lkml.org 
[lkml]   [2016]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 07/13] bindings: gpio-sx150x: Document "semtech,io-pull*" bindings
Date
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
Documentation/devicetree/bindings/gpio/gpio-sx150x.txt | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt b/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
index 02b92ae..7574137 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
@@ -35,6 +35,14 @@ Optional properties:
polarity. For chips with fewer than 16 IO pins,
high-end bits are ignored.

+- semtech,io-pullup:
+- semtech,io-pulldown: A bit-mask which enables-or disables the
+ pull-up (pull-down) resistor for each IO line
+ in the expander. Setting the bit at position n
+ will enable the pull-down for the IO at the
+ corresponding offset. For chips with fewer
+ than 16 IO pins, high-end bits are ignored.
+
Example:

i2c_gpio_expander@20{
--
2.5.5
\
 
 \ /
  Last update: 2016-10-17 16:30    [W:0.074 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site