lkml.org 
[lkml]   [2016]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/4] IIO wrapper drivers, dpot-dac and envelope-detector
From
Date
On 2016-10-21 09:17, jic23@kernel.org wrote:
> On 20.10.2016 19:17, Peter Rosin wrote:
>> On 2016-10-20 19:37, Jonathan Cameron wrote:
>>> On 20 October 2016 18:30:19 BST, Jonathan Cameron
>>> <jic23@jic23.retrosnub.co.uk> wrote:
>>>> On 20 October 2016 13:55:12 BST, Lars-Peter Clausen <lars@metafoo.de>
>>>> wrote:
>>>>> On 10/20/2016 11:25 AM, Peter Rosin wrote:
>>>>>> Also, is there some agreed-upon way to dig out the maximum value
>>>>>> from
>>>>>> an iio channel? If so, "dpot-dac,max-ohms" can be eliminated from
>>>>>> the
>>>>>> dt bindings, which would have been nice...
>>>>>
>>>>> Yes, this is something we could really use. In a sense it exists for
>>>>> the
>>>>> devices with buffer-capable channels where there is the real_bits
>>>>> field
>>>>> which tells us the data width of the channel. But a dedicated
>>>>> mechanism
>>>>> for
>>>>> querying the maximum (and minimum) valid code seems like a useful
>>>>> feature.
>>>>> Not only for in-kernel clients, but also for userspace.
>>>>
>>>> This was something that was addressed by the rather ancient patch
>>>> series i posted that added
>>>> an available call back which provided info on range and values for
>>>> all info mask elements.
>>>> Series got buried by there being a lot of precursors but quite a few of
>>>> those have merged since.
>>>>
>>>> Hmm Google won't let me find it on my phone. Was a while back now.
>>>> Will
>>>> try to get on pc with
>>>> decent email archive later and dig out a reference.
>>> http://marc.info/?l=linux-iio&m=138469765309868&w=2 I think...
>>
>> Interesting, one issue with that is that it is all in real world
>> units, while I'd rather have the raw value.
> Um.. It's been a while, but the principle was (IIRC) that every
> _available would match the units fo the associated info mask element.
> Thus if you have a _raw element it would be in adc counts (most likely).
>
> _input would be in relevant real world units, scale etc in the whatever
> units the value itself is in.

Ok, so I forward ported that patch and added code so that the relevant
channels provide what is available. I also added code to turn the
rest of the parameter style devicetree properties into iio device/channel
attributes. So, it is now much neater from a bindings point of view.

Before I post the updated patches, I'm wondering what the status is
on that ancient patch? It didn't forward port without issues, but there
were no real difficulties that I noticed. Should I just start off my v2
series with that patch? I tend to think that that's the best option,
because I suspect that adding a "max-ohms" devicetree property as a
stop-gap pending some new infrastructure is pretty unrealistic...

Basically, my question is if that ancient patch as any chance of living
at all in a form close to what it is, or if should start looking for
an alternative right away?

Cheers,
Peter

\
 
 \ /
  Last update: 2016-10-22 07:33    [W:0.094 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site