lkml.org 
[lkml]   [2016]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] ARM: bcm2835: Add names for the Raspberry Pi GPIO lines

> Eric Anholt <eric@anholt.net> hat am 31. Oktober 2016 um 18:53 geschrieben:
>
>
> Stefan Wahren <stefan.wahren@i2se.com> writes:
>
> > Hi Eric,
> >
> >> Eric Anholt <eric@anholt.net> hat am 27. Oktober 2016 um 18:52 geschrieben:
> >>
> >>
> >> From: Linus Walleij <linus.walleij@linaro.org>
> >>
> >> The idea is to give useful names to GPIO lines that an implementer
> >> will be using from userspace, e.g. for maker type projects. These are
> >> user-visible using tools/gpio/lsgpio.c
> >
> > sorry for the late feedback, but did you check your patch against the
> > Firmware
> > DTS [1]?
> >
> > As an example the GPIO38 is connected and named as USB_LIMIT_1A2 since
> > Raspberry
> > Pi 1 B Plus.
> >
> > [1] -
> > https://github.com/raspberrypi/documentation/blob/master/configuration/images/dt-blob.dts
>
> I did use the dt-blob sometimes for cross-checking, but these are
> written against the schematics, not the dt-blob. If you've got things
> you'd like changed, could you send a patch?

A patch against your v3 or my own v4 based on your patch?

\
 
 \ /
  Last update: 2016-10-31 19:02    [W:0.042 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site