lkml.org 
[lkml]   [2016]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 02/10] mfd: dt-bindings: Add bindings for the Juniper I2CS MFD
From
Date
Hi Rob,

> On Oct 10, 2016, at 23:23 , Rob Herring <robh@kernel.org> wrote:
>
> On Fri, Oct 07, 2016 at 06:21:01PM +0300, Pantelis Antoniou wrote:
>> From: Georgi Vlaev <gvlaev@juniper.net>
>>
>> Add device tree bindings for the Juniper I2CS MFD driver.
>>
>> Signed-off-by: Georgi Vlaev <gvlaev@juniper.net>
>> [Ported from Juniper kernel]
>> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
>> ---
>> Documentation/devicetree/bindings/mfd/jnx-i2cs.txt | 68 ++++++++++++++++++++++
>> 1 file changed, 68 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
>> new file mode 100644
>> index 0000000..0ec103b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/jnx-i2cs.txt
>> @@ -0,0 +1,68 @@
>> +Device-Tree bindings for Juniper Networks I2CS FPGA MFD
>> +
>> +Required properties:
>> +- compatible - Must be one of:
>> + "jnx,i2cs-rcb" (Routing Engine or Control Board FRUs)
>> + "jnx,i2cs-fpc" (Flexible Port Concentrator FRUs)
>> + "jnx,i2cs-sib" (Switching Interface Board FRUs)
>> + "jnx,i2cs-fan" (Fan Tray FRUs)
>> +
>> +Optional properties:
>> +
>> +Depending on the FRU, the I2CS MFD has varied group of sub-devices:
>> +
>> +Device Description
>> +------ -----------
>> +jnx,i2cs-gpio : Virtual gpio mapping driver
>> +jnx,i2cs-fan-hwmon : hwmon driver for fan trays
>> +jnx,i2c-mux-i2cs : I2C Mux driver for FPC FRUs
>> +jnx,leds-i2cs : Led driver
>> +
>> +All these optional nodes are described in their respective binding
>> +documents.
>> +
>> +Example node:
>> +
>> +i2cs@54 {
>> + compatible = "jnx,i2cs-fpc";
>> + reg = <0x54>;
>> + #address-cells = <0>;
>> + #size-cells = <0>;
>> +
>> + fpc2_mux {
>
> Generic node names please.
>

OK.

> mux {
>
>> + compatible = "jnx,i2c-mux-i2cs";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + fpc2i2c0: i2c@0 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0>;
>> + };
>> + };
>> +
>> + fpc2_gpiomap: gpio-jnx-i2cs {
>
> gpio@54 {
>
OK

>> + compatible = "jnx,gpio-i2cs";
>> + reg = <0x54>;
>> + #gpio-cells = <2>;
>> + gpio-controller;
>> + interrupt-controller;
>> +
>> + /*
>> + * Map bits [0-3] of reg 0x21 as gpio inputs, bits [4-7]
>> + * as gpio outputs
>> + */
>> + i2c-gpio-map = <0x21 0x0f>;
>> + };
>> +
>> + leds-jnx-i2cs {
>
> leds {
>

OK.

>> + compatible = "jnx,leds-i2cs";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + sib8-active {
>> + reg = <0>;
>> + linux,default-trigger = "sib8-active";
>> + };
>> + };
>> +};
>> --
>> 1.9.1

\
 
 \ /
  Last update: 2016-10-17 21:10    [W:0.057 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site