lkml.org 
[lkml]   [2016]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 4/4] MIPS: Correct MIPS I FP sigcontext layout
Complement commit 80cbfad79096 ("MIPS: Correct MIPS I FP context 
layout") and correct the way Floating Point General registers are stored
in a signal context with MIPS I hardware.

Use the S.D and L.D assembly macros to have pairs of SWC1 instructions
and pairs of LWC1 instructions produced, respectively, in an arrangement
which makes the memory representation of floating-point data passed
compatible with that used by hardware SDC1 and LDC1 instructions, where
available, regardless of the hardware endianness used. This matches the
layout used by r4k_fpu.S, ensuring run-time compatibility for MIPS I
software across all o32 hardware platforms.

Define an EX2 macro to handle exceptions from both hardware instructions
implicitly produced from S.D and L.D assembly macros.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
---
linux-mips-isa1-sig-fp-context.patch
Index: linux-sfr-test/arch/mips/kernel/r2300_fpu.S
===================================================================
--- linux-sfr-test.orig/arch/mips/kernel/r2300_fpu.S 2016-10-22 02:38:03.979547000 +0100
+++ linux-sfr-test/arch/mips/kernel/r2300_fpu.S 2016-10-22 02:41:53.059507000 +0100
@@ -24,6 +24,13 @@
PTR 9b,fault; \
.previous

+#define EX2(a,b) \
+9: a,##b; \
+ .section __ex_table,"a"; \
+ PTR 9b,bad_stack; \
+ PTR 9b+4,bad_stack; \
+ .previous
+
.set noreorder
.set mips1

@@ -40,38 +47,22 @@ LEAF(_save_fp_context)
SET_HARDFLOAT
li v0, 0 # assume success
cfc1 t1, fcr31
- EX(swc1 $f0, 0(a0))
- EX(swc1 $f1, 8(a0))
- EX(swc1 $f2, 16(a0))
- EX(swc1 $f3, 24(a0))
- EX(swc1 $f4, 32(a0))
- EX(swc1 $f5, 40(a0))
- EX(swc1 $f6, 48(a0))
- EX(swc1 $f7, 56(a0))
- EX(swc1 $f8, 64(a0))
- EX(swc1 $f9, 72(a0))
- EX(swc1 $f10, 80(a0))
- EX(swc1 $f11, 88(a0))
- EX(swc1 $f12, 96(a0))
- EX(swc1 $f13, 104(a0))
- EX(swc1 $f14, 112(a0))
- EX(swc1 $f15, 120(a0))
- EX(swc1 $f16, 128(a0))
- EX(swc1 $f17, 136(a0))
- EX(swc1 $f18, 144(a0))
- EX(swc1 $f19, 152(a0))
- EX(swc1 $f20, 160(a0))
- EX(swc1 $f21, 168(a0))
- EX(swc1 $f22, 176(a0))
- EX(swc1 $f23, 184(a0))
- EX(swc1 $f24, 192(a0))
- EX(swc1 $f25, 200(a0))
- EX(swc1 $f26, 208(a0))
- EX(swc1 $f27, 216(a0))
- EX(swc1 $f28, 224(a0))
- EX(swc1 $f29, 232(a0))
- EX(swc1 $f30, 240(a0))
- EX(swc1 $f31, 248(a0))
+ EX2(s.d $f0, 0(a0))
+ EX2(s.d $f2, 16(a0))
+ EX2(s.d $f4, 32(a0))
+ EX2(s.d $f6, 48(a0))
+ EX2(s.d $f8, 64(a0))
+ EX2(s.d $f10, 80(a0))
+ EX2(s.d $f12, 96(a0))
+ EX2(s.d $f14, 112(a0))
+ EX2(s.d $f16, 128(a0))
+ EX2(s.d $f18, 144(a0))
+ EX2(s.d $f20, 160(a0))
+ EX2(s.d $f22, 176(a0))
+ EX2(s.d $f24, 192(a0))
+ EX2(s.d $f26, 208(a0))
+ EX2(s.d $f28, 224(a0))
+ EX2(s.d $f30, 240(a0))
jr ra
EX(sw t1, (a1))
.set pop
@@ -90,38 +81,22 @@ LEAF(_restore_fp_context)
SET_HARDFLOAT
li v0, 0 # assume success
EX(lw t0, (a1))
- EX(lwc1 $f0, 0(a0))
- EX(lwc1 $f1, 8(a0))
- EX(lwc1 $f2, 16(a0))
- EX(lwc1 $f3, 24(a0))
- EX(lwc1 $f4, 32(a0))
- EX(lwc1 $f5, 40(a0))
- EX(lwc1 $f6, 48(a0))
- EX(lwc1 $f7, 56(a0))
- EX(lwc1 $f8, 64(a0))
- EX(lwc1 $f9, 72(a0))
- EX(lwc1 $f10, 80(a0))
- EX(lwc1 $f11, 88(a0))
- EX(lwc1 $f12, 96(a0))
- EX(lwc1 $f13, 104(a0))
- EX(lwc1 $f14, 112(a0))
- EX(lwc1 $f15, 120(a0))
- EX(lwc1 $f16, 128(a0))
- EX(lwc1 $f17, 136(a0))
- EX(lwc1 $f18, 144(a0))
- EX(lwc1 $f19, 152(a0))
- EX(lwc1 $f20, 160(a0))
- EX(lwc1 $f21, 168(a0))
- EX(lwc1 $f22, 176(a0))
- EX(lwc1 $f23, 184(a0))
- EX(lwc1 $f24, 192(a0))
- EX(lwc1 $f25, 200(a0))
- EX(lwc1 $f26, 208(a0))
- EX(lwc1 $f27, 216(a0))
- EX(lwc1 $f28, 224(a0))
- EX(lwc1 $f29, 232(a0))
- EX(lwc1 $f30, 240(a0))
- EX(lwc1 $f31, 248(a0))
+ EX2(l.d $f0, 0(a0))
+ EX2(l.d $f2, 16(a0))
+ EX2(l.d $f4, 32(a0))
+ EX2(l.d $f6, 48(a0))
+ EX2(l.d $f8, 64(a0))
+ EX2(l.d $f10, 80(a0))
+ EX2(l.d $f12, 96(a0))
+ EX2(l.d $f14, 112(a0))
+ EX2(l.d $f16, 128(a0))
+ EX2(l.d $f18, 144(a0))
+ EX2(l.d $f20, 160(a0))
+ EX2(l.d $f22, 176(a0))
+ EX2(l.d $f24, 192(a0))
+ EX2(l.d $f26, 208(a0))
+ EX2(l.d $f28, 224(a0))
+ EX2(l.d $f30, 240(a0))
jr ra
ctc1 t0, fcr31
.set pop
\
 
 \ /
  Last update: 2016-10-31 17:28    [W:0.251 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site