lkml.org 
[lkml]   [2016]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/7] iio:core: add a callback to allow drivers to provide _available attributes
From
Date
On 2016-10-23 11:33, Jonathan Cameron wrote:
> On 22/10/16 23:43, Peter Rosin wrote:
>> From: Jonathan Cameron <jic23@kernel.org>
>>
>> A large number of attributes can only take a limited range of values.
>> Currently in IIO this is handled by directly registering additional
>> *_available attributes thus providing this information to userspace.
>>
>> It is desirable to provide this information via the core for much the same
>> reason this was done for the actual channel information attributes in the
>> first place. If it isn't there, then it can only really be accessed from
>> userspace. Other in kernel IIO consumers have no access to what valid
>> parameters are.
>>
>> Two forms are currently supported:
>> * list of values in one particular IIO_VAL_* format.
>> e.g. 1.300000 1.500000 1.730000
>> * range specification with a step size:
>> e.g. [1.000000 0.500000 2.500000]
>> equivalent to 1.000000 1.5000000 2.000000 2.500000
>>
>> An addition set of masks are used to allow different sharing rules for the
>> *_available attributes generated.
>>
>> This allows for example:
>>
>> in_accel_x_offset
>> in_accel_y_offset
>> in_accel_offset_available.
>>
>> We could have gone with having a specification for each and every
>> info_mask element but that would have meant changing the existing userspace
>> ABI. This approach does not.
> I'm wondering what I meant by this... where does it cause use ABI issues?
> Do you have any idea?

Nope, sorry. My memory is probably just as blank as yours :-)

> I'd forgotten I'd even done it like this rather than just insisting on
> available for everything (which is more logical to me as we should know
> the range of everything).
>
> It's pretty low cost though and gives a way of adding this to drivers
> piecemeal which is probably a good idea!

Yes, that's always a good sign. Flag days are a pain.

>> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
>> [rather mindlessly forward ported from approx 3 years ago /peda]
> More importantly shepherding it through review!
>
> Naturally it's perfect code so not comments inline ;)
>
> Thanks again for picking this up!
>
> So... I want to see lots of comments on this. If people are happy with
> it (unlikely ;) then please say so. It's at least a bit controversial

Hmmm, maybe I should looking over the changes line-by-line, see inline
comments...

> and adds a 'lot' of new ABI.

I'd appreciate it if someone else wrote up the common stuff in the
testing/sysfs-bus/iio file. That file is a jungle to a newcomer...

> Jonathan
>> Signed-off-by: Peter Rosin <peda@axentia.se>
>> ---
>> drivers/iio/industrialio-core.c | 232 +++++++++++++++++++++++++++++++++++-----
>> include/linux/iio/iio.h | 11 ++
>> include/linux/iio/types.h | 5 +
>> 3 files changed, 223 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
>> index fc340ed3dca1..93c69ebeda1e 100644
>> --- a/drivers/iio/industrialio-core.c
>> +++ b/drivers/iio/industrialio-core.c
>> @@ -575,51 +575,41 @@ int of_iio_read_mount_matrix(const struct device *dev,
>> #endif
>> EXPORT_SYMBOL(of_iio_read_mount_matrix);
>>
>> -/**
>> - * iio_format_value() - Formats a IIO value into its string representation
>> - * @buf: The buffer to which the formatted value gets written
>> - * @type: One of the IIO_VAL_... constants. This decides how the val
>> - * and val2 parameters are formatted.
>> - * @size: Number of IIO value entries contained in vals
>> - * @vals: Pointer to the values, exact meaning depends on the
>> - * type parameter.
>> - *
>> - * Return: 0 by default, a negative number on failure or the
>> - * total number of characters written for a type that belongs
>> - * to the IIO_VAL_... constant.
>> - */
>> -ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals)
>> +static ssize_t __iio_format_value(char *buf, unsigned int type,
>> + int size, const int *vals)
>> {
>> unsigned long long tmp;
>> + int tmp0, tmp1;
>> bool scale_db = false;
>>
>> switch (type) {
>> case IIO_VAL_INT:
>> - return sprintf(buf, "%d\n", vals[0]);
>> + return sprintf(buf, "%d", vals[0]);

This function was previously used to format one or a perhaps a few
values presumable at the start of a page. It doesn't bother to check
for buffer overflow. That is probably very bad now that it is used
to print arbitrary length lists of values...

I'll add a suggested fix in v3.

>> case IIO_VAL_INT_PLUS_MICRO_DB:
>> scale_db = true;
>> case IIO_VAL_INT_PLUS_MICRO:
>> if (vals[1] < 0)
>> - return sprintf(buf, "-%d.%06u%s\n", abs(vals[0]),
>> + return sprintf(buf, "-%d.%06u%s", abs(vals[0]),
>> -vals[1], scale_db ? " dB" : "");
>> else
>> - return sprintf(buf, "%d.%06u%s\n", vals[0], vals[1],
>> + return sprintf(buf, "%d.%06u%s", vals[0], vals[1],
>> scale_db ? " dB" : "");
>> case IIO_VAL_INT_PLUS_NANO:
>> if (vals[1] < 0)
>> - return sprintf(buf, "-%d.%09u\n", abs(vals[0]),
>> + return sprintf(buf, "-%d.%09u", abs(vals[0]),
>> -vals[1]);
>> else
>> - return sprintf(buf, "%d.%09u\n", vals[0], vals[1]);
>> + return sprintf(buf, "%d.%09u", vals[0], vals[1]);
>> case IIO_VAL_FRACTIONAL:
>> tmp = div_s64((s64)vals[0] * 1000000000LL, vals[1]);
>> - vals[0] = (int)div_s64_rem(tmp, 1000000000, &vals[1]);
>> - return sprintf(buf, "%d.%09u\n", vals[0], abs(vals[1]));
>> + tmp1 = vals[1];
>> + tmp0 = (int)div_s64_rem(tmp, 1000000000, &tmp1);
>> + return sprintf(buf, "%d.%09u", tmp0, abs(tmp1));
>> case IIO_VAL_FRACTIONAL_LOG2:
>> tmp = (s64)vals[0] * 1000000000LL >> vals[1];
>> - vals[1] = do_div(tmp, 1000000000LL);
>> - vals[0] = tmp;
>> - return sprintf(buf, "%d.%09u\n", vals[0], vals[1]);
>> + tmp1 = do_div(tmp, 1000000000LL);
>> + tmp0 = tmp;
>> + return sprintf(buf, "%d.%09u", tmp0, tmp1);
>> case IIO_VAL_INT_MULTIPLE:
>> {
>> int i;
>> @@ -628,13 +618,34 @@ ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals)
>> for (i = 0; i < size; ++i)
>> len += snprintf(&buf[len], PAGE_SIZE - len, "%d ",
>> vals[i]);

This seems like a dangerous thing to do, arg 2 of snprintf is size_t which
is unsigned, so if one call would have overflowed the buffer, the next
will see a negative available buffer, turned very large since unsigned.
*boom*

I'll add a suggested fix in v3.

>> - len += snprintf(&buf[len], PAGE_SIZE - len, "\n");
>> return len;
>> }
>> default:
>> return 0;
>> }
>> }
>> +
>> +/**
>> + * iio_format_value() - Formats a IIO value into its string representation
>> + * @buf: The buffer to which the formatted value gets written
>> + * @type: One of the IIO_VAL_... constants. This decides how the val
>> + * and val2 parameters are formatted.
>> + * @size: Number of IIO value entries contained in vals
>> + * @vals: Pointer to the values, exact meaning depends on the
>> + * type parameter.
>> + *
>> + * Return: 0 by default, a negative number on failure or the
>> + * total number of characters written for a type that belongs
>> + * to the IIO_VAL_... constant.
>> + */
>> +ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals)
>> +{
>> + ssize_t len;
>> +
>> + len = __iio_format_value(buf, type, size, vals);
>> +
>> + return len + sprintf(buf + len, "\n");
>> +}
>> EXPORT_SYMBOL_GPL(iio_format_value);
>>
>> static ssize_t iio_read_channel_info(struct device *dev,
>> @@ -662,6 +673,113 @@ static ssize_t iio_read_channel_info(struct device *dev,
>> return iio_format_value(buf, ret, val_len, vals);
>> }
>>
>> +static ssize_t iio_format_avail_list(char *buf, const int *vals,
>> + int type, int length)
>> +{
>> + int i;
>> + ssize_t len = 0;
>> +
>> + switch (type) {
>> + case IIO_VAL_INT:
>> + for (i = 0; i < length; i++) {
>> + len += __iio_format_value(buf + len, type, 1, &vals[i]);
>> + if (i < length - 1)
>> + len += snprintf(buf + len,
>> + PAGE_SIZE - len,
>> + " ");
>> + else
>> + len += snprintf(buf + len,
>> + PAGE_SIZE - len,
>> + "\n");
>> + }
>> + break;
>> + default:
>> + for (i = 0; i < length / 2; i++) {
>> + len += __iio_format_value(buf + len,
>> + type,
>> + 2,
>> + &vals[i * 2]);
>> + if (i < length / 2 - 1)
>> + len += snprintf(buf + len,
>> + PAGE_SIZE - len,
>> + " ");
>> + else
>> + len += snprintf(buf + len,
>> + PAGE_SIZE - len,
>> + "\n");
>> + }
>> + };
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t iio_format_avail_range(char *buf, const int *vals, int type)
>> +{
>> + int i;
>> + ssize_t len;
>> +
>> + len = snprintf(buf, PAGE_SIZE, "[");
>> + switch (type) {
>> + case IIO_VAL_INT:
>> + for (i = 0; i < 3; i++) {
>> + len += __iio_format_value(buf + len, type, 1, &vals[i]);
>> + if (i < 2)
>> + len += snprintf(buf + len,
>> + PAGE_SIZE - len,
>> + " ");
>> + else
>> + len += snprintf(buf + len,
>> + PAGE_SIZE - len,
>> + "]\n");
>> + }
>> + break;
>> + default:
>> + for (i = 0; i < 3; i++) {
>> + len += __iio_format_value(buf + len,
>> + type,
>> + 2,
>> + &vals[i * 2]);
>> + if (i < 2)
>> + len += snprintf(buf + len,
>> + PAGE_SIZE - len,
>> + " ");
>> + else
>> + len += snprintf(buf + len,
>> + PAGE_SIZE - len,
>> + "]\n");
>> + }
>> + };
>> +
>> + return len;
>> +}
>> +
>> +static ssize_t iio_read_channel_info_avail(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>> + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
>> + const int *vals;
>> + int ret;
>> + int length;
>> + int type;
>> +
>> + ret = indio_dev->info->read_avail(indio_dev, this_attr->c,
>> + &vals, &type, &length,
>> + this_attr->address);
>> +
>> + if (ret < 0)
>> + return ret;
>> + switch (ret) {
>> + case IIO_AVAIL_LIST:
>> + return iio_format_avail_list(buf, vals, type, length);
>> + case IIO_AVAIL_RANGE:
>> + return iio_format_avail_range(buf, vals, type);
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> /**
>> * iio_str_to_fixpoint() - Parse a fixed-point number from a string
>> * @str: The string to parse
>> @@ -978,6 +1096,40 @@ static int iio_device_add_info_mask_type(struct iio_dev *indio_dev,
>> return attrcount;
>> }
>>
>> +static int iio_device_add_info_mask_type_avail(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan,
>> + enum iio_shared_by shared_by,
>> + const long *infomask)
>> +{
>> + int i, ret, attrcount = 0;
>> + char *avail_postfix;
>> +
>> + for_each_set_bit(i, infomask, sizeof(infomask) * 8) {
>> + avail_postfix = kasprintf(GFP_KERNEL,
>> + "%s_available",
>> + iio_chan_info_postfix[i]);
>> + if (!avail_postfix)
>> + return -ENOMEM;
>> +
>> + ret = __iio_add_chan_devattr(avail_postfix,
>> + chan,
>> + &iio_read_channel_info_avail,
>> + NULL,
>> + i,
>> + shared_by,
>> + &indio_dev->dev,
>> + &indio_dev->channel_attr_list);
>> + kfree(avail_postfix);
>> + if ((ret == -EBUSY) && (shared_by != IIO_SEPARATE))
>> + continue;
>> + else if (ret < 0)
>> + return ret;
>> + attrcount++;
>> + }
>> +
>> + return attrcount;
>> +}
>> +
>> static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
>> struct iio_chan_spec const *chan)
>> {
>> @@ -993,6 +1145,14 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
>> return ret;
>> attrcount += ret;
>>
>> + ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
>> + IIO_SEPARATE,
>> + &chan->
>> + info_mask_separate_available);
>> + if (ret < 0)
>> + return ret;
>> + attrcount += ret;
>> +
>> ret = iio_device_add_info_mask_type(indio_dev, chan,
>> IIO_SHARED_BY_TYPE,
>> &chan->info_mask_shared_by_type);
>> @@ -1000,6 +1160,14 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
>> return ret;
>> attrcount += ret;
>>
>> + ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
>> + IIO_SHARED_BY_TYPE,
>> + &chan->
>> + info_mask_shared_by_type_available);
>> + if (ret < 0)
>> + return ret;
>> + attrcount += ret;
>> +
>> ret = iio_device_add_info_mask_type(indio_dev, chan,
>> IIO_SHARED_BY_DIR,
>> &chan->info_mask_shared_by_dir);
>> @@ -1007,6 +1175,13 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
>> return ret;
>> attrcount += ret;
>>
>> + ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
>> + IIO_SHARED_BY_DIR,
>> + &chan->info_mask_shared_by_dir_available);
>> + if (ret < 0)
>> + return ret;
>> + attrcount += ret;
>> +
>> ret = iio_device_add_info_mask_type(indio_dev, chan,
>> IIO_SHARED_BY_ALL,
>> &chan->info_mask_shared_by_all);
>> @@ -1014,6 +1189,13 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
>> return ret;
>> attrcount += ret;
>>
>> + ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
>> + IIO_SHARED_BY_ALL,
>> + &chan->info_mask_shared_by_all_available);
>> + if (ret < 0)
>> + return ret;
>> + attrcount += ret;
>> +
>> if (chan->ext_info) {
>> unsigned int i = 0;
>> for (ext_info = chan->ext_info; ext_info->name; ext_info++) {
>> diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
>> index b4a0679e4a49..c0f897084620 100644
>> --- a/include/linux/iio/iio.h
>> +++ b/include/linux/iio/iio.h
>> @@ -269,9 +269,13 @@ struct iio_chan_spec {
>> enum iio_endian endianness;
>> } scan_type;
>> long info_mask_separate;
>> + long info_mask_separate_available;
>> long info_mask_shared_by_type;
>> + long info_mask_shared_by_type_available;
>> long info_mask_shared_by_dir;
>> + long info_mask_shared_by_dir_available;
>> long info_mask_shared_by_all;
>> + long info_mask_shared_by_all_available;
>> const struct iio_event_spec *event_spec;
>> unsigned int num_event_specs;
>> const struct iio_chan_spec_ext_info *ext_info;
>> @@ -397,6 +401,13 @@ struct iio_info {
>> int *val_len,
>> long mask);
>>
>> + int (*read_avail)(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan,
>> + const int **vals,
>> + int *type,
>> + int *length,
>> + long mask_el);
>> +
>> int (*write_raw)(struct iio_dev *indio_dev,
>> struct iio_chan_spec const *chan,
>> int val,
>> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
>> index 32b579525004..2aa7b6384d64 100644
>> --- a/include/linux/iio/types.h
>> +++ b/include/linux/iio/types.h
>> @@ -29,4 +29,9 @@ enum iio_event_info {
>> #define IIO_VAL_FRACTIONAL 10
>> #define IIO_VAL_FRACTIONAL_LOG2 11
>>
>> +enum iio_available_type {
>> + IIO_AVAIL_LIST,
>> + IIO_AVAIL_RANGE,
>> +};
>> +
>> #endif /* _IIO_TYPES_H_ */
>>
>

\
 
 \ /
  Last update: 2016-10-24 00:27    [W:0.184 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site