lkml.org 
[lkml]   [2016]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/4] tmp/tpm_crb: fix Intel PTT hw bug during idle state
Date
> 
> On Sat, Oct 08, 2016 at 02:59:37PM +0300, Tomas Winkler wrote:
> > From: "Winkler, Tomas" <tomas.winkler@intel.com>
> >
> > There is a HW bug in Skylake, Kabylake, and Broxton PCH Intel PTT
> > device, where most of the registers in the control area except START,
> > REQUEST, CANCEL, and LOC_CTRL lost retention when the device is in the
> idle state.
> > Hence we need to bring the device to ready state before accessing the
> > other registers. The fix brings device to ready state before trying to
> > read command and response buffer addresses in order to remap the for
> access.
> >
> > Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> > ---
> > V2: cmd read need to be called also before crb_init as this will run
> > self test.
> > V3: resend.
> > V4: add Kabylake to the list of effected platforms
> >
> > drivers/char/tpm/tpm_crb.c | 47
> > ++++++++++++++++++++++++++++++++++++++--------
> > 1 file changed, 39 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> > index 0f3b3f3d12d3..4eb96b85c653 100644
> > --- a/drivers/char/tpm/tpm_crb.c
> > +++ b/drivers/char/tpm/tpm_crb.c
> > @@ -319,6 +319,7 @@ static int crb_map_io(struct acpi_device *device,
> struct crb_priv *priv,
> > struct list_head resources;
> > struct resource io_res;
> > struct device *dev = &device->dev;
> > + u32 pa_high, pa_low;
> > u64 cmd_pa;
> > u32 cmd_size;
> > u64 rsp_pa;
> > @@ -346,12 +347,27 @@ static int crb_map_io(struct acpi_device *device,
> struct crb_priv *priv,
> > if (IS_ERR(priv->cca))
> > return PTR_ERR(priv->cca);
> >
> > - cmd_pa = ((u64) ioread32(&priv->cca->cmd_pa_high) << 32) |
> > - (u64) ioread32(&priv->cca->cmd_pa_low);
> > + /*
> > + * PTT HW bug w/a: wake up the device to access
> > + * possibly not retained registers.
> > + */
> > + ret = crb_cmd_ready(dev, priv);
> > + if (ret)
> > + return ret;
> > +
> > + pa_high = ioread32(&priv->cca->cmd_pa_high);
> > + pa_low = ioread32(&priv->cca->cmd_pa_low);
> > + cmd_pa = ((u64)pa_high << 32) | pa_low;
> > cmd_size = ioread32(&priv->cca->cmd_size);
> > +
> > + dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
> > + pa_high, pa_low, cmd_size);
> > +
> > priv->cmd = crb_map_res(dev, priv, &io_res, cmd_pa, cmd_size);
> > - if (IS_ERR(priv->cmd))
> > - return PTR_ERR(priv->cmd);
> > + if (IS_ERR(priv->cmd)) {
> > + ret = PTR_ERR(priv->cmd);
> > + goto out;
> > + }
> >
> > memcpy_fromio(&rsp_pa, &priv->cca->rsp_pa, 8);
> > rsp_pa = le64_to_cpu(rsp_pa);
> > @@ -359,7 +375,8 @@ static int crb_map_io(struct acpi_device *device,
> > struct crb_priv *priv,
> >
> > if (cmd_pa != rsp_pa) {
> > priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
> > - return PTR_ERR_OR_ZERO(priv->rsp);
> > + ret = PTR_ERR_OR_ZERO(priv->rsp);
> > + goto out;
> > }
> >
> > /* According to the PTP specification, overlapping command and
> > response @@ -367,12 +384,18 @@ static int crb_map_io(struct acpi_device
> *device, struct crb_priv *priv,
> > */
> > if (cmd_size != rsp_size) {
> > dev_err(dev, FW_BUG "overlapping command and response
> buffer sizes are not identical");
> > - return -EINVAL;
> > + ret = -EINVAL;
> > + goto out;
> > }
> > +
> > priv->cmd_size = cmd_size;
> >
> > priv->rsp = priv->cmd;
> > - return 0;
> > +
> > +out:
> > + crb_go_idle(dev, priv);
> > +
> > + return ret;
> > }
> >
> > static int crb_acpi_add(struct acpi_device *device) @@ -416,7 +439,15
> > @@ static int crb_acpi_add(struct acpi_device *device)
> > if (rc)
> > return rc;
> >
> > - return crb_init(device, priv);
> > + rc = crb_cmd_ready(dev, priv);
> > + if (rc)
> > + return rc;
>
> I cannot find any valid reason why crb_map_io calls crb_go_idle in the except
> in the case of a failure. This is something I complained earlier.

Haven't I've already explained that? Each flow has to be enclosed by cmdReady and goIdle. There is nothing different here from the other flows in that matter.
The assumption here is that we are starting in the idle state bug because of the HW bug we cannot access the registers. So the whole w/o is enclosed in the crb_map_io.
After that we are starting from new, from the idle state.


> A minor thing but the extra crb_cmd_ready is basically clutter to the
> initialization.

The extra cmdReady is here in case runtime pm is not compiled into the kernel and assumption here is that we are starting in the idle state.
Please remember that unfortunately we cannot detect whether we are in ready on idle state as the status register is not retained, so everything has to be ordered properly.

Thanks
Tomas

\
 
 \ /
  Last update: 2016-10-08 16:27    [W:0.057 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site