lkml.org 
[lkml]   [2016]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/26] cinergyT2-fe: don't do DMA on stack
Date
The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
---
drivers/media/usb/dvb-usb/cinergyT2-fe.c | 45 ++++++++++++++++----------------
1 file changed, 23 insertions(+), 22 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
index fd8edcb56e61..03ba66ef1f28 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
@@ -139,6 +139,9 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op)
struct cinergyt2_fe_state {
struct dvb_frontend fe;
struct dvb_usb_device *d;
+
+ unsigned char data[64];
+
struct dvbt_get_status_msg status;
};

@@ -146,28 +149,28 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
enum fe_status *status)
{
struct cinergyt2_fe_state *state = fe->demodulator_priv;
- struct dvbt_get_status_msg result;
- u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
int ret;

- ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result,
- sizeof(result), 0);
+ state->data[0] = CINERGYT2_EP1_GET_TUNER_STATUS;
+
+ ret = dvb_usb_generic_rw(state->d, state->data, 1,
+ state->data, sizeof(state->status), 0);
if (ret < 0)
return ret;

- state->status = result;
+ memcpy(&state->status, state->data, sizeof(state->status));

*status = 0;

- if (0xffff - le16_to_cpu(result.gain) > 30)
+ if (0xffff - le16_to_cpu(state->status.gain) > 30)
*status |= FE_HAS_SIGNAL;
- if (result.lock_bits & (1 << 6))
+ if (state->status.lock_bits & (1 << 6))
*status |= FE_HAS_LOCK;
- if (result.lock_bits & (1 << 5))
+ if (state->status.lock_bits & (1 << 5))
*status |= FE_HAS_SYNC;
- if (result.lock_bits & (1 << 4))
+ if (state->status.lock_bits & (1 << 4))
*status |= FE_HAS_CARRIER;
- if (result.lock_bits & (1 << 1))
+ if (state->status.lock_bits & (1 << 1))
*status |= FE_HAS_VITERBI;

if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
@@ -232,31 +235,29 @@ static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *fep = &fe->dtv_property_cache;
struct cinergyt2_fe_state *state = fe->demodulator_priv;
- struct dvbt_set_parameters_msg param;
- char result[2];
+ struct dvbt_set_parameters_msg *param = (void *)state->data;
int err;

- param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
- param.tps = cpu_to_le16(compute_tps(fep));
- param.freq = cpu_to_le32(fep->frequency / 1000);
- param.flags = 0;
+ param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
+ param->tps = cpu_to_le16(compute_tps(fep));
+ param->freq = cpu_to_le32(fep->frequency / 1000);
+ param->flags = 0;

switch (fep->bandwidth_hz) {
default:
case 8000000:
- param.bandwidth = 8;
+ param->bandwidth = 8;
break;
case 7000000:
- param.bandwidth = 7;
+ param->bandwidth = 7;
break;
case 6000000:
- param.bandwidth = 6;
+ param->bandwidth = 6;
break;
}

- err = dvb_usb_generic_rw(state->d,
- (char *)&param, sizeof(param),
- result, sizeof(result), 0);
+ err = dvb_usb_generic_rw(state->d, state->data, sizeof(*param),
+ state->data, 2, 0);
if (err < 0)
err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err);

--
2.7.4

\
 
 \ /
  Last update: 2016-10-07 19:25    [W:0.173 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site