lkml.org 
[lkml]   [2016]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] ARM: bus: da8xx-mstpri: new driver
2016-10-31 10:52 GMT+01:00 Sekhar Nori <nsekhar@ti.com>:
> Hi Bartosz,
>
> On Monday 31 October 2016 03:10 PM, Bartosz Golaszewski wrote:
>> 2016-10-31 5:30 GMT+01:00 Rob Herring <robh@kernel.org>:
>>> On Wed, Oct 26, 2016 at 07:35:55PM +0200, Bartosz Golaszewski wrote:
>>>> Create the driver for the da8xx master peripheral priority
>>>> configuration and implement support for writing to the three
>>>> Master Priority registers on da850 SoCs.
>>>>
>>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>> ---
>>>> .../devicetree/bindings/bus/ti,da850-mstpri.txt | 20 ++
>>>> drivers/bus/Kconfig | 9 +
>>>> drivers/bus/Makefile | 2 +
>>>> drivers/bus/da8xx-mstpri.c | 266 +++++++++++++++++++++
>>>> 4 files changed, 297 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
>>>> create mode 100644 drivers/bus/da8xx-mstpri.c
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
>>>> new file mode 100644
>>>> index 0000000..225af09
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
>>>> @@ -0,0 +1,20 @@
>>>> +* Device tree bindings for Texas Instruments da8xx master peripheral
>>>> + priority driver
>>>> +
>>>> +DA8XX SoCs feature a set of registers allowing to change the priority of all
>>>> +peripherals classified as masters.
>>>> +
>>>> +Documentation:
>>>> +OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
>>>> +
>>>> +Required properties:
>>>> +
>>>> +- compatible: "ti,da850-mstpri", "syscon" - for da850 based boards
>>>
>>> Drop syscon. Doesn't look like it is needed and the example doesn't
>>> match.
>>
>> Hi Rob,
>>
>> it is needed: syscon_regmap_lookup_by_compatible() fails without it. I
>> fixed the example instead.
>
> Why are master priority registers under syscon? This driver should be
> the only entity touching them. So do we need an MFD driver?
>

It should, but syscfg0 registers are mapped all over the place. I
thought it would be safer to put them under syscon and Kevin agreed.

Thanks,
Bartosz Golaszewski

\
 
 \ /
  Last update: 2016-10-31 10:55    [W:0.138 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site