lkml.org 
[lkml]   [2016]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v6 3/3] pci:add support aer/pme interrupts with none MSI/MSI-X/INTx mode
Date
Hi Rob,

Best regards,
Liu Po

> -----Original Message-----
> From: Rob Herring [mailto:robh@kernel.org]
> Sent: Sunday, October 09, 2016 4:50 AM
> To: Po Liu
> Cc: linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; Bjorn Helgaas;
> Shawn Guo; Marc Zyngier; Roy Zang; Mingkai Hu; Stuart Yoder; Leo Li;
> Arnd Bergmann; M.H. Lian; Murali Karicheri
> Subject: Re: [PATCH v6 3/3] pci:add support aer/pme interrupts with none
> MSI/MSI-X/INTx mode
>
> On Fri, Sep 30, 2016 at 05:11:37PM +0800, Po Liu wrote:
> > On some platforms, root port doesn't support MSI/MSI-X/INTx in RC mode.
> > When chip support the aer/pme interrupts with none MSI/MSI-X/INTx
> > mode, maybe there is interrupt line for aer pme etc. Search the
> > interrupt number in the fdt file. Then fixup the dev->irq with it.
>
> Again, explain why you are breaking compatibility. Will an old dtb using
> "intr" still work with this change? It should normally. There are some
> exceptions, but you need to say what they are.
>
Ok, understand.

> >
> > Signed-off-by: Po Liu <po.liu@nxp.com>
> > ---
> > changes for v6:
> > - modify bindings for "aer""pme";
> > - changing to the hood method to implement the aer pme interrupt;
> > - add pme interrupt in the same way;
> >
> > .../devicetree/bindings/pci/layerscape-pci.txt | 13 +++++--
> > arch/arm/kernel/bios32.c | 43
> ++++++++++++++++++++++
> > arch/arm64/kernel/pci.c | 43
> ++++++++++++++++++++++
> > drivers/pci/pcie/portdrv_core.c | 31
> +++++++++++++++-
> > include/linux/pci.h | 1 +
> > 5 files changed, 126 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > index 41e9f55..51ed49e 100644
> > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > @@ -18,8 +18,12 @@ Required properties:
> > - reg: base addresses and lengths of the PCIe controller
> > - interrupts: A list of interrupt outputs of the controller. Must
> contain an
> > entry for each entry in the interrupt-names property.
> > -- interrupt-names: Must include the following entries:
> > - "intr": The interrupt that is asserted for controller interrupts
> > +- interrupt-names: It could include the following entries:
>
> "Could" is not strong enough. Every valid combination of interrupts
> should correspond to a specific compatible string. A given version of
> h/w either has these interrupts or not.

Ok, will change to 'must'.

>
> > + "aer": Asserted for aer interrupt when chip support the aer
> interrupt with
> > + none MSI/MSI-X/INTx mode,but there is interrupt line for
> aer.
> > + "pme": Asserted for pme interrupt when chip support the pme
> interrupt with
> > + none MSI/MSI-X/INTx mode,but there is interrupt line for
> pme.
> > + ......
> > - fsl,pcie-scfg: Must include two entries.
> > The first entry must be a link to the SCFG device node
> > The second entry must be '0' or '1' based on physical PCIe
> controller index.
\
 
 \ /
  Last update: 2016-10-09 04:48    [W:0.110 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site