lkml.org 
[lkml]   [2016]   [Oct]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v17 1/4] usb: gadget: Introduce the usb charger framework
Hi Baolu,

On 11 October 2016 at 10:59, Lu Baolu <baolu.lu@linux.intel.com> wrote:
> Hi Baolin,
>
> Some review comments below.
>
> On 10/10/2016 02:22 PM, Baolin Wang wrote:
>> This patch introduces the usb charger driver based on usb gadget that
>> makes an enhancement to a power driver. It works well in practice but
>> that requires a system with suitable hardware.
>>
>> The basic conception of the usb charger is that, when one usb charger
>> is added or removed by reporting from the usb gadget state change or
>> the extcon device state change, the usb charger will report to power
>> user to set the current limitation.
>>
>> The usb charger will register notifiees on the usb gadget or the extcon
>> device to get notified the usb charger state. It also supplies the
>> notification mechanism to userspace When the usb charger state is changed.
>>
>> Power user will register a notifiee on the usb charger to get notified
>> by status changes from the usb charger. It will report to power user
>> to set the current limitation when detecting the usb charger is added
>> or removed from extcon device state or usb gadget state.
>>
>> This patch doesn't yet integrate with the gadget code, so some functions
>> which rely on the 'gadget' are not completed, that will be implemented
>> in the following patches.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> Reviewed-by: Li Jun <jun.li@nxp.com>
>> Tested-by: Li Jun <jun.li@nxp.com>
>> ---
>> drivers/usb/gadget/Kconfig | 8 +
>> drivers/usb/gadget/udc/Makefile | 1 +
>> drivers/usb/gadget/udc/charger.c | 785 ++++++++++++++++++++++++++++++++++++++
>> include/linux/usb/charger.h | 186 +++++++++
>> include/uapi/linux/usb/charger.h | 31 ++
>> 5 files changed, 1011 insertions(+)
>> create mode 100644 drivers/usb/gadget/udc/charger.c
>> create mode 100644 include/linux/usb/charger.h
>> create mode 100644 include/uapi/linux/usb/charger.h
>>
>> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
>> index 2ea3fc3..7520677 100644
>> --- a/drivers/usb/gadget/Kconfig
>> +++ b/drivers/usb/gadget/Kconfig
>> @@ -134,6 +134,14 @@ config U_SERIAL_CONSOLE
>> help
>> It supports the serial gadget can be used as a console.
>>
>> +config USB_CHARGER
>> + bool "USB charger support"
>> + select EXTCON
>> + help
>> + The usb charger driver based on the usb gadget that makes an
>> + enhancement to a power driver which can set the current limitation
>> + when the usb charger is added or removed.
>> +
>> source "drivers/usb/gadget/udc/Kconfig"
>>
>> #
>> diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
>> index 98e74ed..ede2351 100644
>> --- a/drivers/usb/gadget/udc/Makefile
>> +++ b/drivers/usb/gadget/udc/Makefile
>> @@ -2,6 +2,7 @@
>> CFLAGS_trace.o := -I$(src)
>>
>> udc-core-y := core.o trace.o
>> +udc-core-$(CONFIG_USB_CHARGER) += charger.o
>>
>> #
>> # USB peripheral controller drivers
>> diff --git a/drivers/usb/gadget/udc/charger.c b/drivers/usb/gadget/udc/charger.c
>> new file mode 100644
>> index 0000000..16dc477
>> --- /dev/null
>> +++ b/drivers/usb/gadget/udc/charger.c
>> @@ -0,0 +1,785 @@
>> +/*
>> + * charger.c -- USB charger driver
>> + *
>> + * Copyright (C) 2016 Linaro Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/extcon.h>
>> +#include <linux/export.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/usb.h>
>> +#include <linux/usb/ch9.h>
>> +#include <linux/usb/gadget.h>
>> +#include <linux/usb/charger.h>
>> +
>> +/* Default current range by charger type. */
>> +#define DEFAULT_SDP_CUR_MIN 2
>> +#define DEFAULT_SDP_CUR_MAX 500
>> +#define DEFAULT_SDP_CUR_MIN_SS 150
>> +#define DEFAULT_SDP_CUR_MAX_SS 900
>> +#define DEFAULT_DCP_CUR_MIN 500
>> +#define DEFAULT_DCP_CUR_MAX 5000
>> +#define DEFAULT_CDP_CUR_MIN 1500
>> +#define DEFAULT_CDP_CUR_MAX 5000
>> +#define DEFAULT_ACA_CUR_MIN 1500
>> +#define DEFAULT_ACA_CUR_MAX 5000
>> +
>> +static DEFINE_IDA(usb_charger_ida);
>> +static LIST_HEAD(charger_list);
>> +static DEFINE_MUTEX(charger_lock);
>> +
>> +static struct usb_charger *dev_to_uchger(struct device *dev)
>> +{
>> + return NULL;
>> +}
>> +
>> +/*
>> + * charger_current_show() - Show the charger current.
>> + */
>> +static ssize_t charger_current_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct usb_charger *uchger = dev_to_uchger(dev);
>> + unsigned int min, max;
>> +
>> + usb_charger_get_current(uchger, &min, &max);
>> + return sprintf(buf, "%u-%u\n", min, max);
>> +}
>> +static DEVICE_ATTR_RO(charger_current);
>> +
>> +/*
>> + * charger_type_show() - Show the charger type.
>> + *
>> + * It can be SDP/DCP/CDP/ACA type, else for unknown type.
>> + */
>> +static ssize_t charger_type_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct usb_charger *uchger = dev_to_uchger(dev);
>> + int cnt;
>> +
>> + switch (uchger->type) {
>> + case SDP_TYPE:
>> + cnt = sprintf(buf, "%s\n", "SDP");
>> + break;
>> + case DCP_TYPE:
>> + cnt = sprintf(buf, "%s\n", "DCP");
>> + break;
>> + case CDP_TYPE:
>> + cnt = sprintf(buf, "%s\n", "CDP");
>> + break;
>> + case ACA_TYPE:
>> + cnt = sprintf(buf, "%s\n", "ACA");
>> + break;
>> + default:
>> + cnt = sprintf(buf, "%s\n", "UNKNOWN");
>> + break;
>> + }
>> +
>> + return cnt;
>> +}
>> +static DEVICE_ATTR_RO(charger_type);
>> +
>> +/*
>> + * charger_state_show() - Show the charger state.
>> + *
>> + * Charger state can be present or removed.
>> + */
>> +static ssize_t charger_state_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct usb_charger *uchger = dev_to_uchger(dev);
>> + int cnt;
>> +
>> + switch (uchger->state) {
>> + case USB_CHARGER_PRESENT:
>> + cnt = sprintf(buf, "%s\n", "PRESENT");
>> + break;
>> + case USB_CHARGER_REMOVE:
>> + cnt = sprintf(buf, "%s\n", "REMOVE");
>> + break;
>> + default:
>> + cnt = sprintf(buf, "%s\n", "UNKNOWN");
>> + break;
>> + }
>> +
>> + return cnt;
>> +}
>> +static DEVICE_ATTR_RO(charger_state);
>> +
>> +static struct attribute *usb_charger_attrs[] = {
>> + &dev_attr_charger_current.attr,
>> + &dev_attr_charger_type.attr,
>> + &dev_attr_charger_state.attr,
>> + NULL
>> +};
>> +
>> +static const struct attribute_group usb_charger_group = {
>> + .name = "charger",
>> + .attrs = usb_charger_attrs,
>> +};
>> +__ATTRIBUTE_GROUPS(usb_charger);
>> +
>> +/*
>> + * usb_charger_find_by_name() - Get the usb charger instance by name.
>> + * @name - usb charger name.
>> + */
>> +struct usb_charger *usb_charger_find_by_name(const char *name)
>> +{
>> + struct usb_charger *uchger;
>> +
>> + if (WARN(!name, "can't work with NULL name"))
>> + return ERR_PTR(-EINVAL);
>> +
>> + mutex_lock(&charger_lock);
>> + list_for_each_entry(uchger, &charger_list, list) {
>> + if (!strcmp(uchger->name, name))
>> + break;
>> + }
>> + mutex_unlock(&charger_lock);
>> +
>> + if (WARN(!uchger, "can't find usb charger"))
>> + return ERR_PTR(-ENODEV);
>> +
>> + return uchger;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_find_by_name);
>> +
>> +/*
>> + * __usb_charger_get_type() - Get the usb charger type by the callback which
>> + * is implemented by users.
>> + * @uchger - the usb charger instance.
>> + *
>> + * Note: This function is just used for getting the charger type, not for
>> + * detecting charger type which might affect the DP/DM line when gadget is on
>> + * enumeration state.
>> + */
>> +static enum usb_charger_type __usb_charger_get_type(struct usb_charger *uchger)
>> +{
>> + if (uchger->type != UNKNOWN_TYPE)
>> + return uchger->type;
>> +
>> + if (uchger->get_charger_type)
>> + uchger->type = uchger->get_charger_type(uchger);
>> + else
>> + uchger->type = UNKNOWN_TYPE;
>> +
>> + return uchger->type;
>> +}
>> +
>> +/*
>> + * usb_charger_get_type() - get the usb charger type with lock protection.
>> + * @uchger - usb charger instance.
>> + *
>> + * Users can get the charger type by this safe API, rather than using the
>> + * usb_charger structure directly.
>> + */
>> +enum usb_charger_type usb_charger_get_type(struct usb_charger *uchger)
>> +{
>> + enum usb_charger_type type;
>> +
>> + mutex_lock(&uchger->lock);
>> + type = __usb_charger_get_type(uchger);
>> + mutex_unlock(&uchger->lock);
>> +
>> + return type;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_get_type);
>> +
>> +/*
>> + * usb_charger_get_state() - Get the charger state with lock protection.
>> + * @uchger - the usb charger instance.
>> + *
>> + * Users should get the charger state by this safe API.
>> + */
>> +enum usb_charger_state usb_charger_get_state(struct usb_charger *uchger)
>> +{
>> + enum usb_charger_state state;
>> +
>> + mutex_lock(&uchger->lock);
>> + state = uchger->state;
>> + mutex_unlock(&uchger->lock);
>> +
>> + return state;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_get_state);
>> +
>> +/*
>> + * usb_charger_detect_type() - detect the charger type manually.
>> + * @uchger - usb charger instance.
>> + *
>> + * Note: You should ensure you need to detect the charger type manually on your
>> + * platform.
>> + * You should call it at the right gadget state to avoid affecting gadget
>> + * enumeration.
>> + */
>> +int usb_charger_detect_type(struct usb_charger *uchger)
>> +{
>> + enum usb_charger_type type;
>> +
>> + if (!uchger->charger_detect)
>> + return -EINVAL;
>> +
>> + type = uchger->charger_detect(uchger);
>> +
>> + mutex_lock(&uchger->lock);
>> + uchger->type = type;
>> + mutex_unlock(&uchger->lock);
>> +
>> + return 0;
>> +}
>
> Are there any duplicated code in this function and __usb_charger_get_type()?

No. This API is for software detection for charger type. Since we can
detect the charger type by software or hardware.

>
>> +EXPORT_SYMBOL_GPL(usb_charger_detect_type);
>> +
>> +/*
>> + * usb_charger_notify_work() - Notify users the current has changed by work.
>> + * @work - the work instance.
>> + *
>> + * Note: When users receive the charger present event, they should check the
>> + * charger current by usb_charger_get_current() API.
>> + */
>> +static void usb_charger_notify_work(struct work_struct *work)
>> +{
>> + struct usb_charger *uchger = work_to_charger(work);
>> +
>> + mutex_lock(&uchger->lock);
>> + if (uchger->state == USB_CHARGER_PRESENT) {
>> + raw_notifier_call_chain(&uchger->uchger_nh,
>> + USB_CHARGER_PRESENT,
>> + uchger);
>> + }
>> + mutex_unlock(&uchger->lock);
>> +}
>> +
>> +/*
>> + * __usb_charger_set_cur_limit_by_type() - Set the current limitation
>> + * by charger type.
>> + * @uchger - the usb charger instance.
>> + * @type - the usb charger type.
>> + * @cur_limit - the current limitation.
>> + */
>> +static int __usb_charger_set_cur_limit_by_type(struct usb_charger *uchger,
>> + enum usb_charger_type type,
>> + unsigned int cur_limit)
>> +{
>> + switch (type) {
>> + case SDP_TYPE:
>> + uchger->cur.sdp_max = (cur_limit > DEFAULT_SDP_CUR_MAX) ?
>> + DEFAULT_SDP_CUR_MAX : cur_limit;
>> + uchger->sdp_default_cur_change = 1;
>> + break;
>> + case DCP_TYPE:
>> + uchger->cur.dcp_max = (cur_limit > DEFAULT_DCP_CUR_MAX) ?
>> + DEFAULT_DCP_CUR_MAX : cur_limit;
>> + break;
>> + case CDP_TYPE:
>> + uchger->cur.cdp_max = (cur_limit > DEFAULT_CDP_CUR_MAX) ?
>> + DEFAULT_CDP_CUR_MAX : cur_limit;
>> + break;
>> + case ACA_TYPE:
>> + uchger->cur.aca_max = (cur_limit > DEFAULT_ACA_CUR_MAX) ?
>> + DEFAULT_ACA_CUR_MAX : cur_limit;
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * usb_charger_set_cur_limit_by_gadget() - Set the current limitation from
>> + * gadget layer.
>> + * @gadget - the usb gadget device.
>> + * @cur_limit - the current limitation.
>> + *
>> + * Note: This function is used in atomic contexts without mutex lock.
>> + */
>> +int usb_charger_set_cur_limit_by_gadget(struct usb_gadget *gadget,
>> + unsigned int cur_limit)
>> +{
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_set_cur_limit_by_gadget);
>> +
>> +/*
>> + * usb_charger_set_cur_limit_by_type() - Set the current limitation
>> + * by charger type with lock protection.
>> + * @uchger - the usb charger instance.
>> + * @type - the usb charger type.
>> + * @cur_limit - the current limitation.
>> + *
>> + * Users should set the current limitation by this lock protection API.
>> + */
>> +int usb_charger_set_cur_limit_by_type(struct usb_charger *uchger,
>> + enum usb_charger_type type,
>> + unsigned int cur_limit)
>> +{
>> + int ret;
>> +
>> + if (!uchger)
>> + return -EINVAL;
>> +
>> + mutex_lock(&uchger->lock);
>> + ret = __usb_charger_set_cur_limit_by_type(uchger, type, cur_limit);
>> + mutex_unlock(&uchger->lock);
>> +
>> + schedule_work(&uchger->work);
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_set_cur_limit_by_type);
>> +
>> +/*
>> + * usb_charger_set_current() - Set the usb charger current.
>> + * @uchger - the usb charger instance.
>> + * @values - the current setting values.
>> + */
>> +int usb_charger_set_current(struct usb_charger *uchger,
>> + struct usb_charger_current *values)
>> +{
>> + if (!uchger || !values)
>> + return -EINVAL;
>> +
>> + mutex_lock(&uchger->lock);
>> + uchger->cur.sdp_min = values->sdp_min;
>> + uchger->cur.sdp_max = (values->sdp_max > DEFAULT_SDP_CUR_MAX) ?
>> + DEFAULT_SDP_CUR_MAX : values->sdp_max;
>> + uchger->cur.dcp_min = values->dcp_min;
>> + uchger->cur.dcp_max = (values->dcp_max > DEFAULT_DCP_CUR_MAX) ?
>> + DEFAULT_DCP_CUR_MAX : values->dcp_max;
>> + uchger->cur.cdp_min = values->cdp_min;
>> + uchger->cur.cdp_max = (values->cdp_max > DEFAULT_CDP_CUR_MAX) ?
>> + DEFAULT_CDP_CUR_MAX : values->cdp_max;
>> + uchger->cur.aca_min = values->aca_min;
>> + uchger->cur.aca_max = (values->aca_max > DEFAULT_ACA_CUR_MAX) ?
>> + DEFAULT_ACA_CUR_MAX : values->aca_max;
>> + uchger->sdp_default_cur_change = 2;
>> + mutex_unlock(&uchger->lock);
>> +
>> + schedule_work(&uchger->work);
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_set_current);
>> +
>> +/*
>> + * usb_charger_get_current() - Get the charger current with lock protection.
>> + * @uchger - the usb charger instance.
>> + * @min - return the minimum current.
>> + * @max - return the maximum current.
>> + *
>> + * Users should get the charger current by this safe API.
>> + */
>> +int usb_charger_get_current(struct usb_charger *uchger,
>> + unsigned int *min,
>> + unsigned int *max)
>> +{
>> + enum usb_charger_type type;
>> +
>> + if (!uchger)
>> + return -EINVAL;
>> +
>> + mutex_lock(&uchger->lock);
>> + type = __usb_charger_get_type(uchger);
>> +
>> + switch (type) {
>> + case SDP_TYPE:
>> + /*
>> + * For super speed gadget, the default charger maximum current
>> + * should be 900 mA and the default minimum current should be
>> + * 150mA.
>> + */
>> + if (uchger->sdp_default_cur_change != 2 && uchger->gadget &&
>> + uchger->gadget->speed >= USB_SPEED_SUPER) {
>> + if (!uchger->sdp_default_cur_change)
>> + uchger->cur.sdp_max = DEFAULT_SDP_CUR_MAX_SS;
>> + uchger->cur.sdp_min = DEFAULT_SDP_CUR_MIN_SS;
>> + uchger->sdp_default_cur_change = 2;
>> + }
>> +
>> + *min = uchger->cur.sdp_min;
>> + *max = uchger->cur.sdp_max;
>> + break;
>> + case DCP_TYPE:
>> + *min = uchger->cur.dcp_min;
>> + *max = uchger->cur.dcp_max;
>> + break;
>> + case CDP_TYPE:
>> + *min = uchger->cur.cdp_min;
>> + *max = uchger->cur.cdp_max;
>> + break;
>> + case ACA_TYPE:
>> + *min = uchger->cur.aca_min;
>> + *max = uchger->cur.aca_max;
>> + break;
>> + default:
>> + *min = 0;
>> + *max = 0;
>> + break;
>> + }
>> + mutex_unlock(&uchger->lock);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_get_current);
>> +
>> +/*
>> + * usb_charger_register_notify() - Register a notifiee to get notified by
>> + * any attach status changes from the usb charger detection.
>> + * @uchger - the usb charger instance which is monitored.
>> + * @nb - a notifier block to be registered.
>> + */
>> +int usb_charger_register_notify(struct usb_charger *uchger,
>> + struct notifier_block *nb)
>> +{
>> + int ret;
>> +
>> + if (!uchger || !nb) {
>> + pr_err("Charger or nb can not be NULL.\n");
>> + return -EINVAL;
>> + }
>> +
>> + mutex_lock(&uchger->lock);
>> + ret = raw_notifier_chain_register(&uchger->uchger_nh, nb);
>> + mutex_unlock(&uchger->lock);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_register_notify);
>> +
>> +/*
>> + * usb_charger_unregister_notify() - Unregister a notifiee from the usb charger.
>> + * @uchger - the usb charger instance which is monitored.
>> + * @nb - a notifier block to be unregistered.
>> + */
>> +int usb_charger_unregister_notify(struct usb_charger *uchger,
>> + struct notifier_block *nb)
>> +{
>> + int ret;
>> +
>> + if (!uchger || !nb) {
>> + pr_err("Charger or nb can not be NULL.\n");
>> + return -EINVAL;
>> + }
>> +
>> + mutex_lock(&uchger->lock);
>> + ret = raw_notifier_chain_unregister(&uchger->uchger_nh, nb);
>> + mutex_unlock(&uchger->lock);
>> +
>> + return ret;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_unregister_notify);
>> +
>> +/*
>> + * usb_charger_notify_state() - It will notify other device registered
>> + * on usb charger when the usb charger state is changed.
>> + * @uchger - the usb charger instance.
>> + * @state - the state of the usb charger.
>> + *
>> + * Note: When notify the charger present state to power driver, the power driver
>> + * should get the current by usb_charger_get_current() API to set current.
>> + */
>> +static void usb_charger_notify_state(struct usb_charger *uchger,
>> + enum usb_charger_state state)
>> +{
>> + char uchger_state[50] = { 0 };
>> + char *envp[] = { uchger_state, NULL };
>> +
>> + mutex_lock(&uchger->lock);
>> + if (uchger->state == state) {
>> + mutex_unlock(&uchger->lock);
>> + return;
>> + }
>> +
>> + uchger->state = state;
>> +
>> + switch (state) {
>> + case USB_CHARGER_PRESENT:
>> + __usb_charger_get_type(uchger);
>> + raw_notifier_call_chain(&uchger->uchger_nh,
>> + USB_CHARGER_PRESENT,
>> + uchger);
>> + snprintf(uchger_state, ARRAY_SIZE(uchger_state),
>> + "USB_CHARGER_STATE=%s", "USB_CHARGER_PRESENT");
>> + break;
>> + case USB_CHARGER_REMOVE:
>> + uchger->type = UNKNOWN_TYPE;
>> + raw_notifier_call_chain(&uchger->uchger_nh,
>> + USB_CHARGER_REMOVE,
>> + uchger);
>> + snprintf(uchger_state, ARRAY_SIZE(uchger_state),
>> + "USB_CHARGER_STATE=%s", "USB_CHARGER_REMOVE");
>> + break;
>> + default:
>> + pr_warn("Unknown USB charger state: %d\n", state);
>> + mutex_unlock(&uchger->lock);
>> + return;
>> + }
>> +
>> + kobject_uevent_env(&uchger->gadget->dev.kobj, KOBJ_CHANGE, envp);
>> + mutex_unlock(&uchger->lock);
>> +}
>> +
>> +/*
>> + * usb_charger_type_by_extcon() - The notifier call function which is registered
>> + * on the extcon device.
>> + * @nb - the notifier block that notified by extcon device.
>> + * @state - the extcon device state.
>> + * @data - here specify a extcon device.
>> + *
>> + * return the notify flag.
>> + */
>> +static int usb_charger_type_by_extcon(struct notifier_block *nb,
>> + unsigned long state, void *data)
>> +{
>> + struct usb_charger_nb *extcon_nb =
>> + container_of(nb, struct usb_charger_nb, nb);
>> + struct usb_charger *uchger = extcon_nb->uchger;
>> + enum usb_charger_state uchger_state;
>> + enum usb_charger_type type;
>> +
>> + if (WARN(!uchger, "charger can not be NULL"))
>> + return NOTIFY_BAD;
>> +
>> + /* Determine charger type */
>> + if (extcon_get_cable_state_(uchger->extcon_dev,
>> + EXTCON_CHG_USB_SDP) > 0) {
>> + type = SDP_TYPE;
>> + uchger_state = USB_CHARGER_PRESENT;
>> + } else if (extcon_get_cable_state_(uchger->extcon_dev,
>> + EXTCON_CHG_USB_CDP) > 0) {
>> + type = CDP_TYPE;
>> + uchger_state = USB_CHARGER_PRESENT;
>> + } else if (extcon_get_cable_state_(uchger->extcon_dev,
>> + EXTCON_CHG_USB_DCP) > 0) {
>> + type = DCP_TYPE;
>> + uchger_state = USB_CHARGER_PRESENT;
>> + } else if (extcon_get_cable_state_(uchger->extcon_dev,
>> + EXTCON_CHG_USB_ACA) > 0) {
>> + type = ACA_TYPE;
>> + uchger_state = USB_CHARGER_PRESENT;
>> + } else {
>> + type = UNKNOWN_TYPE;
>> + uchger_state = USB_CHARGER_REMOVE;
>> + }
>> +
>> + mutex_lock(&uchger->lock);
>> + uchger->type = type;
>> + mutex_unlock(&uchger->lock);
>> +
>> + usb_charger_notify_state(uchger, uchger_state);
>> +
>> + return NOTIFY_OK;
>> +}
>> +
>> +/*
>> + * usb_charger_plug_by_extcon() - The notifier call function which is registered
>> + * on the extcon device.
>> + * @nb - the notifier block that notified by extcon device.
>> + * @state - the extcon device state.
>> + * @data - here specify a extcon device.
>> + *
>> + * return the notify flag.
>> + */
>> +static int usb_charger_plug_by_extcon(struct notifier_block *nb,
>> + unsigned long state, void *data)
>> +{
>> + struct usb_charger_nb *extcon_nb =
>> + container_of(nb, struct usb_charger_nb, nb);
>> + struct usb_charger *uchger = extcon_nb->uchger;
>> + enum usb_charger_state uchger_state;
>> +
>> + if (WARN(!uchger, "charger can not be NULL"))
>> + return NOTIFY_BAD;
>> +
>> + /*
>> + * Report event to power users to setting the current limitation
>> + * for this usb charger when one usb charger is added or removed
>> + * with detecting by extcon device.
>> + */
>> + if (state)
>> + uchger_state = USB_CHARGER_PRESENT;
>> + else
>> + uchger_state = USB_CHARGER_REMOVE;
>> +
>> + usb_charger_notify_state(uchger, uchger_state);
>> +
>> + return NOTIFY_OK;
>> +}
>> +
>> +/*
>> + * usb_charger_plug_by_gadget() - Set the usb charger current limitation
>> + * according to the usb gadget device state.
>> + * @gadget - the usb gadget device.
>> + * @state - the usb gadget state.
>> + */
>> +int usb_charger_plug_by_gadget(struct usb_gadget *gadget,
>> + unsigned long state)
>> +{
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(usb_charger_plug_by_gadget);
>> +
>> +/*
>> + * usb_charger_register() - Register a new usb charger.
>> + * @uchger - the new usb charger instance.
>> + */
>
> Where is usb_charger_unregister()?

Please see patch 3.

>
>> +static int usb_charger_register(struct usb_charger *uchger)
>> +{
>> + int ret;
>> +
>> + ret = ida_simple_get(&usb_charger_ida, 0, 0, GFP_KERNEL);
>> + if (ret < 0) {
>> + pr_err("Failed to register usb charger: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + uchger->id = ret;
>> + scnprintf(uchger->name, CHARGER_NAME_MAX, "usb-charger.%d", uchger->id);
>> +
>> + ret = sysfs_create_groups(&uchger->gadget->dev.kobj,
>> + usb_charger_groups);
>> + if (ret) {
>> + pr_err("Failed to create usb charger attributes: %d\n", ret);
>> + goto fail;
>> + }
>> +
>> + mutex_lock(&charger_lock);
>> + list_add_tail(&uchger->list, &charger_list);
>> + mutex_unlock(&charger_lock);
>> +
>> + return 0;
>> +
>> +fail:
>> + ida_simple_remove(&usb_charger_ida, uchger->id);
>> + uchger->id = -1;
>> + return ret;
>
> You only have one point to goto here. Why not just move this code block
> to above goto place?

Sure.

>
>> +}
>> +
>> +int usb_charger_init(struct usb_gadget *ugadget)
>> +{
>> + struct usb_charger *uchger;
>> + struct extcon_dev *edev;
>> + int ret;
>> +
>> + uchger = kzalloc(sizeof(struct usb_charger), GFP_KERNEL);
>
> Memory leak. I didn't find kfree() in usb_charger_exit().

Please see patch 3.

>
>> + if (!uchger)
>> + return -ENOMEM;
>> +
>> + uchger->type = UNKNOWN_TYPE;
>> + uchger->state = USB_CHARGER_DEFAULT;
>> + uchger->id = -1;
>> + uchger->sdp_default_cur_change = 0;
>> +
>> + uchger->cur.sdp_min = DEFAULT_SDP_CUR_MIN;
>> + uchger->cur.sdp_max = DEFAULT_SDP_CUR_MAX;
>> + uchger->cur.dcp_min = DEFAULT_DCP_CUR_MIN;
>> + uchger->cur.dcp_max = DEFAULT_DCP_CUR_MAX;
>> + uchger->cur.cdp_min = DEFAULT_CDP_CUR_MIN;
>> + uchger->cur.cdp_max = DEFAULT_CDP_CUR_MAX;
>> + uchger->cur.aca_min = DEFAULT_ACA_CUR_MIN;
>> + uchger->cur.aca_max = DEFAULT_ACA_CUR_MAX;
>> +
>> + mutex_init(&uchger->lock);
>> + RAW_INIT_NOTIFIER_HEAD(&uchger->uchger_nh);
>> + INIT_WORK(&uchger->work, usb_charger_notify_work);
>> +
>> + /* Register a notifier on a extcon device if it is exsited */
>> + edev = extcon_get_edev_by_phandle(ugadget->dev.parent, 0);
>> + if (!IS_ERR_OR_NULL(edev)) {
>> + uchger->extcon_dev = edev;
>> + uchger->extcon_nb.nb.notifier_call = usb_charger_plug_by_extcon;
>> + uchger->extcon_nb.uchger = uchger;
>> + ret = extcon_register_notifier(edev, EXTCON_USB,
>> + &uchger->extcon_nb.nb);
>> + if (ret) {
>> + pr_err("Failed to register extcon USB notifier.\n");
>> + goto fail_extcon;
>> + }
>> +
>> + uchger->extcon_type_nb.nb.notifier_call =
>> + usb_charger_type_by_extcon;
>> + uchger->extcon_type_nb.uchger = uchger;
>> +
>> + ret = extcon_register_notifier(edev, EXTCON_CHG_USB_SDP,
>> + &uchger->extcon_type_nb.nb);
>> + if (ret) {
>> + pr_err("Failed to register extcon USB SDP notifier.\n");
>> + goto fail_extcon_sdp;
>> + }
>> +
>> + ret = extcon_register_notifier(edev, EXTCON_CHG_USB_CDP,
>> + &uchger->extcon_type_nb.nb);
>> + if (ret) {
>> + pr_err("Failed to register extcon USB CDP notifier.\n");
>> + goto fail_extcon_cdp;
>> + }
>> +
>> + ret = extcon_register_notifier(edev, EXTCON_CHG_USB_DCP,
>> + &uchger->extcon_type_nb.nb);
>> + if (ret) {
>> + pr_err("Failed to register extcon USB DCP notifier.\n");
>> + goto fail_extcon_dcp;
>> + }
>> +
>> + ret = extcon_register_notifier(edev, EXTCON_CHG_USB_ACA,
>> + &uchger->extcon_type_nb.nb);
>> + if (ret) {
>> + pr_err("Failed to register extcon USB ACA notifier.\n");
>> + goto fail_extcon_aca;
>> + }
>> + }
>> +
>> + uchger->gadget = ugadget;
>> + uchger->old_gadget_state = USB_STATE_NOTATTACHED;
>> +
>> + /* Register a new usb charger */
>> + ret = usb_charger_register(uchger);
>> + if (ret)
>> + goto fail_register;
>> +
>> + return 0;
>> +
>> +fail_register:
>> + extcon_unregister_notifier(uchger->extcon_dev,
>> + EXTCON_CHG_USB_ACA,
>> + &uchger->extcon_type_nb.nb);
>> +fail_extcon_aca:
>> + extcon_unregister_notifier(uchger->extcon_dev,
>> + EXTCON_CHG_USB_DCP,
>> + &uchger->extcon_type_nb.nb);
>> +fail_extcon_dcp:
>> + extcon_unregister_notifier(uchger->extcon_dev,
>> + EXTCON_CHG_USB_CDP,
>> + &uchger->extcon_type_nb.nb);
>> +fail_extcon_cdp:
>> + extcon_unregister_notifier(uchger->extcon_dev,
>> + EXTCON_CHG_USB_SDP,
>> + &uchger->extcon_type_nb.nb);
>> +fail_extcon_sdp:
>> + extcon_unregister_notifier(uchger->extcon_dev,
>> + EXTCON_USB,
>> + &uchger->extcon_nb.nb);
>> +fail_extcon:
>> + kfree(uchger);
>> +
>> + return ret;
>> +}
>> +
>> +int usb_charger_exit(struct usb_gadget *ugadget)
>> +{
>> + return 0;
>> +}
>> +
>> +MODULE_AUTHOR("Baolin Wang <baolin.wang@linaro.org>");
>> +MODULE_DESCRIPTION("USB charger driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/include/linux/usb/charger.h b/include/linux/usb/charger.h
>> new file mode 100644
>> index 0000000..7819eac
>> --- /dev/null
>> +++ b/include/linux/usb/charger.h
>> @@ -0,0 +1,186 @@
>> +#ifndef __LINUX_USB_CHARGER_H__
>> +#define __LINUX_USB_CHARGER_H__
>> +
>> +#include <uapi/linux/usb/ch9.h>
>> +#include <uapi/linux/usb/charger.h>
>> +
>> +#define CHARGER_NAME_MAX 30
>> +#define work_to_charger(w) (container_of((w), struct usb_charger, work))
>> +
>> +/* Current range by charger type */
>> +struct usb_charger_current {
>> + unsigned int sdp_min;
>> + unsigned int sdp_max;
>> + unsigned int dcp_min;
>> + unsigned int dcp_max;
>> + unsigned int cdp_min;
>> + unsigned int cdp_max;
>> + unsigned int aca_min;
>> + unsigned int aca_max;
>> +};
>> +
>> +struct usb_charger_nb {
>> + struct notifier_block nb;
>> + struct usb_charger *uchger;
>> +};
>> +
>> +/**
>> + * struct usb_charger - describe one usb charger
>> + * @name: Charger name.
>> + * @list: For linking usb charger instances into one global list.
>> + * @uchger_nh: Notifier head for users to register.
>> + * @lock: Protect the notifier head and charger.
>> + * @id: The charger id.
>> + * @type: The charger type, it can be SDP_TYPE, DCP_TYPE, CDP_TYPE or
>> + * ACA_TYPE.
>> + * @state: Indicate the charger state.
>> + * @cur: Describe the current range by charger type.
>> + * @work: Workqueue to be used for reporting users current has changed.
>> + * @extcon_dev: For supporting extcon usb gpio device to detect usb cable
>> + * event (plugin or not).
>> + * @extcon_nb: Report the events to charger from extcon device.
>> + * @extcon_type_nb: Report the charger type from extcon device.
>> + * @gadget: One usb charger is always tied to one usb gadget.
>> + * @old_gadget_state: Record the previous state of one usb gadget to check if
>> + * the gadget state is changed. If gadget state is changed, then notify the
>> + * event to charger.
>> + * @sdp_default_cur_change: Check if it is needed to change the SDP charger
>> + * default maximum current.
>> + * @get_charger_type: User can get charger type by implementing this callback.
>> + * @charger_detect: Charger detection method can be implemented if you need to
>> + * manually detect the charger type.
>> + *
>> + * Users can set 'get_charger_type' and 'charger_detect' callbacks directly
>> + * according to their own requirements. Beyond that, users can not touch
>> + * anything else directly in this structure.
>> + */
>> +struct usb_charger {
>> + char name[CHARGER_NAME_MAX];
>> + struct list_head list;
>> + struct raw_notifier_head uchger_nh;
>> + struct mutex lock;
>
> Needs comments for lock.

I think the above kernel doc has explained this.

>
>> + int id;
>> + enum usb_charger_type type;
>> + enum usb_charger_state state;
>> + struct usb_charger_current cur;
>> + struct work_struct work;
>> +
>> + struct extcon_dev *extcon_dev;
>> + struct usb_charger_nb extcon_nb;
>> + struct usb_charger_nb extcon_type_nb;
>> +
>> + struct usb_gadget *gadget;
>> + enum usb_device_state old_gadget_state;
>> + unsigned int sdp_default_cur_change;
>> +
>> + enum usb_charger_type (*get_charger_type)(struct usb_charger *);
>> + enum usb_charger_type (*charger_detect)(struct usb_charger *);
>> +};
>> +
>> +#ifdef CONFIG_USB_CHARGER
>> +extern struct usb_charger *usb_charger_find_by_name(const char *name);
>> +
>> +extern int usb_charger_register_notify(struct usb_charger *uchger,
>> + struct notifier_block *nb);
>> +extern int usb_charger_unregister_notify(struct usb_charger *uchger,
>> + struct notifier_block *nb);
>> +
>> +extern int usb_charger_set_current(struct usb_charger *uchger,
>> + struct usb_charger_current *values);
>> +extern int usb_charger_get_current(struct usb_charger *uchger,
>> + unsigned int *min, unsigned int *max);
>> +
>> +extern int usb_charger_set_cur_limit_by_type(struct usb_charger *uchger,
>> + enum usb_charger_type type,
>> + unsigned int cur_limit);
>> +extern int usb_charger_set_cur_limit_by_gadget(struct usb_gadget *gadget,
>> + unsigned int cur_limit);
>> +
>> +extern int usb_charger_plug_by_gadget(struct usb_gadget *gadget,
>> + unsigned long state);
>> +extern enum usb_charger_type usb_charger_get_type(struct usb_charger *uchger);
>> +extern int usb_charger_detect_type(struct usb_charger *uchger);
>> +extern enum usb_charger_state usb_charger_get_state(struct usb_charger *uchger);
>> +
>> +extern int usb_charger_init(struct usb_gadget *ugadget);
>> +extern int usb_charger_exit(struct usb_gadget *ugadget);
>
> You don't need to put "extern" here.
>
> Please use "scripts/checkpatch.pl --strict" to check this.

Sure. Thanks.

>
>> +#else
>> +static inline struct usb_charger *usb_charger_find_by_name(const char *name)
>> +{
>> + return ERR_PTR(-ENODEV);
>> +}
>> +
>> +static inline int usb_charger_register_notify(struct usb_charger *uchger,
>> + struct notifier_block *nb)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline int usb_charger_unregister_notify(struct usb_charger *uchger,
>> + struct notifier_block *nb)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline int usb_charger_set_current(struct usb_charger *uchger,
>> + struct usb_charger_current *values)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline int usb_charger_get_current(struct usb_charger *uchger,
>> + unsigned int *min, unsigned int *max)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline int
>> +usb_charger_set_cur_limit_by_type(struct usb_charger *uchger,
>> + enum usb_charger_type type,
>> + unsigned int cur_limit)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline int
>> +usb_charger_set_cur_limit_by_gadget(struct usb_gadget *gadget,
>> + unsigned int cur_limit)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline enum usb_charger_type
>> +usb_charger_get_type(struct usb_charger *uchger)
>> +{
>> + return UNKNOWN_TYPE;
>> +}
>> +
>> +static inline enum usb_charger_state
>> +usb_charger_get_state(struct usb_charger *uchger)
>> +{
>> + return USB_CHARGER_REMOVE;
>> +}
>> +
>> +static inline int usb_charger_detect_type(struct usb_charger *uchger)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline int usb_charger_plug_by_gadget(struct usb_gadget *gadget,
>> + unsigned long state)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline int usb_charger_init(struct usb_gadget *ugadget)
>> +{
>> + return 0;
>> +}
>> +
>> +static inline int usb_charger_exit(struct usb_gadget *ugadget)
>> +{
>> + return 0;
>> +}
>> +#endif
>> +
>> +#endif /* __LINUX_USB_CHARGER_H__ */
>> diff --git a/include/uapi/linux/usb/charger.h b/include/uapi/linux/usb/charger.h
>> new file mode 100644
>> index 0000000..3c56ec4
>> --- /dev/null
>> +++ b/include/uapi/linux/usb/charger.h
>> @@ -0,0 +1,31 @@
>> +/*
>> + * This file defines the USB charger type and state that are needed for
>> + * USB device APIs.
>> + */
>> +
>> +#ifndef _UAPI__LINUX_USB_CHARGER_H
>> +#define _UAPI__LINUX_USB_CHARGER_H
>> +
>> +/*
>> + * USB charger type:
>> + * SDP (Standard Downstream Port)
>> + * DCP (Dedicated Charging Port)
>> + * CDP (Charging Downstream Port)
>> + * ACA (Accessory Charger Adapters)
>> + */
>> +enum usb_charger_type {
>> + UNKNOWN_TYPE,
>> + SDP_TYPE,
>> + DCP_TYPE,
>> + CDP_TYPE,
>> + ACA_TYPE,
>> +};
>> +
>> +/* USB charger state */
>> +enum usb_charger_state {
>> + USB_CHARGER_DEFAULT,
>> + USB_CHARGER_PRESENT,
>> + USB_CHARGER_REMOVE,
>> +};
>> +
>> +#endif /* _UAPI__LINUX_USB_CHARGER_H */
>
> Best regards,
> Lu Baolu



--
Baolin.wang
Best Regards

\
 
 \ /
  Last update: 2016-10-11 06:06    [W:0.068 / U:1.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site