lkml.org 
[lkml]   [2016]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 7/10] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC
From
Date
在 2016/10/7 23:22, Gregory CLEMENT 写道:
> From: Ziji Hu <huziji@marvell.com>
>
> Marvell Xenon eMMC/SD/SDIO Host Controller contains PHY.
> Three types of PHYs are supported.
>
> Add support to multiple types of PHYs init and configuration.
> Add register definitions of PHYs.
>
> Signed-off-by: Hu Ziji <huziji@marvell.com>
> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
> MAINTAINERS | 1 +-
> drivers/mmc/host/Makefile | 2 +-
> drivers/mmc/host/sdhci-xenon-phy.c | 1141 +++++++++++++++++++++++++++++-
> drivers/mmc/host/sdhci-xenon-phy.h | 157 ++++-
> drivers/mmc/host/sdhci-xenon.c | 4 +-
> drivers/mmc/host/sdhci-xenon.h | 17 +-
> 6 files changed, 1321 insertions(+), 1 deletion(-)
> create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
> create mode 100644 drivers/mmc/host/sdhci-xenon-phy.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 859420e5dfd3..b5673c2ee5f2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7583,6 +7583,7 @@ M: Ziji Hu <huziji@marvell.com>
> L: linux-mmc@vger.kernel.org
> S: Supported
> F: drivers/mmc/host/sdhci-xenon.*
> +F: drivers/mmc/host/sdhci-xenon-phy.*

drivers/mmc/host/sdhci-xenon* shoube enough

> F: Documentation/devicetree/bindings/mmc/marvell,sdhci-xenon.txt
>
> MATROX FRAMEBUFFER DRIVER
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 75eaf743486c..4f2854556ff7 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -82,4 +82,4 @@ ifeq ($(CONFIG_CB710_DEBUG),y)
> endif
>
> obj-$(CONFIG_MMC_SDHCI_XENON) += sdhci-xenon-driver.o
> -sdhci-xenon-driver-y += sdhci-xenon.o
> +sdhci-xenon-driver-y += sdhci-xenon.o sdhci-xenon-phy.o
> diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
> new file mode 100644
> index 000000000000..4eb8fea1bec9
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon-phy.c

Well, it's legit to use phy API and move your phy
operations to PHY subsystem. :)

> @@ -0,0 +1,1141 @@
> +/*
> + * PHY support for Xenon SDHC
> + *
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * Author: Hu Ziji <huziji@marvell.com>
> + * Date: 2016-8-24
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + */
> +
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/of_address.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/card.h>
> +#include <linux/mmc/sdio.h>
> +
> +#include "sdhci.h"
> +#include "sdhci-pltfm.h"
> +#include "sdhci-xenon.h"
> +
> +static const char * const phy_types[] = {
> + "sdh phy",
> + "emmc 5.0 phy",
> + "emmc 5.1 phy"
> +};
> +
> +enum phy_type_enum {
> + SDH_PHY,
> + EMMC_5_0_PHY,
> + EMMC_5_1_PHY,
> + NR_PHY_TYPES
> +};
> +
> +struct soc_pad_ctrl_table {
> + const char *soc;
> + void (*set_soc_pad)(struct sdhci_host *host,
> + unsigned char signal_voltage);
> +};
> +
> +struct soc_pad_ctrl {
> + /* Register address of SOC PHY PAD ctrl */
> + void __iomem *reg;
> + /* SOC PHY PAD ctrl type */
> + enum soc_pad_ctrl_type pad_type;
> + /* SOC specific operation to set SOC PHY PAD */
> + void (*set_soc_pad)(struct sdhci_host *host,
> + unsigned char signal_voltage);
> +};
> +
> +static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
> + .timing_adj = EMMC_5_0_PHY_TIMING_ADJUST,
> + .func_ctrl = EMMC_5_0_PHY_FUNC_CONTROL,
> + .pad_ctrl = EMMC_5_0_PHY_PAD_CONTROL,
> + .pad_ctrl2 = EMMC_5_0_PHY_PAD_CONTROL2,
> + .dll_ctrl = EMMC_5_0_PHY_DLL_CONTROL,
> + .logic_timing_adj = EMMC_5_0_PHY_LOGIC_TIMING_ADJUST,
> + .delay_mask = EMMC_5_0_PHY_FIXED_DELAY_MASK,
> + .dll_update = DLL_UPDATE_STROBE_5_0,
> +};
> +
> +static struct xenon_emmc_phy_regs xenon_emmc_5_1_phy_regs = {
> + .timing_adj = EMMC_PHY_TIMING_ADJUST,
> + .func_ctrl = EMMC_PHY_FUNC_CONTROL,
> + .pad_ctrl = EMMC_PHY_PAD_CONTROL,
> + .pad_ctrl2 = EMMC_PHY_PAD_CONTROL2,
> + .dll_ctrl = EMMC_PHY_DLL_CONTROL,
> + .logic_timing_adj = EMMC_PHY_LOGIC_TIMING_ADJUST,
> + .delay_mask = EMMC_PHY_FIXED_DELAY_MASK,
> + .dll_update = DLL_UPDATE,
> +};
> +
> +static int xenon_delay_adj_test(struct mmc_card *card);
> +
> +/*
> + * eMMC PHY configuration and operations
> + */
> +struct emmc_phy_params {
> + bool slow_mode;
> +
> + u8 znr;
> + u8 zpr;
> +
> + /* Nr of consecutive Sampling Points of a Valid Sampling Window */
> + u8 nr_tun_times;
> + /* Divider for calculating Tuning Step */
> + u8 tun_step_divider;
> +
> + struct soc_pad_ctrl pad_ctrl;
> +};
> +
> +static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host,
> + struct mmc_card *card);
> +static int xenon_emmc_phy_fix_sampl_delay_adj(struct sdhci_host *host,
> + struct mmc_card *card);
> +static void xenon_emmc_phy_set(struct sdhci_host *host,
> + unsigned char timing);
> +static void xenon_emmc_set_soc_pad(struct sdhci_host *host,
> + unsigned char signal_voltage);
> +
> +static const struct xenon_phy_ops emmc_phy_ops = {
> + .strobe_delay_adj = xenon_emmc_phy_strobe_delay_adj,
> + .fix_sampl_delay_adj = xenon_emmc_phy_fix_sampl_delay_adj,
> + .phy_set = xenon_emmc_phy_set,
> + .set_soc_pad = xenon_emmc_set_soc_pad,
> +};
> +
> +static int alloc_emmc_phy(struct sdhci_xenon_priv *priv)
> +{
> + struct emmc_phy_params *params;
> +
> + params = kzalloc(sizeof(*params), GFP_KERNEL);
> + if (!params)
> + return -ENOMEM;
> +
> + priv->phy_params = params;
> + priv->phy_ops = &emmc_phy_ops;
> + if (priv->phy_type == EMMC_5_0_PHY)
> + priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs;
> + else
> + priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs;
> +
> + return 0;
> +}
> +
> +static int xenon_emmc_phy_init(struct sdhci_host *host)
> +{
> + u32 reg;
> + u32 wait, clock;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
> +
> + reg = sdhci_readl(host, phy_regs->timing_adj);
> + reg |= PHY_INITIALIZAION;
> + sdhci_writel(host, reg, phy_regs->timing_adj);
> +
> + /* Add duration of FC_SYNC_RST */
> + wait = ((reg >> FC_SYNC_RST_DURATION_SHIFT) &
> + FC_SYNC_RST_DURATION_MASK);
> + /* Add interval between FC_SYNC_EN and FC_SYNC_RST */
> + wait += ((reg >> FC_SYNC_RST_EN_DURATION_SHIFT) &
> + FC_SYNC_RST_EN_DURATION_MASK);
> + /* Add duration of asserting FC_SYNC_EN */
> + wait += ((reg >> FC_SYNC_EN_DURATION_SHIFT) &
> + FC_SYNC_EN_DURATION_MASK);
> + /* Add duration of waiting for PHY */
> + wait += ((reg >> WAIT_CYCLE_BEFORE_USING_SHIFT) &
> + WAIT_CYCLE_BEFORE_USING_MASK);
> + /* 4 addtional bus clock and 4 AXI bus clock are required */
> + wait += 8;
> + wait <<= 20;
> +
> + clock = host->clock;
> + if (!clock)
> + /* Use the possibly slowest bus frequency value */
> + clock = LOWEST_SDCLK_FREQ;
> + /* get the wait time */
> + wait /= clock;
> + wait++;
> + /* wait for host eMMC PHY init completes */
> + udelay(wait);
> +
> + reg = sdhci_readl(host, phy_regs->timing_adj);
> + reg &= PHY_INITIALIZAION;
> + if (reg) {
> + dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
> + wait);
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +}
> +
> +#define ARMADA_3700_SOC_PAD_1_8V 0x1
> +#define ARMADA_3700_SOC_PAD_3_3V 0x0
> +
> +static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host,
> + unsigned char signal_voltage)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct emmc_phy_params *params = priv->phy_params;
> +
> + if (params->pad_ctrl.pad_type == SOC_PAD_FIXED_1_8V) {
> + writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
> + } else if (params->pad_ctrl.pad_type == SOC_PAD_SD) {
> + if (signal_voltage == MMC_SIGNAL_VOLTAGE_180)
> + writel(ARMADA_3700_SOC_PAD_1_8V, params->pad_ctrl.reg);
> + else if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
> + writel(ARMADA_3700_SOC_PAD_3_3V, params->pad_ctrl.reg);
> + }
> +}
> +
> +static void xenon_emmc_set_soc_pad(struct sdhci_host *host,
> + unsigned char signal_voltage)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct emmc_phy_params *params = priv->phy_params;
> +
> + if (!params->pad_ctrl.reg)
> + return;
> +
> + if (params->pad_ctrl.set_soc_pad)
> + params->pad_ctrl.set_soc_pad(host, signal_voltage);
> +}
> +
> +static int emmc_phy_set_fix_sampl_delay(struct sdhci_host *host,
> + unsigned int delay,
> + bool invert,
> + bool delay_90_degree)
> +{
> + u32 reg;
> + unsigned long flags;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
> + int ret = 0;
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + /* Setup Sampling fix delay */
> + reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
> + reg &= ~phy_regs->delay_mask;
> + reg |= delay & phy_regs->delay_mask;
> + sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
> +
> + if (priv->phy_type == EMMC_5_0_PHY) {
> + /* set 90 degree phase if necessary */
> + reg &= ~DELAY_90_DEGREE_MASK_EMMC5;
> + reg |= (delay_90_degree << DELAY_90_DEGREE_SHIFT_EMMC5);
> + sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
> + }
> +
> + /* Disable SDCLK */
> + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> + reg &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
> + sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
> +
> + udelay(200);
> +
> + if (priv->phy_type == EMMC_5_1_PHY) {
> + /* set 90 degree phase if necessary */
> + reg = sdhci_readl(host, EMMC_PHY_FUNC_CONTROL);
> + reg &= ~ASYNC_DDRMODE_MASK;
> + reg |= (delay_90_degree << ASYNC_DDRMODE_SHIFT);
> + sdhci_writel(host, reg, EMMC_PHY_FUNC_CONTROL);
> + }
> +
> + /* Setup Inversion of Sampling edge */
> + reg = sdhci_readl(host, phy_regs->timing_adj);
> + reg &= ~SAMPL_INV_QSP_PHASE_SELECT;
> + reg |= (invert << SAMPL_INV_QSP_PHASE_SELECT_SHIFT);
> + sdhci_writel(host, reg, phy_regs->timing_adj);
> +
> + /* Enable SD internal clock */
> + ret = enable_xenon_internal_clk(host);
> + if (ret)
> + goto out;
> +
> + /* Enable SDCLK */
> + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> + reg |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
> +
> + udelay(200);
> +
> + /*
> + * Has to re-initialize eMMC PHY here to active PHY
> + * because later get status cmd will be issued.
> + */
> + ret = xenon_emmc_phy_init(host);
> +
> +out:
> + spin_unlock_irqrestore(&host->lock, flags);
> + return ret;
> +}
> +
> +static int emmc_phy_do_fix_sampl_delay(struct sdhci_host *host,
> + struct mmc_card *card,
> + unsigned int delay,
> + bool invert, bool quarter)
> +{
> + int ret;
> +
> + emmc_phy_set_fix_sampl_delay(host, delay, invert, quarter);
> +
> + ret = xenon_delay_adj_test(card);
> + if (ret) {
> + dev_dbg(mmc_dev(host->mmc),
> + "fail when sampling fix delay = %d, phase = %d degree\n",
> + delay, invert * 180 + quarter * 90);
> + return -1;
> + }
> + return 0;
> +}
> +
> +static int xenon_emmc_phy_fix_sampl_delay_adj(struct sdhci_host *host,
> + struct mmc_card *card)
> +{
> + enum sampl_fix_delay_phase phase;
> + int idx, nr_pair;
> + int ret;
> + unsigned int delay;
> + unsigned int min_delay, max_delay;
> + bool invert, quarter;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
> + u32 coarse_step, fine_step;
> + const enum sampl_fix_delay_phase delay_edge[] = {
> + PHASE_0_DEGREE,
> + PHASE_180_DEGREE,
> + PHASE_90_DEGREE,
> + PHASE_270_DEGREE
> + };
> +
> + coarse_step = phy_regs->delay_mask >> 1;
> + fine_step = coarse_step >> 2;
> +
> + nr_pair = ARRAY_SIZE(delay_edge);
> +
> + for (idx = 0; idx < nr_pair; idx++) {
> + phase = delay_edge[idx];
> + invert = (phase & 0x2) ? true : false;
> + quarter = (phase & 0x1) ? true : false;
> +
> + /* increase delay value to get fix delay */
> + for (min_delay = 0;
> + min_delay <= phy_regs->delay_mask;
> + min_delay += coarse_step) {
> + ret = emmc_phy_do_fix_sampl_delay(host, card, min_delay,
> + invert, quarter);
> + if (!ret)
> + break;
> + }
> +
> + if (ret) {
> + dev_dbg(mmc_dev(host->mmc),
> + "Fail to set Sampling Fixed Delay with phase = %d degree\n",
> + phase * 90);
> + continue;
> + }
> +
> + for (max_delay = min_delay + fine_step;
> + max_delay < phy_regs->delay_mask;
> + max_delay += fine_step) {
> + ret = emmc_phy_do_fix_sampl_delay(host, card, max_delay,
> + invert, quarter);
> + if (ret) {
> + max_delay -= fine_step;
> + break;
> + }
> + }
> +
> + if (!ret) {
> + ret = emmc_phy_do_fix_sampl_delay(host, card,
> + phy_regs->delay_mask,
> + invert, quarter);
> + if (!ret)
> + max_delay = phy_regs->delay_mask;
> + }
> +
> + /*
> + * Sampling Fixed Delay line window should be large enough,
> + * thus the sampling point (the middle of the window)
> + * can work when environment varies.
> + * However, there is no clear conclusion how large the window
> + * should be.
> + */
> + if ((max_delay - min_delay) <=
> + EMMC_PHY_FIXED_DELAY_WINDOW_MIN) {
> + dev_info(mmc_dev(host->mmc),
> + "The window size %d with phase = %d degree is too small\n",
> + max_delay - min_delay, phase * 90);
> + continue;
> + }
> +
> + delay = (min_delay + max_delay) / 2;
> + emmc_phy_set_fix_sampl_delay(host, delay, invert, quarter);
> + dev_dbg(mmc_dev(host->mmc),
> + "sampling fix delay = %d with phase = %d degree\n",
> + delay, phase * 90);
> + return 0;
> + }
> +
> + return -EIO;
> +}
> +
> +static int xenon_emmc_phy_enable_dll(struct sdhci_host *host)
> +{
> + u32 reg;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
> + u8 timeout;
> +
> + if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
> + return -EINVAL;
> +
> + reg = sdhci_readl(host, phy_regs->dll_ctrl);
> + if (reg & DLL_ENABLE)
> + return 0;
> +
> + /* Enable DLL */
> + reg = sdhci_readl(host, phy_regs->dll_ctrl);
> + reg |= (DLL_ENABLE | DLL_FAST_LOCK);
> +
> + /*
> + * Set Phase as 90 degree, which is most common value.
> + * Might set another value if necessary.
> + * The granularity is 1 degree.
> + */
> + reg &= ~((DLL_PHASE_MASK << DLL_PHSEL0_SHIFT) |
> + (DLL_PHASE_MASK << DLL_PHSEL1_SHIFT));
> + reg |= ((DLL_PHASE_90_DEGREE << DLL_PHSEL0_SHIFT) |
> + (DLL_PHASE_90_DEGREE << DLL_PHSEL1_SHIFT));
> +
> + reg &= ~DLL_BYPASS_EN;
> + reg |= phy_regs->dll_update;
> + if (priv->phy_type == EMMC_5_1_PHY)
> + reg &= ~DLL_REFCLK_SEL;
> + sdhci_writel(host, reg, phy_regs->dll_ctrl);
> +
> + /* Wait max 32 ms */
> + timeout = 32;
> + while (!(sdhci_readw(host, SDHC_SLOT_EXT_PRESENT_STATE) & LOCK_STATE)) {
> + if (!timeout) {
> + dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
> + return -ETIMEDOUT;
> + }
> + timeout--;
> + mdelay(1);
> + }
> + return 0;
> +}
> +
> +static int __emmc_phy_config_tuning(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct emmc_phy_params *params = priv->phy_params;
> + u32 reg, tuning_step;
> + int ret;
> + unsigned long flags;
> +
> + if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
> + return -EINVAL;
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + ret = xenon_emmc_phy_enable_dll(host);
> + if (ret) {
> + spin_unlock_irqrestore(&host->lock, flags);
> + return ret;
> + }
> +
> + reg = sdhci_readl(host, SDHC_SLOT_DLL_CUR_DLY_VAL);
> + tuning_step = reg / params->tun_step_divider;
> + if (unlikely(tuning_step > TUNING_STEP_MASK)) {
> + dev_warn(mmc_dev(host->mmc),
> + "HS200 TUNING_STEP %d is larger than MAX value\n",
> + tuning_step);
> + tuning_step = TUNING_STEP_MASK;
> + }
> +
> + reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
> + reg &= ~(TUN_CONSECUTIVE_TIMES_MASK << TUN_CONSECUTIVE_TIMES_SHIFT);
> + reg |= (params->nr_tun_times << TUN_CONSECUTIVE_TIMES_SHIFT);
> + reg &= ~(TUNING_STEP_MASK << TUNING_STEP_SHIFT);
> + reg |= (tuning_step << TUNING_STEP_SHIFT);
> + sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
> +
> + spin_unlock_irqrestore(&host->lock, flags);
> + return 0;
> +}
> +
> +static int xenon_emmc_phy_config_tuning(struct sdhci_host *host)
> +{
> + return __emmc_phy_config_tuning(host);
> +}
> +
> +static void xenon_emmc_phy_strobe_delay_adj(struct sdhci_host *host,
> + struct mmc_card *card)
> +{
> + u32 reg;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + unsigned long flags;
> +
> + if (host->clock <= MMC_HIGH_52_MAX_DTR)
> + return;
> +
> + dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n");
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + xenon_emmc_phy_enable_dll(host);
> +
> + /* Enable SDHC Data Strobe */
> + reg = sdhci_readl(host, SDHC_SLOT_EMMC_CTRL);
> + reg |= ENABLE_DATA_STROBE;
> + sdhci_writel(host, reg, SDHC_SLOT_EMMC_CTRL);
> +
> + /* Set Data Strobe Pull down */
> + if (priv->phy_type == EMMC_5_0_PHY) {
> + reg = sdhci_readl(host, EMMC_5_0_PHY_PAD_CONTROL);
> + reg |= EMMC5_FC_QSP_PD;
> + reg &= ~EMMC5_FC_QSP_PU;
> + sdhci_writel(host, reg, EMMC_5_0_PHY_PAD_CONTROL);
> + } else {
> + reg = sdhci_readl(host, EMMC_PHY_PAD_CONTROL1);
> + reg |= EMMC5_1_FC_QSP_PD;
> + reg &= ~EMMC5_1_FC_QSP_PU;
> + sdhci_writel(host, reg, EMMC_PHY_PAD_CONTROL1);
> + }
> + spin_unlock_irqrestore(&host->lock, flags);
> +}
> +
> +#define LOGIC_TIMING_VALUE 0x00AA8977
> +
> +static void xenon_emmc_phy_set(struct sdhci_host *host,
> + unsigned char timing)
> +{
> + u32 reg;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct emmc_phy_params *params = priv->phy_params;
> + struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
> + struct mmc_card *card = priv->card_candidate;
> + unsigned long flags;
> +
> + dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n");
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + /* Setup pad, set bit[28] and bits[26:24] */
> + reg = sdhci_readl(host, phy_regs->pad_ctrl);
> + reg |= (FC_DQ_RECEN | FC_CMD_RECEN | FC_QSP_RECEN | OEN_QSN);
> + /*
> + * All FC_XX_RECEIVCE should be set as CMOS Type
> + */
> + reg |= FC_ALL_CMOS_RECEIVER;
> + sdhci_writel(host, reg, phy_regs->pad_ctrl);
> +
> + /* Set CMD and DQ Pull Up */
> + if (priv->phy_type == EMMC_5_0_PHY) {
> + reg = sdhci_readl(host, EMMC_5_0_PHY_PAD_CONTROL);
> + reg |= (EMMC5_FC_CMD_PU | EMMC5_FC_DQ_PU);
> + reg &= ~(EMMC5_FC_CMD_PD | EMMC5_FC_DQ_PD);
> + sdhci_writel(host, reg, EMMC_5_0_PHY_PAD_CONTROL);
> + } else {
> + reg = sdhci_readl(host, EMMC_PHY_PAD_CONTROL1);
> + reg |= (EMMC5_1_FC_CMD_PU | EMMC5_1_FC_DQ_PU);
> + reg &= ~(EMMC5_1_FC_CMD_PD | EMMC5_1_FC_DQ_PD);
> + sdhci_writel(host, reg, EMMC_PHY_PAD_CONTROL1);
> + }
> +
> + if ((timing == MMC_TIMING_LEGACY) || !card)
> + goto phy_init;
> +
> + /*
> + * FIXME: should depends on the specific board timing.
> + */
> + if ((timing == MMC_TIMING_MMC_HS400) ||
> + (timing == MMC_TIMING_MMC_HS200) ||
> + (timing == MMC_TIMING_UHS_SDR50) ||
> + (timing == MMC_TIMING_UHS_SDR104) ||
> + (timing == MMC_TIMING_UHS_DDR50) ||
> + (timing == MMC_TIMING_UHS_SDR25) ||
> + (timing == MMC_TIMING_MMC_DDR52)) {
> + reg = sdhci_readl(host, phy_regs->timing_adj);
> + reg &= ~OUTPUT_QSN_PHASE_SELECT;
> + sdhci_writel(host, reg, phy_regs->timing_adj);
> + }
> +
> + /*
> + * If SDIO card, set SDIO Mode
> + * Otherwise, clear SDIO Mode and Slow Mode
> + */
> + if (mmc_card_sdio(card)) {
> + reg = sdhci_readl(host, phy_regs->timing_adj);
> + reg |= TIMING_ADJUST_SDIO_MODE;
> +
> + if ((timing == MMC_TIMING_UHS_SDR25) ||
> + (timing == MMC_TIMING_UHS_SDR12) ||
> + (timing == MMC_TIMING_SD_HS) ||
> + (timing == MMC_TIMING_LEGACY))
> + reg |= TIMING_ADJUST_SLOW_MODE;
> +
> + sdhci_writel(host, reg, phy_regs->timing_adj);
> + } else {
> + reg = sdhci_readl(host, phy_regs->timing_adj);
> + reg &= ~(TIMING_ADJUST_SDIO_MODE | TIMING_ADJUST_SLOW_MODE);
> + sdhci_writel(host, reg, phy_regs->timing_adj);
> + }
> +
> + if (((timing == MMC_TIMING_UHS_SDR50) ||
> + (timing == MMC_TIMING_UHS_SDR25) ||
> + (timing == MMC_TIMING_UHS_SDR12) ||
> + (timing == MMC_TIMING_SD_HS) ||
> + (timing == MMC_TIMING_MMC_HS) ||
> + (timing == MMC_TIMING_LEGACY)) && params->slow_mode) {
> + reg = sdhci_readl(host, phy_regs->timing_adj);
> + reg |= TIMING_ADJUST_SLOW_MODE;
> + sdhci_writel(host, reg, phy_regs->timing_adj);
> + }
> +
> + /*
> + * Set preferred ZNR and ZPR value
> + * The ZNR and ZPR value vary between different boards.
> + * Define them both in sdhci-xenon-emmc-phy.h.
> + */
> + reg = sdhci_readl(host, phy_regs->pad_ctrl2);
> + reg &= ~((ZNR_MASK << ZNR_SHIFT) | ZPR_MASK);
> + reg |= ((params->znr << ZNR_SHIFT) | params->zpr);
> + sdhci_writel(host, reg, phy_regs->pad_ctrl2);
> +
> + /*
> + * When setting EMMC_PHY_FUNC_CONTROL register,
> + * SD clock should be disabled
> + */
> + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> + reg &= ~SDHCI_CLOCK_CARD_EN;
> + sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
> +
> + if ((timing == MMC_TIMING_UHS_DDR50) ||
> + (timing == MMC_TIMING_MMC_HS400) ||
> + (timing == MMC_TIMING_MMC_DDR52)) {
> + reg = sdhci_readl(host, phy_regs->func_ctrl);
> + reg |= (DQ_DDR_MODE_MASK << DQ_DDR_MODE_SHIFT) | CMD_DDR_MODE;
> + sdhci_writel(host, reg, phy_regs->func_ctrl);
> + }
> +
> + if (timing == MMC_TIMING_MMC_HS400) {
> + reg = sdhci_readl(host, phy_regs->func_ctrl);
> + reg &= ~DQ_ASYNC_MODE;
> + sdhci_writel(host, reg, phy_regs->func_ctrl);
> + }
> +
> + /* Enable bus clock */
> + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> + reg |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
> +
> + if (timing == MMC_TIMING_MMC_HS400)
> + /* Hardware team recommend a value for HS400 */
> + sdhci_writel(host, LOGIC_TIMING_VALUE,
> + phy_regs->logic_timing_adj);
> +
> +phy_init:
> + xenon_emmc_phy_init(host);
> +
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> + dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
> +}
> +
> +static int get_dt_pad_ctrl_data(struct sdhci_host *host,
> + struct device_node *np,
> + struct emmc_phy_params *params)
> +{
> + int ret = 0;
> + const char *name;
> + struct resource iomem;
> +
> + if (of_device_is_compatible(np, "marvell,armada-3700-sdhci"))
> + params->pad_ctrl.set_soc_pad = armada_3700_soc_pad_voltage_set;
> + else
> + return 0;
> +
> + if (of_address_to_resource(np, 1, &iomem)) {
> + dev_err(mmc_dev(host->mmc), "Unable to find SOC PAD ctrl register address for %s\n",
> + np->name);
> + return -EINVAL;
> + }
> +
> + params->pad_ctrl.reg = devm_ioremap_resource(mmc_dev(host->mmc),
> + &iomem);
> + if (IS_ERR(params->pad_ctrl.reg)) {
> + dev_err(mmc_dev(host->mmc), "Unable to get SOC PHY PAD ctrl regiser for %s\n",
> + np->name);
> + return PTR_ERR(params->pad_ctrl.reg);
> + }
> +
> + ret = of_property_read_string(np, "xenon,pad-type", &name);
> + if (ret) {
> + dev_err(mmc_dev(host->mmc), "Unable to determine SOC PHY PAD ctrl type\n");
> + return ret;
> + }
> + if (!strcmp(name, "sd")) {
> + params->pad_ctrl.pad_type = SOC_PAD_SD;
> + } else if (!strcmp(name, "fixed-1-8v")) {
> + params->pad_ctrl.pad_type = SOC_PAD_FIXED_1_8V;
> + } else {
> + dev_err(mmc_dev(host->mmc), "Unsupported SOC PHY PAD ctrl type %s\n",
> + name);
> + return -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int emmc_phy_parse_param_dt(struct sdhci_host *host,
> + struct device_node *np,
> + struct emmc_phy_params *params)
> +{
> + u32 value;
> +
> + if (of_property_read_bool(np, "xenon,phy-slow-mode"))
> + params->slow_mode = true;
> + else
> + params->slow_mode = false;
> +
> + if (!of_property_read_u32(np, "xenon,phy-znr", &value))
> + params->znr = value & ZNR_MASK;
> + else
> + params->znr = ZNR_DEF_VALUE;
> +
> + if (!of_property_read_u32(np, "xenon,phy-zpr", &value))
> + params->zpr = value & ZPR_MASK;
> + else
> + params->zpr = ZPR_DEF_VALUE;
> +
> + if (!of_property_read_u32(np, "xenon,phy-nr-tun-times", &value))
> + params->nr_tun_times = value & TUN_CONSECUTIVE_TIMES_MASK;
> + else
> + params->nr_tun_times = TUN_CONSECUTIVE_TIMES;
> +
> + if (!of_property_read_u32(np, "xenon,phy-tun-step-divider", &value))
> + params->tun_step_divider = value & 0xFF;
> + else
> + params->tun_step_divider = TUNING_STEP_DIVIDER;
> +
> + return get_dt_pad_ctrl_data(host, np, params);
> +}
> +
> +/*
> + * SDH PHY configuration and operations
> + */
> +static int xenon_sdh_phy_set_fix_sampl_delay(struct sdhci_host *host,
> + unsigned int delay, bool invert)
> +{
> + u32 reg;
> + unsigned long flags;
> + int ret;
> +
> + if (invert)
> + invert = 0x1;
> + else
> + invert = 0x0;
> +
> + spin_lock_irqsave(&host->lock, flags);
> +
> + /* Disable SDCLK */
> + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> + reg &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
> + sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
> +
> + udelay(200);
> +
> + /* Setup Sampling fix delay */
> + reg = sdhci_readl(host, SDHC_SLOT_OP_STATUS_CTRL);
> + reg &= ~(SDH_PHY_FIXED_DELAY_MASK |
> + (0x1 << FORCE_SEL_INVERSE_CLK_SHIFT));
> + reg |= ((delay & SDH_PHY_FIXED_DELAY_MASK) |
> + (invert << FORCE_SEL_INVERSE_CLK_SHIFT));
> + sdhci_writel(host, reg, SDHC_SLOT_OP_STATUS_CTRL);
> +
> + /* Enable SD internal clock */
> + ret = enable_xenon_internal_clk(host);
> +
> + /* Enable SDCLK */
> + reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
> + reg |= SDHCI_CLOCK_CARD_EN;
> + sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
> +
> + udelay(200);
> +
> + spin_unlock_irqrestore(&host->lock, flags);
> + return ret;
> +}
> +
> +static int sdh_phy_do_fix_sampl_delay(struct sdhci_host *host,
> + struct mmc_card *card,
> + unsigned int delay, bool invert)
> +{
> + int ret;
> +
> + xenon_sdh_phy_set_fix_sampl_delay(host, delay, invert);
> +
> + ret = xenon_delay_adj_test(card);
> + if (ret) {
> + dev_dbg(mmc_dev(host->mmc),
> + "fail when sampling fix delay = %d, phase = %d degree\n",
> + delay, invert * 180);
> + return -1;
> + }
> + return 0;
> +}
> +
> +#define SDH_PHY_COARSE_FIX_DELAY (SDH_PHY_FIXED_DELAY_MASK / 2)
> +#define SDH_PHY_FINE_FIX_DELAY (SDH_PHY_COARSE_FIX_DELAY / 4)
> +
> +static int xenon_sdh_phy_fix_sampl_delay_adj(struct sdhci_host *host,
> + struct mmc_card *card)
> +{
> + u32 reg;
> + bool dll_enable = false;
> + unsigned int min_delay, max_delay, delay;
> + const bool sampl_edge[] = {
> + false,
> + true,
> + };
> + int i, nr;
> + int ret;
> +
> + if (host->clock > HIGH_SPEED_MAX_DTR) {
> + /* Enable DLL when SDCLK is higher than 50MHz */
> + reg = sdhci_readl(host, SDH_PHY_SLOT_DLL_CTRL);
> + if (!(reg & SDH_PHY_ENABLE_DLL)) {
> + reg |= (SDH_PHY_ENABLE_DLL | SDH_PHY_FAST_LOCK_EN);
> + sdhci_writel(host, reg, SDH_PHY_SLOT_DLL_CTRL);
> + mdelay(1);
> +
> + reg = sdhci_readl(host, SDH_PHY_SLOT_DLL_PHASE_SEL);
> + reg |= SDH_PHY_DLL_UPDATE_TUNING;
> + sdhci_writel(host, reg, SDH_PHY_SLOT_DLL_PHASE_SEL);
> + }
> + dll_enable = true;
> + }
> +
> + nr = dll_enable ? ARRAY_SIZE(sampl_edge) : 1;
> + for (i = 0; i < nr; i++) {
> + for (min_delay = 0; min_delay <= SDH_PHY_FIXED_DELAY_MASK;
> + min_delay += SDH_PHY_COARSE_FIX_DELAY) {
> + ret = sdh_phy_do_fix_sampl_delay(host, card, min_delay,
> + sampl_edge[i]);
> + if (!ret)
> + break;
> + }
> +
> + if (ret) {
> + dev_dbg(mmc_dev(host->mmc),
> + "Fail to set Fixed Sampling Delay with %s edge\n",
> + sampl_edge[i] ? "negative" : "positive");
> + continue;
> + }
> +
> + for (max_delay = min_delay + SDH_PHY_FINE_FIX_DELAY;
> + max_delay < SDH_PHY_FIXED_DELAY_MASK;
> + max_delay += SDH_PHY_FINE_FIX_DELAY) {
> + ret = sdh_phy_do_fix_sampl_delay(host, card, max_delay,
> + sampl_edge[i]);
> + if (ret) {
> + max_delay -= SDH_PHY_FINE_FIX_DELAY;
> + break;
> + }
> + }
> +
> + if (!ret) {
> + delay = SDH_PHY_FIXED_DELAY_MASK;
> + ret = sdh_phy_do_fix_sampl_delay(host, card, delay,
> + sampl_edge[i]);
> + if (!ret)
> + max_delay = SDH_PHY_FIXED_DELAY_MASK;
> + }
> +
> + if ((max_delay - min_delay) <= SDH_PHY_FIXED_DELAY_WINDOW_MIN) {
> + dev_info(mmc_dev(host->mmc),
> + "The window size %d with %s edge is too small\n",
> + max_delay - min_delay,
> + sampl_edge[i] ? "negative" : "positive");
> + continue;
> + }
> +
> + delay = (min_delay + max_delay) / 2;
> + xenon_sdh_phy_set_fix_sampl_delay(host, delay, sampl_edge[i]);
> + dev_dbg(mmc_dev(host->mmc), "sampling fix delay = %d with %s edge\n",
> + delay, sampl_edge[i] ? "negative" : "positive");
> + return 0;
> + }
> + return -EIO;
> +}
> +
> +static const struct xenon_phy_ops sdh_phy_ops = {
> + .fix_sampl_delay_adj = xenon_sdh_phy_fix_sampl_delay_adj,
> +};
> +
> +static int alloc_sdh_phy(struct sdhci_xenon_priv *priv)
> +{
> + priv->phy_params = NULL;
> + priv->phy_ops = &sdh_phy_ops;
> + return 0;
> +}
> +
> +/*
> + * Common functions for all PHYs
> + */
> +void xenon_soc_pad_ctrl(struct sdhci_host *host,
> + unsigned char signal_voltage)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + if (priv->phy_ops->set_soc_pad)
> + priv->phy_ops->set_soc_pad(host, signal_voltage);
> +}
> +
> +static int __xenon_emmc_delay_adj_test(struct mmc_card *card)
> +{
> + int err;
> + u8 *ext_csd = NULL;
> +
> + err = mmc_get_ext_csd(card, &ext_csd);
> + kfree(ext_csd);
> +
> + return err;
> +}
> +
> +static int __xenon_sdio_delay_adj_test(struct mmc_card *card)
> +{
> + struct mmc_command cmd = {0};
> + int err;
> +
> + cmd.opcode = SD_IO_RW_DIRECT;
> + cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
> +
> + err = mmc_wait_for_cmd(card->host, &cmd, 0);
> + if (err)
> + return err;
> +
> + if (cmd.resp[0] & R5_ERROR)
> + return -EIO;
> + if (cmd.resp[0] & R5_FUNCTION_NUMBER)
> + return -EINVAL;
> + if (cmd.resp[0] & R5_OUT_OF_RANGE)
> + return -ERANGE;
> + return 0;
> +}
> +
> +static int __xenon_sd_delay_adj_test(struct mmc_card *card)
> +{
> + struct mmc_command cmd = {0};
> + int err;
> +
> + cmd.opcode = MMC_SEND_STATUS;
> + cmd.arg = card->rca << 16;
> + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
> +
> + err = mmc_wait_for_cmd(card->host, &cmd, 0);
> + return err;
> +}
> +
> +static int xenon_delay_adj_test(struct mmc_card *card)
> +{
> + WARN_ON(!card);
> + WARN_ON(!card->host);
> +
> + if (mmc_card_mmc(card))
> + return __xenon_emmc_delay_adj_test(card);
> + else if (mmc_card_sd(card))
> + return __xenon_sd_delay_adj_test(card);
> + else if (mmc_card_sdio(card))
> + return __xenon_sdio_delay_adj_test(card);
> + else
> + return -EINVAL;
> +}
> +
> +static void xenon_phy_set(struct sdhci_host *host, unsigned char timing)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + if (priv->phy_ops->phy_set)
> + priv->phy_ops->phy_set(host, timing);
> +}
> +
> +static void xenon_hs400_strobe_delay_adj(struct sdhci_host *host,
> + struct mmc_card *card)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + if (WARN_ON(!mmc_card_hs400(card)))
> + return;
> +
> + /* Enable the DLL to automatically adjust HS400 strobe delay.
> + */
> + if (priv->phy_ops->strobe_delay_adj)
> + priv->phy_ops->strobe_delay_adj(host, card);
> +}
> +
> +static int xenon_fix_sampl_delay_adj(struct sdhci_host *host,
> + struct mmc_card *card)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + if (priv->phy_ops->fix_sampl_delay_adj)
> + return priv->phy_ops->fix_sampl_delay_adj(host, card);
> +
> + return 0;
> +}
> +
> +/*
> + * xenon_delay_adj should not be called inside IRQ context,
> + * either Hard IRQ or Softirq.
> + */
> +static int xenon_hs_delay_adj(struct sdhci_host *host,
> + struct mmc_card *card)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + int ret = 0;
> +
> + if (WARN_ON(host->clock <= DEFAULT_SDCLK_FREQ))
> + return -EINVAL;
> +
> + if (mmc_card_hs400(card)) {
> + xenon_hs400_strobe_delay_adj(host, card);
> + return 0;
> + }
> +
> + if (((priv->phy_type == EMMC_5_1_PHY) ||
> + (priv->phy_type == EMMC_5_0_PHY)) &&
> + (mmc_card_hs200(card) ||
> + (host->timing == MMC_TIMING_UHS_SDR104))) {
> + ret = xenon_emmc_phy_config_tuning(host);
> + if (!ret)
> + return 0;
> + }
> +
> + ret = xenon_fix_sampl_delay_adj(host, card);
> + if (ret)
> + dev_err(mmc_dev(host->mmc), "fails sampling fixed delay adjustment\n");
> + return ret;
> +}
> +
> +int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
> +{
> + struct mmc_host *mmc = host->mmc;
> + struct mmc_card *card;
> + int ret = 0;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> +
> + if (!host->clock) {
> + priv->clock = 0;
> + return 0;
> + }
> +
> + /*
> + * The timing, frequency or bus width is changed,
> + * better to set eMMC PHY based on current setting
> + * and adjust Xenon SDHC delay.
> + */
> + if ((host->clock == priv->clock) &&
> + (ios->bus_width == priv->bus_width) &&
> + (ios->timing == priv->timing))
> + return 0;
> +
> + xenon_phy_set(host, ios->timing);
> +
> + /* Update the record */
> + priv->bus_width = ios->bus_width;
> + /* Temp stage from HS200 to HS400 */
> + if (((priv->timing == MMC_TIMING_MMC_HS200) &&
> + (ios->timing == MMC_TIMING_MMC_HS)) ||
> + ((ios->timing == MMC_TIMING_MMC_HS) &&
> + (priv->clock > host->clock))) {
> + priv->timing = ios->timing;
> + priv->clock = host->clock;
> + return 0;
> + }
> + priv->timing = ios->timing;
> + priv->clock = host->clock;
> +
> + /* Legacy mode is a special case */
> + if (ios->timing == MMC_TIMING_LEGACY)
> + return 0;
> +
> + card = priv->card_candidate;
> + if (unlikely(!card)) {
> + dev_warn(mmc_dev(mmc), "card is not present\n");
> + return -EINVAL;
> + }
> +
> + if (host->clock > DEFAULT_SDCLK_FREQ)
> + ret = xenon_hs_delay_adj(host, card);
> + return ret;
> +}
> +
> +static int add_xenon_phy(struct device_node *np, struct sdhci_host *host,
> + const char *phy_name)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + int i, ret;
> +
> + for (i = 0; i < NR_PHY_TYPES; i++) {
> + if (!strcmp(phy_name, phy_types[i])) {
> + priv->phy_type = i;
> + break;
> + }
> + }
> + if (i == NR_PHY_TYPES) {
> + dev_err(mmc_dev(host->mmc),
> + "Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
> + phy_name);
> + priv->phy_type = EMMC_5_1_PHY;
> + }
> +
> + if (priv->phy_type == SDH_PHY) {
> + return alloc_sdh_phy(priv);
> + } else if ((priv->phy_type == EMMC_5_0_PHY) ||
> + (priv->phy_type == EMMC_5_1_PHY)) {
> + ret = alloc_emmc_phy(priv);
> + if (ret)
> + return ret;
> + return emmc_phy_parse_param_dt(host, np, priv->phy_params);
> + }
> +
> + return -EINVAL;
> +}
> +
> +int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
> +{
> + const char *phy_type = NULL;
> +
> + if (!of_property_read_string(np, "xenon,phy-type", &phy_type))
> + return add_xenon_phy(np, host, phy_type);
> +
> + dev_err(mmc_dev(host->mmc), "Fail to get Xenon PHY type. Use default eMMC 5.1 PHY\n");
> + return add_xenon_phy(np, host, "emmc 5.1 phy");
> +}
> diff --git a/drivers/mmc/host/sdhci-xenon-phy.h b/drivers/mmc/host/sdhci-xenon-phy.h
> new file mode 100644
> index 000000000000..4373c71d3b7b
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-xenon-phy.h
> @@ -0,0 +1,157 @@
> +/* linux/drivers/mmc/host/sdhci-xenon-phy.h
> + *
> + * Author: Hu Ziji <huziji@marvell.com>
> + * Date: 2016-8-24
> + *
> + * Copyright (C) 2016 Marvell, All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or (at
> + * your option) any later version.
> + */
> +#ifndef SDHCI_XENON_PHY_H_
> +#define SDHCI_XENON_PHY_H_
> +
> +#include <linux/types.h>
> +#include "sdhci.h"
> +
> +/* Register base for eMMC PHY 5.0 Version */
> +#define EMMC_5_0_PHY_REG_BASE 0x0160
> +/* Register base for eMMC PHY 5.1 Version */
> +#define EMMC_PHY_REG_BASE 0x0170
> +
> +#define EMMC_PHY_TIMING_ADJUST EMMC_PHY_REG_BASE
> +#define EMMC_5_0_PHY_TIMING_ADJUST EMMC_5_0_PHY_REG_BASE
> +#define TIMING_ADJUST_SLOW_MODE BIT(29)
> +#define TIMING_ADJUST_SDIO_MODE BIT(28)
> +#define OUTPUT_QSN_PHASE_SELECT BIT(17)
> +#define SAMPL_INV_QSP_PHASE_SELECT BIT(18)
> +#define SAMPL_INV_QSP_PHASE_SELECT_SHIFT 18
> +#define PHY_INITIALIZAION BIT(31)
> +#define WAIT_CYCLE_BEFORE_USING_MASK 0xF
> +#define WAIT_CYCLE_BEFORE_USING_SHIFT 12
> +#define FC_SYNC_EN_DURATION_MASK 0xF
> +#define FC_SYNC_EN_DURATION_SHIFT 8
> +#define FC_SYNC_RST_EN_DURATION_MASK 0xF
> +#define FC_SYNC_RST_EN_DURATION_SHIFT 4
> +#define FC_SYNC_RST_DURATION_MASK 0xF
> +#define FC_SYNC_RST_DURATION_SHIFT 0
> +
> +#define EMMC_PHY_FUNC_CONTROL (EMMC_PHY_REG_BASE + 0x4)
> +#define EMMC_5_0_PHY_FUNC_CONTROL (EMMC_5_0_PHY_REG_BASE + 0x4)
> +#define ASYNC_DDRMODE_MASK BIT(23)
> +#define ASYNC_DDRMODE_SHIFT 23
> +#define CMD_DDR_MODE BIT(16)
> +#define DQ_DDR_MODE_SHIFT 8
> +#define DQ_DDR_MODE_MASK 0xFF
> +#define DQ_ASYNC_MODE BIT(4)
> +
> +#define EMMC_PHY_PAD_CONTROL (EMMC_PHY_REG_BASE + 0x8)
> +#define EMMC_5_0_PHY_PAD_CONTROL (EMMC_5_0_PHY_REG_BASE + 0x8)
> +#define REC_EN_SHIFT 24
> +#define REC_EN_MASK 0xF
> +#define FC_DQ_RECEN BIT(24)
> +#define FC_CMD_RECEN BIT(25)
> +#define FC_QSP_RECEN BIT(26)
> +#define FC_QSN_RECEN BIT(27)
> +#define OEN_QSN BIT(28)
> +#define AUTO_RECEN_CTRL BIT(30)
> +#define FC_ALL_CMOS_RECEIVER 0xF000
> +
> +#define EMMC5_FC_QSP_PD BIT(18)
> +#define EMMC5_FC_QSP_PU BIT(22)
> +#define EMMC5_FC_CMD_PD BIT(17)
> +#define EMMC5_FC_CMD_PU BIT(21)
> +#define EMMC5_FC_DQ_PD BIT(16)
> +#define EMMC5_FC_DQ_PU BIT(20)
> +
> +#define EMMC_PHY_PAD_CONTROL1 (EMMC_PHY_REG_BASE + 0xC)
> +#define EMMC5_1_FC_QSP_PD BIT(9)
> +#define EMMC5_1_FC_QSP_PU BIT(25)
> +#define EMMC5_1_FC_CMD_PD BIT(8)
> +#define EMMC5_1_FC_CMD_PU BIT(24)
> +#define EMMC5_1_FC_DQ_PD 0xFF
> +#define EMMC5_1_FC_DQ_PU (0xFF << 16)
> +
> +#define EMMC_PHY_PAD_CONTROL2 (EMMC_PHY_REG_BASE + 0x10)
> +#define EMMC_5_0_PHY_PAD_CONTROL2 (EMMC_5_0_PHY_REG_BASE + 0xC)
> +#define ZNR_MASK 0x1F
> +#define ZNR_SHIFT 8
> +#define ZPR_MASK 0x1F
> +/* Perferred ZNR and ZPR value vary between different boards.
> + * The specific ZNR and ZPR value should be defined here
> + * according to board actual timing.
> + */
> +#define ZNR_DEF_VALUE 0xF
> +#define ZPR_DEF_VALUE 0xF
> +
> +#define EMMC_PHY_DLL_CONTROL (EMMC_PHY_REG_BASE + 0x14)
> +#define EMMC_5_0_PHY_DLL_CONTROL (EMMC_5_0_PHY_REG_BASE + 0x10)
> +#define DLL_ENABLE BIT(31)
> +#define DLL_UPDATE_STROBE_5_0 BIT(30)
> +#define DLL_REFCLK_SEL BIT(30)
> +#define DLL_UPDATE BIT(23)
> +#define DLL_PHSEL1_SHIFT 24
> +#define DLL_PHSEL0_SHIFT 16
> +#define DLL_PHASE_MASK 0x3F
> +#define DLL_PHASE_90_DEGREE 0x1F
> +#define DLL_FAST_LOCK BIT(5)
> +#define DLL_GAIN2X BIT(3)
> +#define DLL_BYPASS_EN BIT(0)
> +
> +#define EMMC_5_0_PHY_LOGIC_TIMING_ADJUST (EMMC_5_0_PHY_REG_BASE + 0x14)
> +#define EMMC_PHY_LOGIC_TIMING_ADJUST (EMMC_PHY_REG_BASE + 0x18)
> +
> +enum sampl_fix_delay_phase {
> + PHASE_0_DEGREE = 0x0,
> + PHASE_90_DEGREE = 0x1,
> + PHASE_180_DEGREE = 0x2,
> + PHASE_270_DEGREE = 0x3,
> +};
> +
> +#define SDH_PHY_SLOT_DLL_CTRL (0x0138)
> +#define SDH_PHY_ENABLE_DLL BIT(1)
> +#define SDH_PHY_FAST_LOCK_EN BIT(5)
> +
> +#define SDH_PHY_SLOT_DLL_PHASE_SEL (0x013C)
> +#define SDH_PHY_DLL_UPDATE_TUNING BIT(15)
> +
> +enum soc_pad_ctrl_type {
> + SOC_PAD_SD,
> + SOC_PAD_FIXED_1_8V,
> +};
> +
> +/*
> + * List offset of PHY registers and some special register values
> + * in eMMC PHY 5.0 or eMMC PHY 5.1
> + */
> +struct xenon_emmc_phy_regs {
> + /* Offset of Timing Adjust register */
> + u16 timing_adj;
> + /* Offset of Func Control register */
> + u16 func_ctrl;
> + /* Offset of Pad Control register */
> + u16 pad_ctrl;
> + /* Offset of Pad Control register */
> + u16 pad_ctrl2;
> + /* Offset of DLL Control register */
> + u16 dll_ctrl;
> + /* Offset of Logic Timing Adjust register */
> + u16 logic_timing_adj;
> + /* Max value of eMMC Fixed Sampling Delay */
> + u32 delay_mask;
> + /* DLL Update Enable bit */
> + u32 dll_update;
> +};
> +
> +struct xenon_phy_ops {
> + void (*strobe_delay_adj)(struct sdhci_host *host,
> + struct mmc_card *card);
> + int (*fix_sampl_delay_adj)(struct sdhci_host *host,
> + struct mmc_card *card);
> + void (*phy_set)(struct sdhci_host *host, unsigned char timing);
> + void (*set_soc_pad)(struct sdhci_host *host,
> + unsigned char signal_voltage);
> +};
> +#endif
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> index 03ba183494d3..4d7d871544fc 100644
> --- a/drivers/mmc/host/sdhci-xenon.c
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -224,6 +224,7 @@ static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> spin_unlock_irqrestore(&host->lock, flags);
>
> sdhci_set_ios(mmc, ios);
> + xenon_phy_adj(host, ios);
>
> if (host->clock > DEFAULT_SDCLK_FREQ) {
> spin_lock_irqsave(&host->lock, flags);
> @@ -309,6 +310,8 @@ static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
> */
> enable_xenon_internal_clk(host);
>
> + xenon_soc_pad_ctrl(host, ios->signal_voltage);
> +
> if (priv->card_candidate) {
> if (mmc_card_mmc(priv->card_candidate))
> return xenon_emmc_signal_voltage_switch(mmc, ios);
> @@ -453,6 +456,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
> sdhci_writel(host, reg, SDHC_SYS_EXT_OP_CTRL);
> }
>
> + err = xenon_phy_parse_dt(np, host);
> return err;
> }
>
> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
> index c2370493fbe8..06e5261a563c 100644
> --- a/drivers/mmc/host/sdhci-xenon.h
> +++ b/drivers/mmc/host/sdhci-xenon.h
> @@ -15,6 +15,7 @@
> #include <linux/mmc/card.h>
> #include <linux/of.h>
> #include "sdhci.h"
> +#include "sdhci-xenon-phy.h"
>
> /* Register Offset of SD Host Controller SOCP self-defined register */
> #define SDHC_SYS_CFG_INFO 0x0104
> @@ -76,6 +77,7 @@
> #define MMC_TIMING_FAKE 0xFF
>
> #define DEFAULT_SDCLK_FREQ (400000)
> +#define LOWEST_SDCLK_FREQ (100000)
>
> /* Xenon specific Mode Select value */
> #define XENON_SDHCI_CTRL_HS200 0x5
> @@ -97,6 +99,15 @@ struct sdhci_xenon_priv {
> /* Slot idx */
> u8 slot_idx;
>
> + int phy_type;
> + /*
> + * Contains board-specific PHY parameters
> + * passed from device tree.
> + */
> + void *phy_params;
> + const struct xenon_phy_ops *phy_ops;
> + struct xenon_emmc_phy_regs *emmc_phy_regs;
> +
> /*
> * When initializing card, Xenon has to determine card type and
> * adjust Sampling Fixed delay.
> @@ -131,4 +142,10 @@ static inline int enable_xenon_internal_clk(struct sdhci_host *host)
>
> return 0;
> }
> +
> +int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
> +int xenon_phy_parse_dt(struct device_node *np,
> + struct sdhci_host *host);
> +void xenon_soc_pad_ctrl(struct sdhci_host *host,
> + unsigned char signal_voltage);
> #endif
>


--
Best Regards
Shawn Lin

\
 
 \ /
  Last update: 2016-10-08 04:46    [W:0.161 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site