lkml.org 
[lkml]   [2016]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 6/7] dt-bindings: iio: document envelope-detector bindings
From
Date
On 2016-10-23 00:43, Peter Rosin wrote:
> Signed-off-by: Peter Rosin <peda@axentia.se>
> ---
> .../bindings/iio/adc/envelope-detector.txt | 55 ++++++++++++++++++++++
> MAINTAINERS | 6 +++
> 2 files changed, 61 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
> new file mode 100644
> index 000000000000..9099531cffff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
> @@ -0,0 +1,55 @@
> +Bindings for ADC envelope detector using a DAC and a comparator
> +
> +The DAC is used to find the peak level of an alternating voltage input
> +signal by a binary search using the output of a comparator wired to
> +an interrupt pin. Like so:
> + _
> + | \
> + input +------>-------|+ \
> + | \
> + .-------. | }---.
> + | | | / |
> + | dac|-->--|- / |
> + | | |_/ |
> + | | |
> + | | |
> + | irq|------<-------'
> + | |
> + '-------'
> +
> +Required properties:
> +- compatible: Should be "axentia,tse850-envelope-detector"
> +- io-channels: Channel node of the dac to be used for comparator input.
> +- io-channel-names: Should be "dac".
> +- interrupt specification for one client interrupt,
> + see ../../interrupt-controller/interrupts.txt for details.
> +- interrupt-names: Should be "comp".
> +
> +Example:
> +
> + &i2c {
> + dpot: mcp4651-104@28 {
> + compatible = "microchip,mcp4651-104";
> + reg = <0x28>;
> + #io-channel-cells = <1>;
> + };
> + };
> +
> + dac: dac {
> + compatible = "dpot-dac";
> + vref-supply = <&reg_3v3>;
> + io-channels = <&dpot 0>;
> + io-channel-names = "dpot";
> + dpot-dac,max-ohms = <100000>;

Just noticed that this line isn't needed anymore. I'll kill it for v3.

Cheers,
Peter

> + #io-channel-cells = <1>;
> + };
> +
> + envelope-detector {
> + compatible = "axentia,tse850-envelope-detector";
> + io-channels = <&dac 0>;
> + io-channel-names = "dac";
> +
> + interrupt-parent = <&gpio>;
> + interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-names = "comp";
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8c8aae24b96b..4b6f6ec1b703 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6118,6 +6118,12 @@ S: Maintained
> F: Documentation/devicetree/bindings/iio/dac/dpot-dac.txt
> F: drivers/iio/dac/dpot-dac.c
>
> +IIO ENVELOPE DETECTOR
> +M: Peter Rosin <peda@axentia.se>
> +L: linux-iio@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
> +
> IIO SUBSYSTEM AND DRIVERS
> M: Jonathan Cameron <jic23@kernel.org>
> R: Hartmut Knaack <knaack.h@gmx.de>
>

\
 
 \ /
  Last update: 2016-10-23 13:34    [W:0.124 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site