Messages in this thread Patch in this message | | | From | Pantelis Antoniou <> | Subject | [PATCH 2/7] mfd: dt-bindings: Add bindings for the Juniper PTX1K Boot FPGA | Date | Fri, 7 Oct 2016 18:21:59 +0300 |
| |
From: Georgi Vlaev <gvlaev@juniper.net>
Add device tree bindings for the Juniper PTX1K Boot FPGA MFD driver.
Signed-off-by: Georgi Vlaev <gvlaev@juniper.net> [Ported from Juniper kernel] Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> --- .../devicetree/bindings/mfd/jnx-ptx1k-bootfpga.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/jnx-ptx1k-bootfpga.txt
diff --git a/Documentation/devicetree/bindings/mfd/jnx-ptx1k-bootfpga.txt b/Documentation/devicetree/bindings/mfd/jnx-ptx1k-bootfpga.txt new file mode 100644 index 0000000..596dec7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/jnx-ptx1k-bootfpga.txt @@ -0,0 +1,34 @@ +* Device tree bindings for Juniper's PTX1K boot FPGA MFD driver + +The device supports a hardware watchdog, a flash MTD device and +a hwmon sensor device. The bindings of those drivers are described +in the jnx-ptx1kbf-wdt, jnx-ptx1kbf-mtd and jnx-ptx1kbf-hwmon documents. + +Required properties: + +- compatible: "ptx1k-bootfpga" + +- reg: contains offset/length value for device state control + registers space. + +Example: + +bootfpga@10000 { + compatible = "jnx,ptx1k-bootfpga"; + reg = <0x10000 0x100>; + + wdt { + compatible = "jnx,ptx1kbf-wdt"; + /* no properties required */ + }; + + mtd { + compatible = "jnx,ptx1kbf-mtd"; + /* use the full device */ + }; + + hwmon { + compatible = "jnx,ptx1kbf-hwmon"; + /* no properties required */ + }; +}; -- 1.9.1
| |