lkml.org 
[lkml]   [2016]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH 3/3] net: smsc911x: add u16 workaround for pxa platforms
    From
    Date
    Hi Robert,

    On 10/03/2016 04:05 AM, Robert Jarzmik wrote:
    > Add a workaround for mainstone, idp and stargate2 boards, for u16 writes
    > which must be aligned on 32 bits addresses.
    >
    > Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
    > ---
    > Documentation/devicetree/bindings/net/smsc911x.txt | 2 ++
    > 1 file changed, 2 insertions(+)

    I think this might be the wrong doc file. I think you want the
    smsc-lan91c111.txt file.


    Thanks,

    >
    > diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt
    > index 3fed3c124411..224965b7453c 100644
    > --- a/Documentation/devicetree/bindings/net/smsc911x.txt
    > +++ b/Documentation/devicetree/bindings/net/smsc911x.txt
    > @@ -13,6 +13,8 @@ Optional properties:
    > - reg-io-width : Specify the size (in bytes) of the IO accesses that
    > should be performed on the device. Valid value for SMSC LAN is
    > 2 or 4. If it's omitted or invalid, the size would be 2.
    > +- reg-u16-align4 : Boolean, put in place the workaround the force all
    > + u16 writes to be 32 bits aligned
    > - smsc,irq-active-high : Indicates the IRQ polarity is active-high
    > - smsc,irq-push-pull : Indicates the IRQ type is push-pull
    > - smsc,force-internal-phy : Forces SMSC LAN controller to use
    >

    \
     
     \ /
      Last update: 2016-10-03 17:22    [W:4.888 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site