lkml.org 
[lkml]   [2016]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: Device or HBA level QD throttling creates randomness in sequetial workload
Jens- Replied inline.


Omar - I tested your WIP repo and figure out System hangs only if I pass "
scsi_mod.use_blk_mq=Y". Without this, your WIP branch works fine, but I am
looking for scsi_mod.use_blk_mq=Y.

Also below is snippet of blktrace. In case of higher per device QD, I see
Requeue request in blktrace.

65,128 10 6268 2.432404509 18594 P N [fio]
65,128 10 6269 2.432405013 18594 U N [fio] 1
65,128 10 6270 2.432405143 18594 I WS 148800 + 8 [fio]
65,128 10 6271 2.432405740 18594 R WS 148800 + 8 [0]
65,128 10 6272 2.432409794 18594 Q WS 148808 + 8 [fio]
65,128 10 6273 2.432410234 18594 G WS 148808 + 8 [fio]
65,128 10 6274 2.432410424 18594 S WS 148808 + 8 [fio]
65,128 23 3626 2.432432595 16232 D WS 148800 + 8 [kworker/23:1H]
65,128 22 3279 2.432973482 0 C WS 147432 + 8 [0]
65,128 7 6126 2.433032637 18594 P N [fio]
65,128 7 6127 2.433033204 18594 U N [fio] 1
65,128 7 6128 2.433033346 18594 I WS 148808 + 8 [fio]
65,128 7 6129 2.433033871 18594 D WS 148808 + 8 [fio]
65,128 7 6130 2.433034559 18594 R WS 148808 + 8 [0]
65,128 7 6131 2.433039796 18594 Q WS 148816 + 8 [fio]
65,128 7 6132 2.433040206 18594 G WS 148816 + 8 [fio]
65,128 7 6133 2.433040351 18594 S WS 148816 + 8 [fio]
65,128 9 6392 2.433133729 0 C WS 147240 + 8 [0]
65,128 9 6393 2.433138166 905 D WS 148808 + 8 [kworker/9:1H]
65,128 7 6134 2.433167450 18594 P N [fio]
65,128 7 6135 2.433167911 18594 U N [fio] 1
65,128 7 6136 2.433168074 18594 I WS 148816 + 8 [fio]
65,128 7 6137 2.433168492 18594 D WS 148816 + 8 [fio]
65,128 7 6138 2.433174016 18594 Q WS 148824 + 8 [fio]
65,128 7 6139 2.433174282 18594 G WS 148824 + 8 [fio]
65,128 7 6140 2.433174613 18594 S WS 148824 + 8 [fio]
CPU0 (sdy):
Reads Queued: 0, 0KiB Writes Queued: 79,
316KiB
Read Dispatches: 0, 0KiB Write Dispatches: 67,
18,446,744,073PiB
Reads Requeued: 0 Writes Requeued: 86
Reads Completed: 0, 0KiB Writes Completed: 98,
392KiB
Read Merges: 0, 0KiB Write Merges: 0,
0KiB
Read depth: 0 Write depth: 5
IO unplugs: 79 Timer unplugs: 0



` Kashyap

> -----Original Message-----
> From: Jens Axboe [mailto:axboe@kernel.dk]
> Sent: Monday, October 31, 2016 10:54 PM
> To: Kashyap Desai; Omar Sandoval
> Cc: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org; linux-
> block@vger.kernel.org; Christoph Hellwig; paolo.valente@linaro.org
> Subject: Re: Device or HBA level QD throttling creates randomness in
> sequetial
> workload
>
> Hi,
>
> One guess would be that this isn't around a requeue condition, but rather
> the
> fact that we don't really guarantee any sort of hard FIFO behavior between
> the
> software queues. Can you try this test patch to see if it changes the
> behavior for
> you? Warning: untested...

Jens - I tested the patch, but I still see random IO pattern for expected
Sequential Run. I am intentionally running case of Re-queue and seeing
issue at the time of Re-queue.
If there is no Requeue, I see no issue at LLD.


>
> diff --git a/block/blk-mq.c b/block/blk-mq.c index
> f3d27a6dee09..5404ca9c71b2
> 100644
> --- a/block/blk-mq.c
> +++ b/block/blk-mq.c
> @@ -772,6 +772,14 @@ static inline unsigned int queued_to_index(unsigned
> int
> queued)
> return min(BLK_MQ_MAX_DISPATCH_ORDER - 1, ilog2(queued) + 1);
> }
>
> +static int rq_pos_cmp(void *priv, struct list_head *a, struct list_head
> +*b) {
> + struct request *rqa = container_of(a, struct request, queuelist);
> + struct request *rqb = container_of(b, struct request, queuelist);
> +
> + return blk_rq_pos(rqa) < blk_rq_pos(rqb); }
> +
> /*
> * Run this hardware queue, pulling any software queues mapped to it in.
> * Note that this function currently has various problems around
> ordering @@ -
> 812,6 +820,14 @@ static void __blk_mq_run_hw_queue(struct blk_mq_hw_ctx
> *hctx)
> }
>
> /*
> + * If the device is rotational, sort the list sanely to avoid
> + * unecessary seeks. The software queues are roughly FIFO, but
> + * only roughly, there are no hard guarantees.
> + */
> + if (!blk_queue_nonrot(q))
> + list_sort(NULL, &rq_list, rq_pos_cmp);
> +
> + /*
> * Start off with dptr being NULL, so we start the first request
> * immediately, even if we have more pending.
> */
>
> --
> Jens Axboe

\
 
 \ /
  Last update: 2016-11-01 06:41    [W:0.093 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site