lkml.org 
[lkml]   [2016]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch v6 1/3] media: ti-vpe: Document CAL driver
Date
Device Tree bindings for the Camera Adaptation Layer (CAL) driver

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/media/ti-cal.txt | 72 ++++++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/ti-cal.txt

diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
new file mode 100644
index 000000000000..ae9b52f37576
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti-cal.txt
@@ -0,0 +1,72 @@
+Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
+------------------------------------------------------
+
+The Camera Adaptation Layer (CAL) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect CSI2 image-sensor modules to the
+DRA72x device.
+
+Required properties:
+- compatible: must be "ti,dra72-cal"
+- reg: CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
+ control address space
+- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control
+ registers
+- interrupts: should contain IRQ line for the CAL;
+
+CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
+should contain a 'port' child node with child 'endpoint' node. Please
+refer to the bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ cal: cal@4845b000 {
+ compatible = "ti,dra72-cal";
+ ti,hwmods = "cal";
+ reg = <0x4845B000 0x400>,
+ <0x4845B800 0x40>,
+ <0x4845B900 0x40>,
+ <0x4A002e94 0x4>;
+ reg-names = "cal_top",
+ "cal_rx_core0",
+ "cal_rx_core1",
+ "camerrx_control";
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ endpoint {
+ slave-mode;
+ remote-endpoint = <&ar0330_1>;
+ };
+ };
+ csi2_1: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ i2c5: i2c@4807c000 {
+ ar0330@10 {
+ compatible = "ti,ar0330";
+ reg = <0x10>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ar0330_1: endpoint {
+ reg = <0>;
+ clock-lanes = <1>;
+ data-lanes = <0 2 3 4>;
+ remote-endpoint = <&csi2_0>;
+ };
+ };
+ };
+ };
--
1.8.5.1


\
 
 \ /
  Last update: 2016-01-07 01:21    [W:0.063 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site