Messages in this thread Patch in this message | | | From | Ed Blake <> | Subject | [PATCH 2/2] serial: 8250_dw: Add support for IrDA SIR mode | Date | Thu, 27 Oct 2016 17:38:06 +0100 |
| |
Add a set_ldisc function to enable/disable IrDA SIR mode according to the new line discipline.
Signed-off-by: Ed Blake <ed.blake@imgtec.com> --- drivers/tty/serial/8250/8250_dw.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 459d726..7dd5369 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -53,6 +53,8 @@ /* Helper for fifo size calculation */ #define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16) +/* DesignWare specific register fields */ +#define DW_UART_MCR_SIRE BIT(6) struct dw8250_data { u8 usr_reg; @@ -254,6 +256,20 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, serial8250_do_set_termios(p, termios, old); } +static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios) +{ + unsigned int mcr = p->serial_in(p, UART_MCR); + + if (termios->c_line == N_IRDA) + mcr |= DW_UART_MCR_SIRE; + else + mcr &= ~DW_UART_MCR_SIRE; + + p->serial_out(p, UART_MCR, mcr); + + serial8250_do_set_ldisc(p, termios); +} + /* * dw8250_fallback_dma_filter will prevent the UART from getting just any free * channel on platforms that have DMA engines, but don't have any channels @@ -392,6 +408,7 @@ static int dw8250_probe(struct platform_device *pdev) p->iotype = UPIO_MEM; p->serial_in = dw8250_serial_in; p->serial_out = dw8250_serial_out; + p->set_ldisc = dw8250_set_ldisc; p->membase = devm_ioremap(dev, regs->start, resource_size(regs)); if (!p->membase) -- 1.9.1
| |