lkml.org 
[lkml]   [2016]   [Oct]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/10] i2c: i2c-mux-ptxpmb-cpld: Add device tree bindings
Date
From: Georgi Vlaev <gvlaev@juniper.net>

Add binding document for the i2c driver of PTXPMB CPLD.

Signed-off-by: Georgi Vlaev <gvlaev@juniper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
---
.../bindings/i2c/jnx,i2c-mux-ptxpmb-cpld.txt | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/jnx,i2c-mux-ptxpmb-cpld.txt

diff --git a/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-ptxpmb-cpld.txt b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-ptxpmb-cpld.txt
new file mode 100644
index 0000000..3b201f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/jnx,i2c-mux-ptxpmb-cpld.txt
@@ -0,0 +1,50 @@
+* Juniper PTXPMB CPLD I2C Mux
+
+I2C mux on the PTXPMB CPLD on Juniper series of routers.
+
+Required properties:
+
+ - compatible: Must contain one of the following.
+ "jnx,i2c-mux-ptxpmb-cpld", "jnx,i2c-mux-ngpmb-bcpld"
+ - num-enable: Number of muxes to enable.
+
+ The following required properties are defined externally:
+
+ - Standard I2C mux properties. See i2c-mux.txt in this directory.
+ - I2C child bus nodes. See i2c-mux.txt in this directory.
+
+Optional Properties:
+
+ - num-channels: Number of channels. If not present the default is 8.
+ - base-bus-num: Base bus number. If not present it is 0.
+ - use-force: Use the force method of the controller.
+
+
+Example:
+
+cpld-i2c-mux {
+ compatible = "jnx,i2c-mux-ptxpmb-cpld";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&i2c1>;
+
+ num-enable = <1>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* PMB devices are accessed through FPC */
+
+ temp-sensor@1a { /* FPC */
+ compatible = "maxim,max6697";
+ reg = <0x1a>;
+ smbus-timeout-disable;
+ resistance-cancellation;
+ alert-mask = <0xff>;
+ over-temperature-mask = <0xff>;
+ };
+ };
+};
--
1.9.1
\
 
 \ /
  Last update: 2016-10-07 17:21    [W:0.106 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site