lkml.org 
[lkml]   [2016]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] Documentation: synopsys-dw-mshc: add binding for reset-names
Date
Add reset-names property for binding dw-mmc controller.
It might be used together with "reset" property.
- Note: It must be "reset" as name.

Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller")

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---
Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
index 4e00e85..bfa461a 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@@ -43,6 +43,9 @@ Optional properties:
reset signal present internally in some host controller IC designs.
See Documentation/devicetree/bindings/reset/reset.txt for details.

+* reset-names: request name for using "resets" property. Must be "reset".
+ (It will be used together with "resets" property.)
+
* clocks: from common clock binding: handle to biu and ciu clocks for the
bus interface unit clock and the card interface unit clock.

@@ -103,6 +106,8 @@ board specific portions as listed below.
interrupts = <0 75 0>;
#address-cells = <1>;
#size-cells = <0>;
+ resets = <&rst 20>;
+ reset-names = "reset";
};

[board specific internal DMA resources]
--
2.10.1
\
 
 \ /
  Last update: 2016-10-31 03:51    [W:0.081 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site