lkml.org 
[lkml]   [2016]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] g_NCR5380: Test the IRQ before accepting it

On Sun, 30 Oct 2016, Ondrej Zary wrote:

> Trigger an IRQ first with a test IRQ handler to find out if it really
> works. Disable the IRQ if not.
>
> This prevents hang when incorrect IRQ was specified by user.
>
> Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
> ---
> drivers/scsi/g_NCR5380.c | 32 ++++++++++++++++++++++++++++++--
> 1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index 3790ed5..261e168 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -67,6 +67,14 @@
> MODULE_ALIAS("g_NCR5380_mmio");
> MODULE_LICENSE("GPL");
>
> +static bool irq_working;
> +
> +static irqreturn_t test_irq(int irq, void *dev_id)
> +{
> + irq_working = true;
> + return IRQ_HANDLED;
> +}
> +
> /*
> * Configure I/O address of 53C400A or DTC436 by writing magic numbers
> * to ports 0x779 and 0x379.
> @@ -275,10 +283,30 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
> /* set IRQ for HP C2502 */
> if (board == BOARD_HP_C2502)
> magic_configure(port_idx, instance->irq, magic);
> - if (request_irq(instance->irq, generic_NCR5380_intr,
> - 0, "NCR5380", instance)) {
> + /* test if the IRQ is working */
> + irq_working = false;
> + if (request_irq(instance->irq, test_irq,
> + 0, "NCR5380-irqtest", NULL)) {
> printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
> instance->irq = NO_IRQ;
> + } else {
> + NCR5380_trigger_irq(instance);
> + NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> + free_irq(instance->irq, NULL);
> + if (irq_working) {
> + if (request_irq(instance->irq,
> + generic_NCR5380_intr, 0,
> + "NCR5380", instance)) {
> + printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n",
> + instance->host_no,
> + instance->irq);
> + instance->irq = NO_IRQ;
> + }
> + } else {
> + printk(KERN_WARNING "scsi%d : IRQ%d not working, interrupts disabled\n",
> + instance->host_no, instance->irq);
> + instance->irq = NO_IRQ;
> + }
> }
> }
>
>

If the user omits to specify an irq, you can just default to IRQ_AUTO.
This might result in NO_IRQ, which gives the same result as this patch.

And when the user does specify an IRQ, we should trust them. So this
compexity doesn't add any value AFAICT. Thanks but no thanks.

--

\
 
 \ /
  Last update: 2016-10-31 04:10    [W:0.087 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site