lkml.org 
[lkml]   [2016]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] ARM: dts: sun8i: Add SPI pinctrl node in H3
Date
H3 supports two SPI controllers. Four pins (MOSI, MISO, SCLK, SS) are
configured through the pinctrl subsystem.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 75a8654..8a59d8d 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -381,6 +381,20 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};

+ spi0_pins: spi0 {
+ allwinner,pins = "PC0", "PC1", "PC2", "PC3";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi1_pins: spi1 {
+ allwinner,pins = "PA15", "PA16", "PA14", "PA13";
+ allwinner,function = "spi1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
uart0_pins_a: uart0@0 {
allwinner,pins = "PA4", "PA5";
allwinner,function = "uart0";
--
2.9.3
\
 
 \ /
  Last update: 2016-10-28 08:55    [W:0.087 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site