lkml.org 
[lkml]   [2016]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 8/8] clocksource: import ARC timer driver
From
Date
On 11/11/2016 03:11 PM, Daniel Lezcano wrote:
> On Fri, Nov 11, 2016 at 01:38:52PM -0800, Vineet Gupta wrote:
>> This adds support for
>>
>> - CONFIG_ARC_TIMERS : legacy 32-bit TIMER0 and TIMER1 which count UP
>> from @CNT to @LIMIT, before optionally triggering an interrupt.
>> These are programmed using ARC auxiliary register interface.
>> These are present in all ARC cores (ARC700 and ARC HS38)
>> TIMER0 serves as clockevent for all ARC linux builds.
>> TIMER1 is used for clocksource in arc700 builds.
>>
>> - CONFIG_ARC_TIMERS_64BIT: 64-bit counters, RTC and GFRC found in
>> ARC HS38 cores. These are independnet IP blocks with different
>> programming model respectively.
>>
>> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
>> ---
>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
>


Thx Daniel. So I suppose for 4.10, I will get these merged, including the
driver/clocksource bits. OK ?

-Vineet

\
 
 \ /
  Last update: 2016-11-12 01:54    [W:0.070 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site