lkml.org 
[lkml]   [2016]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] Cavium ThunderX uncore PMU support
Date
Sorry for the long time it took for re-cooking this patch set.
The v3 should address all of Marks previous comments, things I didn't
change are listed below.

Not changed:
- Stick to NUMA node ID to detect the socket a device belongs to but made
uncore depend on CONFIG_NUMA.
- Stick to initcall for uncore framework because it is easier to do the
scanning for the same type of PCI devices, also I don't know if the PCI layer
would allow for several drivers to register for the same device ID.

Note:
I'm using perf_sw_context in difference to perf_invalid_context
(see WARN_ON in perf_pmu_register). Reason is that with perf_invalid_context
add() is never called and the counter results are shown as "unsupported" by
perf. With perf_sw_context everything works as expected.

Patches are against 4.9.0-rc1

Changes to v2:
- Embedded struct pmu and killed uncore->type
- Simplified add functions
- Unified functions where possible into a common implementation
- Use arrays to translate non-contiguous counter addresses to event_id's
visible to the user
- Sorted includes
- Got rid of division for previous counter values
- Removed unneeded WARN_ONs
- Use sizeof(*ptr)
- Use bool for event_valid return
- Fixed HES_STOPPED logic
- Added some design notes and improved (hopefully) comments
- Removed pass1 counter support for now
- Merged EVENT_ATTR and EVENT_PTR defines into one (unreadable) thing
- Use pmu_enable|disable to start|stop the OCX TLK counter set
- Moved cpumask into thunder_uncore struct
- Switched to new cpuhp stuff. I still don't care about the CPU location
used to access an uncore device, it may cross the CCPI and
we'll pay a performance penalty. We might optimize this later, for now
I feel it is not worth the time optimizing it.

------------------------

Jan Glauber (5):
arm64: perf: Basic uncore counter support for Cavium ThunderX SOC
arm64: perf: Cavium ThunderX L2C TAD uncore support
arm64: perf: Cavium ThunderX L2C CBC uncore support
arm64: perf: Cavium ThunderX LMC uncore support
arm64: perf: Cavium ThunderX OCX TLK uncore support

drivers/perf/Kconfig | 13 +
drivers/perf/Makefile | 1 +
drivers/perf/uncore/Makefile | 5 +
drivers/perf/uncore/uncore_cavium.c | 355 ++++++++++++++++++++++++++
drivers/perf/uncore/uncore_cavium.h | 75 ++++++
drivers/perf/uncore/uncore_cavium_l2c_cbc.c | 148 +++++++++++
drivers/perf/uncore/uncore_cavium_l2c_tad.c | 379 ++++++++++++++++++++++++++++
drivers/perf/uncore/uncore_cavium_lmc.c | 118 +++++++++
drivers/perf/uncore/uncore_cavium_ocx_tlk.c | 344 +++++++++++++++++++++++++
include/linux/cpuhotplug.h | 1 +
10 files changed, 1439 insertions(+)
create mode 100644 drivers/perf/uncore/Makefile
create mode 100644 drivers/perf/uncore/uncore_cavium.c
create mode 100644 drivers/perf/uncore/uncore_cavium.h
create mode 100644 drivers/perf/uncore/uncore_cavium_l2c_cbc.c
create mode 100644 drivers/perf/uncore/uncore_cavium_l2c_tad.c
create mode 100644 drivers/perf/uncore/uncore_cavium_lmc.c
create mode 100644 drivers/perf/uncore/uncore_cavium_ocx_tlk.c

--
1.9.1

\
 
 \ /
  Last update: 2016-10-20 11:32    [W:1.266 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site