lkml.org 
[lkml]   [2016]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mfd: rk808: RK818 uses DEV_OFF to power off supplies
Date
DEV_OFF and DEV_OFF_RST functions for RK808 are designed error that
only DEV_OFF_RST can power off supplies. RK818 has been fixed this
issue, so that DEV_OFF is used to power off supplies.

Signed-off-by: Jianhong Chen <chenjh@rock-chips.com>
---
drivers/mfd/rk808.c | 23 ++++++++++++++++++++++-
include/linux/mfd/rk808.h | 1 +
2 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 0f8acc5..2c9acdb 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -290,6 +290,24 @@ static void rk808_device_shutdown(void)
dev_err(&rk808_i2c_client->dev, "power off error!\n");
}

+static void rk818_device_shutdown(void)
+{
+ int ret;
+ struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
+
+ if (!rk808) {
+ dev_warn(&rk808_i2c_client->dev,
+ "have no rk818, so do nothing here\n");
+ return;
+ }
+
+ ret = regmap_update_bits(rk808->regmap,
+ RK818_DEVCTRL_REG,
+ DEV_OFF, DEV_OFF);
+ if (ret)
+ dev_err(&rk808_i2c_client->dev, "power off error!\n");
+}
+
static const struct of_device_id rk808_of_match[] = {
{ .compatible = "rockchip,rk808" },
{ .compatible = "rockchip,rk818" },
@@ -304,6 +322,7 @@ static int rk808_probe(struct i2c_client *client,
struct rk808 *rk808;
const struct rk808_reg_data *pre_init_reg;
const struct mfd_cell *cells;
+ void (*pm_pwroff_fn)(void);
int nr_pre_init_regs;
int nr_cells;
int pm_off = 0;
@@ -331,6 +350,7 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
cells = rk808s;
nr_cells = ARRAY_SIZE(rk808s);
+ pm_pwroff_fn = rk808_device_shutdown;
break;
case RK818_ID:
rk808->regmap_cfg = &rk818_regmap_config;
@@ -339,6 +359,7 @@ static int rk808_probe(struct i2c_client *client,
nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
cells = rk818s;
nr_cells = ARRAY_SIZE(rk818s);
+ pm_pwroff_fn = rk818_device_shutdown;
break;
default:
dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
@@ -393,7 +414,7 @@ static int rk808_probe(struct i2c_client *client,
"rockchip,system-power-controller");
if (pm_off && !pm_power_off) {
rk808_i2c_client = client;
- pm_power_off = rk808_device_shutdown;
+ pm_power_off = pm_pwroff_fn;
}

return 0;
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 6d435a3..83701ef 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -290,6 +290,7 @@ enum rk818_reg {
#define SWITCH2_EN BIT(6)
#define SWITCH1_EN BIT(5)
#define DEV_OFF_RST BIT(3)
+#define DEV_OFF BIT(0)

#define VB_LO_ACT BIT(4)
#define VB_LO_SEL_3500MV (7 << 0)
--
1.9.1

\
 
 \ /
  Last update: 2016-10-17 11:07    [W:0.081 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site