lkml.org 
[lkml]   [2016]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: console issue since 3.6, console=ttyS1 hangs
On Fri, Oct 21, 2016 at 10:55:40AM -0500, Nathan Zimmer wrote:
> It didn't seem to make a difference as far as output.
> Did I miss a config option? or something else?
>
> [ 0.000000] Linux version 3.6.0 (root@r1i2n0) (gcc version 4.3.4
> [gcc-4_3-branch revision 152973] (SUSE Linux) ) #3 SMP Mon Oct 17 20:43:34
> EDT 2016
> [ 0.000000] Command line:
> root=/dev/disk/by-id/ata-WDC_WD5000BHTZ-04JCPV1_WD-WXA1E54KKR60-part2
> resume=/dev/disk/by-id/ata-WDC_WD5000BHTZ-04JCPV1_WD-WXA1E54KKR60-part1
> crashkernel=256M-:128M loglevel=8 pnp.debug=1
> ...
> [ 2.076084] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
> [ 2.097001] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 2.097844] serial 00:04: unable to assign resources
> [ 2.098303] serial: probe of 00:04 failed with error -16

Ehm is this kernel compiled with CONFIG_PNP_DEBUG_MESSAGES? Are you
getting any debug messages? You could try ignore_loglevel.


Sean

\
 
 \ /
  Last update: 2016-10-24 15:53    [W:0.095 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site