lkml.org 
[lkml]   [2016]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] power: add documentation for ACT8945A's charger DT bindings
Date
This patch adds documentation for the DT bindings of the charger
subdevice of ACT8945A MFD.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

.../devicetree/bindings/power/act8945a-charger.txt | 34 ++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/act8945a-charger.txt

diff --git a/Documentation/devicetree/bindings/power/act8945a-charger.txt b/Documentation/devicetree/bindings/power/act8945a-charger.txt
new file mode 100644
index 0000000..868e0164
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/act8945a-charger.txt
@@ -0,0 +1,34 @@
+Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
+
+Required properties:
+ - compatible: "active-semi,act8945a-charger"
+ - active-semi,chglev-gpio = Specifies a gpio that uses to select
+ the charge current level.
+
+Optional properties:
+ - active-semi,battery_temperature: Indicates if it is allowed to check
+ the battery temperature. If it is missing, assume the battery temperature
+ is not allowed to check.
+ - active-semi,input_voltage_threshold: unit: mV;
+ Specifies the charger's input over-voltage threshold value;
+ The value can be: 6600, 7000, 7500, 8000; default: 6600
+ - active-semi,precondition_timeout: unit: minutes;
+ Specifies the charger's PRECONDITION safety timer setting value;
+ The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
+ default: 40.
+ - active-semi,total_timeout: unit: hours;
+ Specifies the charger's total safety timer setting value;
+ The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
+ default: 3.
+
+Example:
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev>;
+ active-semi,chglev-gpio = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,input_voltage_threshold = <6600>;
+ active-semi,precondition_timeout = <40>;
+ active-semi,total_timeout = <3>;
+ };
--
1.7.9.5
\
 
 \ /
  Last update: 2016-01-08 03:41    [W:0.117 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site