lkml.org 
[lkml]   [2016]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/4] Input: goodix - Allow tweaking of configuration file dynamically
From
Date
On Thu, 2016-10-27 at 11:58 -0500, Franklin S Cooper Jr wrote:
>
> On 10/27/2016 05:33 AM, Bastien Nocera wrote:
> > On Thu, 2016-10-20 at 14:59 -0500, Franklin S Cooper Jr wrote:
> > > Some goodix touchscreen controllers don't have the correct
> > > configuration
> > > firmware for the display panel it is attached to. Therefore,
> > > settings
> > > such
> > > as touchscreen x and y size may need to be passed in via DT and
> > > have
> > > the
> > > panel reprogrammed for the updated touchscreen resolution.
> > >
> > > This patchset adds support for reading the current configuration
> > > firmware
> > > on the panel and allowing it to be modified and rewritten back to
> > > the
> > > device.
> > >
> > > Currently this function is unused but later patches will make use
> > > of
> > > it.
> > >
> > > Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
> > > ---
> > >  drivers/input/touchscreen/goodix.c | 28
> > > ++++++++++++++++++++++++++++
> > >  1 file changed, 28 insertions(+)
> > >
> > > diff --git a/drivers/input/touchscreen/goodix.c
> > > b/drivers/input/touchscreen/goodix.c
> > > index a43c8ca..01e12f8 100644
> > > --- a/drivers/input/touchscreen/goodix.c
> > > +++ b/drivers/input/touchscreen/goodix.c
> > > @@ -478,6 +478,34 @@ static int goodix_get_gpio_config(struct
> > > goodix_ts_data *ts)
> > >   return 0;
> > >  }
> > >  
> > > +static void goodix_tweak_config(struct goodix_ts_data *ts)
> > > +{
> > > + u8 config[GOODIX_CONFIG_MAX_LENGTH];
> > > + int error;
> > > + int raw_cfg_len;
> > > + u8 check_sum = 0;
> > > +
> > > + raw_cfg_len = ts->cfg_len - 2;
> > > +
> > > + error = goodix_i2c_read(ts->client,
> > > GOODIX_REG_CONFIG_DATA,
> > > + config, ts->cfg_len);
> > > + if (error) {
> > > + dev_warn(&ts->client->dev,
> > > +  "Error reading config (%d), avoid
> > > tweaking
> > > config\n",
> > > +  error);
> > > + return;
> > > + }
> >
> > Please add a placeholder comment here, to go along with the commit
> > message explanation.
>
> You just want a comment here stating that changes to the firmware
> should
> be made here?

Yes, at least for this intermediary patch. You can remove in in
subsequent patches when it's clearer that this is where things go.

> > > + check_sum = goodix_calculate_checksum(ts->cfg_len,
> > > config);
> > > +
> > > + config[raw_cfg_len] = check_sum;
> > > + config[raw_cfg_len + 1] = 1;
> > > +
> > > + error = goodix_send_cfg(ts, ts->cfg_len, config);
> > > + if (error)
> > > + dev_warn(&ts->client->dev,
> > > +  "Error writing config (%d)\n", error);
> > > +}
> > >  /**
> > >   * goodix_read_config - Read the embedded configuration of the
> > > panel
> > >   *

\
 
 \ /
  Last update: 2016-10-27 19:43    [W:0.047 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site