lkml.org 
[lkml]   [2016]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/4] thermal: add sys node for k_pu_ratio/k_po_ratio
Date
Add two sys nodes for k_pu_ratio and k_po_ratio, so user can set ratio
value from them. Also change k_pu/k_po as read only nodes, it will only
be used to show proportional term constants which are calculated by
ratio.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
drivers/thermal/thermal_core.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index d9e525c..bc149a67 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -955,8 +955,25 @@ static DEVICE_ATTR(sustainable_power, S_IWUSR | S_IRUGO, sustainable_power_show,
} \
static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, name##_show, name##_store)

-create_s32_tzp_attr(k_po);
-create_s32_tzp_attr(k_pu);
+
+#define create_s32_tzp_attr_ro(name) \
+ static ssize_t \
+ name##_show(struct device *dev, struct device_attribute *devattr, \
+ char *buf) \
+ { \
+ struct thermal_zone_device *tz = to_thermal_zone(dev); \
+ \
+ if (tz->tzp) \
+ return sprintf(buf, "%u\n", tz->tzp->name); \
+ else \
+ return -EIO; \
+ } \
+ static DEVICE_ATTR(name, S_IRUGO, name##_show, NULL)
+
+create_s32_tzp_attr_ro(k_po);
+create_s32_tzp_attr_ro(k_pu);
+create_s32_tzp_attr(k_po_ratio);
+create_s32_tzp_attr(k_pu_ratio);
create_s32_tzp_attr(k_i);
create_s32_tzp_attr(k_d);
create_s32_tzp_attr(integral_cutoff);
@@ -968,6 +985,8 @@ static struct device_attribute *dev_tzp_attrs[] = {
&dev_attr_sustainable_power,
&dev_attr_k_po,
&dev_attr_k_pu,
+ &dev_attr_k_po_ratio,
+ &dev_attr_k_pu_ratio,
&dev_attr_k_i,
&dev_attr_k_d,
&dev_attr_integral_cutoff,
--
1.9.1


\
 
 \ /
  Last update: 2016-01-06 09:41    [W:0.148 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site