lkml.org 
[lkml]   [2016]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06
From
Date
Hi, Arnd,

On 2016/11/11 0:07, Arnd Bergmann wrote:
> On Thursday, November 10, 2016 3:36:49 PM CET Gabriele Paoloni wrote:
>>
>> Where should we get the range from? For LPC we know that it is going
>> Work on anything that is not used by PCI I/O space, and this is
>> why we use [0, PCIBIOS_MIN_IO]
>
> It should be allocated the same way we allocate PCI config space
> segments. This is currently done with the io_range list in
> drivers/pci/pci.c, which isn't perfect but could be extended
> if necessary. Based on what others commented here, I'd rather
> make the differences between ISA/LPC and PCI I/O ranges smaller
> than larger.
>
>>> Your current version has
>>>
>>> if (arm64_extio_ops->pfout) \
>>> arm64_extio_ops->pfout(arm64_extio_ops->devpara,\
>>> addr, value, sizeof(type)); \
>>>
>>> Instead, just subtract the start of the range from the logical
>>> port number to transform it back into a bus-local port number:
>>
>> These accessors do not operate on IO tokens:
>>
>> If (arm64_extio_ops->start > addr || arm64_extio_ops->end < addr)
>> addr is not going to be an I/O token; in fact patch 2/3 imposes that
>> the I/O tokens will start at PCIBIOS_MIN_IO. So from 0 to PCIBIOS_MIN_IO
>> we have free physical addresses that the accessors can operate on.
>
> Ah, I missed that part. I'd rather not use PCIBIOS_MIN_IO to refer to
> the logical I/O tokens, the purpose of that macro is really meant
> for allocating PCI I/O port numbers within the address space of
> one bus.
>
> Note that it's equally likely that whichever next platform needs
> non-mapped I/O access like this actually needs them for PCI I/O space,
> and that will use it on addresses registered to a PCI host bridge.
>
> If we separate the two steps:
>
> a) assign a range of logical I/O port numbers to a bus
> b) register a set of helpers for redirecting logical I/O
> port to a helper function
>
It seems that we need to add a new bus and the corresponding resource management
which can also cover current PCI pio mapping, is it right?

Thanks,
Zhichang

> then I think the code will get cleaner and more flexible.
> It should actually then be able to replace the powerpc
> specific implementation.
>
> Arnd
>
> .
>

\
 
 \ /
  Last update: 2016-11-11 11:10    [W:0.347 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site