lkml.org 
[lkml]   [2016]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/4] ARM: dts: pxa: add pxa25x cpu operating points
Date
Viresh Kumar <viresh.kumar@linaro.org> writes:

> On 15-10-16, 21:57, Robert Jarzmik wrote:
>> Add the relevant data taken from the PXA 25x Electrical, Mechanical, and
>> Thermal Specfication. This will be input data for cpufreq-dt driver.
>>
>> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
>> ---
>> arch/arm/boot/dts/pxa25x.dtsi | 25 +++++++++++++++++++++++++
>> 1 file changed, 25 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
>> index 0d1e012178c4..16b4e8bad4a5 100644
>> --- a/arch/arm/boot/dts/pxa25x.dtsi
>> +++ b/arch/arm/boot/dts/pxa25x.dtsi
>> @@ -89,4 +89,29 @@
>> clocks = <&clktimer>;
>> status = "okay";
>> };
>> +
>> + pxa250_opp_table: opp_table0 {
>> + compatible = "operating-points-v2";
>> +
>> + opp@99500 {
>
> We have been keeping the values in ^^^ same as the values present
> below. Any specific reason for making it different here ?
No, that's a good comment, I'll change that.

I wrote this incrementaly, first the node, then the opp-hz. Then I realized that
the source crystal, at 3.8684 MHz didn't provide a round 99.5 MHz core clock,
but a 99.5328 MHz clock.

Anyway, I'll change that ... let's say into opp@99533 in this case ?

--
Robert

\
 
 \ /
  Last update: 2016-10-18 17:31    [W:0.077 / U:0.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site