev);
> + struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
> +
> + of_platform_depopulate(&pdev->dev);
> + stm32_adc_irq_remove(pdev, priv);
> + clk_disable_unprepare(priv->aclk);
> + regulator_disable(priv->vref);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id stm32_adc_of_match[] = {
> + { .compatible = "st,stm32f4-adc-core" },
> +};
> +MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
> +
> +static struct platform_driver stm32_adc_driver = {
> + .probe = stm32_adc_probe,
> + .remove = stm32_adc_remove,
> + .driver = {
> + .name = "stm32-adc-core",
> + .of_match_table = stm32_adc_of_match,
> + },
> +};
> +module_platform_driver(stm32_adc_driver);
> +
> +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 ADC MFD driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:stm32-adc-core");
> diff --git a/include/linux/mfd/stm32-adc-core.h b/include/linux/mfd/stm32-adc-core.h
> new file mode 100644
> index 0000000..081fa5f
> --- /dev/null
> +++ b/include/linux/mfd/stm32-adc-core.h
> @@ -0,0 +1,52 @@
> +/*
> + * This file is part of STM32 ADC driver
> + *
> + * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
> + * Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
> + *
> + * License type: GPLv2
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE.
> + * See the GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __STM32_ADC_H
> +#define __STM32_ADC_H
> +
> +/*
> + * STM32 - ADC global register map
> + * ________________________________________________________
> + * | Offset | Register |
> + * --------------------------------------------------------
> + * | 0x000 | Master ADC1 |
> + * --------------------------------------------------------
> + * | 0x100 | Slave ADC2 |
> + * --------------------------------------------------------
> + * | 0x200 | Slave ADC3 |
> + * --------------------------------------------------------
> + * | 0x300 | Master & Slave common regs |
> + * --------------------------------------------------------
> + */
> +#define STM32_ADC_MAX_ADCS 3
> +#define STM32_ADCX_COMN_OFFSET 0x300
> +
> +/**
> + * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
> + * @base: control registers base cpu addr
> + * @vref_mv: vref voltage (mv)
> + */
> +struct stm32_adc_common {
> + void __iomem *base;
> + int vref_mv;
> +};
> +
> +#endif
>

\
 
 \ /
  Last update: 2016-11-12 18:09    [W:0.148 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site