lkml.org 
[lkml]   [2016]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] staging: vc04_services: setup DMA and coherent mask
From
Date
On Mon, 2016-10-31 at 11:40 -0700, Michael Zoran wrote:
> On Mon, 2016-10-31 at 11:36 -0700, Eric Anholt wrote:
> > Michael Zoran <mzoran@crowfest.net> writes:
> >
> > > Setting the DMA mask is optional on 32 bit but
> > > is mandatory on 64 bit.  Set the DMA mask and coherent
> > > to force all DMA to be in the 32 bit address space.
> > >
> > > This is considered a "good practice" and most drivers
> > > already do this.
> > >
> > > Signed-off-by: Michael Zoran <mzoran@crowfest.net>
> > > ---
> > >  .../staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c |
> > > 10 ++++++++++
> > >  1 file changed, 10 insertions(+)
> > >
> > > diff --git
> > > a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_ar
> > > m.
> > > c
> > > b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_ar
> > > m.
> > > c
> > > index a5afcc5..6fa2b5a 100644
> > > ---
> > > a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_ar
> > > m.
> > > c
> > > +++
> > > b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_ar
> > > m.
> > > c
> > > @@ -97,6 +97,16 @@ int vchiq_platform_init(struct platform_device
> > > *pdev, VCHIQ_STATE_T *state)
> > >   int slot_mem_size, frag_mem_size;
> > >   int err, irq, i;
> > >  
> > > + /*
> > > +  * Setting the DMA mask is necessary in the 64 bit
> > > environment.
> > > +  * It isn't necessary in a 32 bit environment but is
> > > considered
> > > +  * a good practice.
> > > +  */
> > > + err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> >
> > I think a better comment here would be simply:
> >
> > /* VCHI messages between the CPU and firmware use 32-bit bus
> > addresses. */
> >
> > explaining why the value is chosen (once you know that the 32 bit
> > restriction exists, reporting it is obviously needed).  I'm
> > curious,
> > though: what failed when you didn't set it?
> >
>
> The comment is easy to change.
>
> I don't have the log available ATM, but if I remember the DMA API's
> bugcheck the first time that are used.  
>
> I think this was a policy decision or something because the
> information
> should be available in the dma-ranges.
>
> If it's important, I can setup a test again without the change and e-
> mail the logs.
>
> If you look at the DWC2 driver you will see that it also sets this
> mask.

OK, I'm begging to understand this. It appears the architecture
specific paths are very different.

In arm the mask and coherent is set to DMA_BIT_MASK(32) in mm/dma-
mapping.c the first time the dma APIs are used. On arm64, it appears
this variable is uninitialized and will contain random crude.

Like I said, I don't know if this is a policy decision or if it just
slipped through the cracks.

arch/arm/mm/dma-mapping.c(Note the call to get_coherent_dma_mask(dev))

static u64 get_coherent_dma_mask(struct device *dev)
{
u64 mask = (u64)DMA_BIT_MASK(32);

if (dev) {
mask = dev->coherent_dma_mask;

/*
 * Sanity check the DMA mask - it must be non-zero, and
 * must be able to be satisfied by a DMA allocation.
 */
if (mask == 0) {
dev_warn(dev, "coherent DMA mask is unset\n");
return 0;
}

if (!__dma_supported(dev, mask, true))
return 0;
}

return mask;
}

static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t
*handle,
 gfp_t gfp, pgprot_t prot, bool is_coherent,
 unsigned long attrs, const void *caller)
{
u64 mask = get_coherent_dma_mask(dev);
struct page *page = NULL;
void *addr;
bool allowblock, cma;
struct arm_dma_buffer *buf;
struct arm_dma_alloc_args args = {
.dev = dev,
.size = PAGE_ALIGN(size),
.gfp = gfp,
.prot = prot,
.caller = caller,
.want_vaddr = ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) ==
0),
.coherent_flag = is_coherent ? COHERENT : NORMAL,
};

arch/arm64/include/asm/dma-mapping.h

/* do not use this function in a driver */
static inline bool is_device_dma_coherent(struct device *dev)
{
if (!dev)
return false;
return dev->archdata.dma_coherent;
}

arch/arm64/mm/dma-mapping.c(Note no call to get_coherent_dma_mask)

static void *__dma_alloc(struct device *dev, size_t size,
 dma_addr_t *dma_handle, gfp_t flags,
 unsigned long attrs)
{
struct page *page;
void *ptr, *coherent_ptr;
bool coherent = is_device_dma_coherent(dev);
pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL, false);

size = PAGE_ALIGN(size);

if (!coherent && !gfpflags_allow_blocking(flags)) {
struct page *page = NULL;
void *addr = __alloc_from_pool(size, &page, flags);

if (addr)
*dma_handle = phys_to_dma(dev,
page_to_phys(page));

return addr;
}

ptr = __dma_alloc_coherent(dev, size, dma_handle, flags,
attrs);

\
 
 \ /
  Last update: 2016-10-31 20:53    [W:0.050 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site